From: Hans Verkuil <hverkuil@xs4all.nl>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-usb@vger.kernel.org
Cc: linux-media@vger.kernel.org,
Andrzej Pietrasiewicz <andrzej.p@samsung.com>,
Michael Grzeschik <mgr@pengutronix.de>
Subject: Re: [PATCH 2/2] usb: gadget: f_uvc: Move to video_ioctl2
Date: Mon, 18 Aug 2014 18:24:26 +0000 [thread overview]
Message-ID: <53F244DA.3090507@xs4all.nl> (raw)
In-Reply-To: <1408381577-31901-3-git-send-email-laurent.pinchart@ideasonboard.com>
On 08/18/2014 05:06 PM, Laurent Pinchart wrote:
> Simplify ioctl handling by using video_ioctl2.
Are you able to test this on actual hardware? And if so, can you run
v4l2-compliance?
Regards,
Hans
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/usb/gadget/function/f_uvc.c | 1 +
> drivers/usb/gadget/function/uvc_v4l2.c | 298 +++++++++++++++++----------------
> 2 files changed, 158 insertions(+), 141 deletions(-)
>
> diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
> index e9d625b..0b86aea 100644
> --- a/drivers/usb/gadget/function/f_uvc.c
> +++ b/drivers/usb/gadget/function/f_uvc.c
> @@ -414,6 +414,7 @@ uvc_register_video(struct uvc_device *uvc)
>
> video->v4l2_dev = &uvc->v4l2_dev;
> video->fops = &uvc_v4l2_fops;
> + video->ioctl_ops = &uvc_v4l2_ioctl_ops;
> video->release = video_device_release;
> strlcpy(video->name, cdev->gadget->name, sizeof(video->name));
>
> diff --git a/drivers/usb/gadget/function/uvc_v4l2.c b/drivers/usb/gadget/function/uvc_v4l2.c
> index f22b878..14c3a37 100644
> --- a/drivers/usb/gadget/function/uvc_v4l2.c
> +++ b/drivers/usb/gadget/function/uvc_v4l2.c
> @@ -48,7 +48,7 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)
> }
>
> /* --------------------------------------------------------------------------
> - * V4L2
> + * V4L2 ioctls
> */
>
> struct uvc_format
> @@ -63,8 +63,29 @@ static struct uvc_format uvc_formats[] = {
> };
>
> static int
> -uvc_v4l2_get_format(struct uvc_video *video, struct v4l2_format *fmt)
> +uvc_v4l2_querycap(struct file *file, void *fh, struct v4l2_capability *cap)
> +{
> + struct video_device *vdev = video_devdata(file);
> + struct uvc_device *uvc = video_get_drvdata(vdev);
> + struct usb_composite_dev *cdev = uvc->func.config->cdev;
> +
> + strlcpy(cap->driver, "g_uvc", sizeof(cap->driver));
> + strlcpy(cap->card, cdev->gadget->name, sizeof(cap->card));
> + strlcpy(cap->bus_info, dev_name(&cdev->gadget->dev),
> + sizeof(cap->bus_info));
> +
> + cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
> +
> + return 0;
> +}
> +
> +static int
> +uvc_v4l2_get_format(struct file *file, void *fh, struct v4l2_format *fmt)
> {
> + struct video_device *vdev = video_devdata(file);
> + struct uvc_device *uvc = video_get_drvdata(vdev);
> + struct uvc_video *video = &uvc->video;
> +
> fmt->fmt.pix.pixelformat = video->fcc;
> fmt->fmt.pix.width = video->width;
> fmt->fmt.pix.height = video->height;
> @@ -78,8 +99,11 @@ uvc_v4l2_get_format(struct uvc_video *video, struct v4l2_format *fmt)
> }
>
> static int
> -uvc_v4l2_set_format(struct uvc_video *video, struct v4l2_format *fmt)
> +uvc_v4l2_set_format(struct file *file, void *fh, struct v4l2_format *fmt)
> {
> + struct video_device *vdev = video_devdata(file);
> + struct uvc_device *uvc = video_get_drvdata(vdev);
> + struct uvc_video *video = &uvc->video;
> struct uvc_format *format;
> unsigned int imagesize;
> unsigned int bpl;
> @@ -116,192 +140,184 @@ uvc_v4l2_set_format(struct uvc_video *video, struct v4l2_format *fmt)
> }
>
> static int
> -uvc_v4l2_open(struct file *file)
> +uvc_v4l2_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *b)
> {
> struct video_device *vdev = video_devdata(file);
> struct uvc_device *uvc = video_get_drvdata(vdev);
> - struct uvc_file_handle *handle;
> -
