From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mga02.intel.com ([134.134.136.20]:22951 "EHLO mga02.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752368AbaHNNK5 (ORCPT ); Thu, 14 Aug 2014 09:10:57 -0400 Message-ID: <53ECB86D.6090102@linux.intel.com> Date: Thu, 14 Aug 2014 16:23:57 +0300 From: Mathias Nyman MIME-Version: 1.0 To: Udo van den Heuvel , Hans Verkuil , Laurent Pinchart CC: Hans de Goede , USB list , linux-media@vger.kernel.org Subject: Re: 3.15.6 USB issue with pwc cam References: <53DCE329.4030106@xs4all.nl> <53EA2DA2.4060605@redhat.com> <53EA350F.2040403@xs4all.nl> <6676742.btapbsDqkp@avalon> <53EA4057.4020103@xs4all.nl> <53EA4177.7000406@xs4all.nl> In-Reply-To: <53EA4177.7000406@xs4all.nl> Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: On 08/12/2014 07:31 PM, Udo van den Heuvel wrote: > On 2014-08-12 18:27, Hans Verkuil wrote: >> It was a bit confusing, but he has two problems: one pwc, one (the warning) for >> uvc. > > Indeed. > Do I need to provide additional info to help find the root cause(s)? > > Could you help me take a look at the xhci side. The error: [53009.847233] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11. Means we got a parameter error, one of the values the xhci driver sends to the controller in the configure endpoint command is invalid. This error is causing the "Not enough bandwidth" entries in the log as well, not really a bandwidth error. Can you add dynamic debugging, mount debugfs, and do: echo -n 'module xhci_hcd =p' > /sys/kernel/debug/dynamic_debug/control Then plug in your usb, and send me the output. It should print out the whole input context (all parameters) used in the configure endpoint command -Mathias