> - handle = kzalloc(sizeof(*handle), GFP_KERNEL);
> - if (handle == NULL)
> - return -ENOMEM;
> -
> - v4l2_fh_init(&handle->vfh, vdev);
> - v4l2_fh_add(&handle->vfh);
> + struct uvc_video *video = &uvc->video;
>
> - handle->device = &uvc->video;
> - file->private_data = &handle->vfh;
> + if (b->type != video->queue.queue.type)
> + return -EINVAL;
>
> - uvc_function_connect(uvc);
> - return 0;
> + return uvc_alloc_buffers(&video->queue, b);
> }
>
> static int
> -uvc_v4l2_release(struct file *file)
> +uvc_v4l2_querybuf(struct file *file, void *fh, struct v4l2_buffer *b)
> {
> struct video_device *vdev = video_devdata(file);
> struct uvc_device *uvc = video_get_drvdata(vdev);
> - struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data);
> - struct uvc_video *video = handle->device;
> -
> - uvc_function_disconnect(uvc);
> -
> - uvc_video_enable(video, 0);
> - uvc_free_buffers(&video->queue);
> -
> - file->private_data = NULL;
> - v4l2_fh_del(&handle->vfh);
> - v4l2_fh_exit(&handle->vfh);
> - kfree(handle);
> + struct uvc_video *video = &uvc->video;
>
> - return 0;
> + return uvc_query_buffer(&video->queue, b);
> }
>
> -static long
> -uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
> +static int
> +uvc_v4l2_qbuf(struct file *file, void *fh, struct v4l2_buffer *b)
> {
> struct video_device *vdev = video_devdata(file);
> struct uvc_device *uvc = video_get_drvdata(vdev);
> - struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data);
> - struct usb_composite_dev *cdev = uvc->func.config->cdev;
> struct uvc_video *video = &uvc->video;
> - int ret = 0;
> -
> - switch (cmd) {
> - /* Query capabilities */
> - case VIDIOC_QUERYCAP:
> - {
> - struct v4l2_capability *cap = arg;
> -
> - memset(cap, 0, sizeof *cap);
> - strlcpy(cap->driver, "g_uvc", sizeof(cap->driver));
> - strlcpy(cap->card, cdev->gadget->name, sizeof(cap->card));
> - strlcpy(cap->bus_info, dev_name(&cdev->gadget->dev),
> - sizeof cap->bus_info);
> - cap->version = LINUX_VERSION_CODE;
> - cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
> - break;
> - }
> -
> - /* Get & Set format */
> - case VIDIOC_G_FMT:
> - {
> - struct v4l2_format *fmt = arg;
> + int ret;
>
> - if (fmt->type != video->queue.queue.type)
> - return -EINVAL;
> -
> - return uvc_v4l2_get_format(video, fmt);
> - }
> + ret = uvc_queue_buffer(&video->queue, b);
> + if (ret < 0)
> + return ret;
>
> - case VIDIOC_S_FMT:
> - {
> - struct v4l2_format *fmt = arg;
> + return uvc_video_pump(video);
> +}
>
> - if (fmt->type != video->queue.queue.type)
> - return -EINVAL;
> +static int
> +uvc_v4l2_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b)
> +{
> + struct video_device *vdev = video_devdata(file);
> + struct uvc_device *uvc = video_get_drvdata(vdev);
> + struct uvc_video *video = &uvc->video;
>
> - return uvc_v4l2_set_format(video, fmt);
> - }
> + return uvc_dequeue_buffer(&video->queue, b, file->f_flags & O_NONBLOCK);
> +}
>
> - /* Buffers & streaming */
> - case VIDIOC_REQBUFS:
> - {
> - struct v4l2_requestbuffers *rb = arg;
> +static int
> +uvc_v4l2_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
> +{
> + struct video_device *vdev = video_devdata(file);
> + struct uvc_device *uvc = video_get_drvdata(vdev);
> + struct uvc_video *video = &uvc->video;
> + int ret;
>
> - if (rb->type != video->queue.queue.type)
> - return -EINVAL;
> + if (type != video->queue.queue.type)
> + return -EINVAL;
>
> - ret = uvc_alloc_buffers(&video->queue, rb);
> - if (ret < 0)
> - return ret;
> + /* Enable UVC video. */
> + ret = uvc_video_enable(video, 1);
> + if (ret < 0)
> + return ret;
>
> - ret = 0;
> - break;
> - }
> + /*
> + * Complete the alternate setting selection setup phase now that
> + * userspace is ready to provide video frames.
> + */
> + uvc_function_setup_continue(uvc);
> + uvc->state = UVC_STATE_STREAMING;
>
> - case VIDIOC_QUERYBUF:
> - {
> - struct v4l2_buffer *buf = arg;
> + return 0;
> +}
>
> - return uvc_query_buffer(&video->queue, buf);
> - }
> +static int
> +uvc_v4l2_streamoff(struct file *file, void *fh, enum v4l2_buf_type type)
> +{
> + struct video_device *vdev = video_devdata(file);
> + struct uvc_device *uvc = video_get_drvdata(vdev);
> + struct uvc_video *video = &uvc->video;
>
> - case VIDIOC_QBUF:
> - if ((ret = uvc_queue_buffer(&video->queue, arg)) < 0)
> - return ret;
> + if (type != video->queue.queue.type)
> + return -EINVAL;
>
> - return uvc_video_pump(video);
> + return uvc_video_enable(video, 0);
> +}
>
> - case VIDIOC_DQBUF:
> - return uvc_dequeue_buffer(&video->queue, arg,
> - file->f_flags & O_NONBLOCK);
> +static int
> +uvc_v4l2_subscribe_event(struct v4l2_fh *fh,
> + const struct v4l2_event_subscription *sub)
> +{
> + if (sub->type < UVC_EVENT_FIRST || sub->type > UVC_EVENT_LAST)
> + return -EINVAL;
>
> - case VIDIOC_STREAMON:
> - {
> - int *type = arg;
> + return v4l2_event_subscribe(fh, sub, 2, NULL);
> +}
>
> - if (*type != video->queue.queue.type)
> - return -EINVAL;
> +static int
> +uvc_v4l2_unsubscribe_event(struct v4l2_fh *fh,
> + const struct v4l2_event_subscription *sub)
> +{
> + return v4l2_event_unsubscribe(fh, sub);
> +}
>
> - /* Enable UVC video. */
> - ret = uvc_video_enable(video, 1);
> - if (ret < 0)
> - return ret;
> +static long
> +uvc_v4l2_ioctl_default(struct file *file, void *fh, bool valid_prio,
> + unsigned int cmd, void *arg)
> +{
> + struct video_device *vdev = video_devdata(file);
> + struct uvc_device *uvc = video_get_drvdata(vdev);
>
> - /*
> - * Complete the alternate setting selection setup phase now that
> - * userspace is ready to provide video frames.
> - */
> - uvc_function_setup_continue(uvc);
> - uvc->state = UVC_STATE_STREAMING;
> + switch (cmd) {
> + case UVCIOC_SEND_RESPONSE:
> + return uvc_send_response(uvc, arg);
>
> - return 0;
> + default:
> + return -ENOIOCTLCMD;
> }
> +}
>
> - case VIDIOC_STREAMOFF:
> - {
> - int *type = arg;
> +static const struct v4l2_ioctl_ops uvc_v4l2_ioctl_ops = {
> + .vidioc_querycap = uvc_v4l2_querycap,
> + .vidioc_g_fmt_vid_out = uvc_v4l2_get_format,
> + .vidioc_s_fmt_vid_out = uvc_v4l2_set_format,
> + .vidioc_reqbufs = uvc_v4l2_reqbufs,
> + .vidioc_querybuf = uvc_v4l2_querybuf,
> + .vidioc_qbuf = uvc_v4l2_qbuf,
> + .vidioc_dqbuf = uvc_v4l2_dqbuf,
> + .vidioc_streamon = uvc_v4l2_streamon,
> + .vidioc_streamoff = uvc_v4l2_streamoff,
> + .vidioc_subscribe_event = uvc_v4l2_subscribe_event,
> + .vidioc_unsubscribe_event = uvc_v4l2_unsubscribe_event,
> + .vidioc_default = uvc_v4l2_ioctl_default,
> +};
>
> - if (*type != video->queue.queue.type)
> - return -EINVAL;
> +/* --------------------------------------------------------------------------
> + * V4L2
> + */
>
> - return uvc_video_enable(video, 0);
> - }
> +static int
> +uvc_v4l2_open(struct file *file)
> +{
> + struct video_device *vdev = video_devdata(file);
> + struct uvc_device *uvc = video_get_drvdata(vdev);
> + struct uvc_file_handle *handle;
>
> - /* Events */
> - case VIDIOC_DQEVENT:
> - return v4l2_event_dequeue(&handle->vfh, arg,
> - file->f_flags & O_NONBLOCK);
> + handle = kzalloc(sizeof(*handle), GFP_KERNEL);
> + if (handle == NULL)
> + return -ENOMEM;
>
> - case VIDIOC_SUBSCRIBE_EVENT:
> - {
> - struct v4l2_event_subscription *sub = arg;
> + v4l2_fh_init(&handle->vfh, vdev);
> + v4l2_fh_add(&handle->vfh);
>
> - if (sub->type < UVC_EVENT_FIRST || sub->type > UVC_EVENT_LAST)
> - return -EINVAL;
> + handle->device = &uvc->video;
> + file->private_data = &handle->vfh;
>
> - return v4l2_event_subscribe(&handle->vfh, arg, 2, NULL);
> - }
> + uvc_function_connect(uvc);
> + return 0;
> +}
>
> - case VIDIOC_UNSUBSCRIBE_EVENT:
> - return v4l2_event_unsubscribe(&handle->vfh, arg);
> +static int
> +uvc_v4l2_release(struct file *file)
> +{
> + struct video_device *vdev = video_devdata(file);
> + struct uvc_device *uvc = video_get_drvdata(vdev);
> + struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data);
> + struct uvc_video *video = handle->device;
>
> - case UVCIOC_SEND_RESPONSE:
> - ret = uvc_send_response(uvc, arg);
> - break;
> + uvc_function_disconnect(uvc);
>
> - default:
> - return -ENOIOCTLCMD;
> - }
> + uvc_video_enable(video, 0);
> + uvc_free_buffers(&video->queue);
>
> - return ret;
> -}
> + file->private_data = NULL;
> + v4l2_fh_del(&handle->vfh);
> + v4l2_fh_exit(&handle->vfh);
> + kfree(handle);
>
> -static long
> -uvc_v4l2_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
> -{
> - return video_usercopy(file, cmd, arg, uvc_v4l2_do_ioctl);
> + return 0;
> }
>
> static int
> @@ -338,7 +354,7 @@ static struct v4l2_file_operations uvc_v4l2_fops = {
> .owner = THIS_MODULE,
> .open = uvc_v4l2_open,
> .release = uvc_v4l2_release,
> - .ioctl = uvc_v4l2_ioctl,
> + .ioctl = video_ioctl2,
> .mmap = uvc_v4l2_mmap,
> .poll = uvc_v4l2_poll,
> #ifndef CONFIG_MMU
>
next prev parent reply other threads:[~2014-08-18 18:25 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-18 17:06 [PATCH 0/2] Move UVC gagdet to video_ioctl2 Laurent Pinchart
2014-08-18 17:06 ` [PATCH 1/2] usb: gadget: f_uvc: Store EP0 control request state during setup stage Laurent Pinchart
2014-08-18 17:06 ` [PATCH 2/2] usb: gadget: f_uvc: Move to video_ioctl2 Laurent Pinchart
2014-08-18 18:24 ` Hans Verkuil [this message]
2014-08-18 21:16 ` Laurent Pinchart
2014-08-20 7:55 ` Michael Grzeschik
2014-08-20 17:04 ` Laurent Pinchart
2014-08-27 15:16 ` [PATCH] usb: gadget: f_uvc fix transition " Andrzej Pietrasiewicz
2014-08-28 11:28 ` Laurent Pinchart
2014-08-28 14:39 ` Andrzej Pietrasiewicz
2014-08-28 14:48 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53F244DA.3090507@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=andrzej.p@samsung.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mgr@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).