Re: [PATCH 3/4 v4] support for DVBSky dvb-s2 usb: add dvb-usb-v2driver for DVBSky dvb-s2 box, no ci support.

[Antti Palosaari <crope@iki.fi>]

Moikka Max,
I have asked Mauro many times to handle these waiting patches, lastly 
yesterday. Mauro's ETA is tomorrow, Monday. If it does not happen 
tomorrow, I will pick those and send PULL request as those PULL request 
generally go higher priority than patches in patchwork :)

There is also some other patches, mainly from Olli, which I am not going 
to pull my tree before Mauro commits my pending PULL requests.

regards
Antti


On 09/21/2014 04:51 PM, Nibble Max wrote:
> Hello Antti,
>
> Could you collect the following patches?
> It will make to support DVBSky DVB-S2 usb device.
>
> https://patchwork.linuxtv.org/patch/25313/
> https://patchwork.linuxtv.org/patch/25202/
> https://patchwork.linuxtv.org/patch/25201/
>
> BR,
> Max
>> Looks OK
>> Reviewed-by: Antti Palosaari <crope@iki.fi>
>>
>> regards
>> Antti
>>
>> On 08/11/2014 07:45 AM, nibble.max wrote:
>>> remove ci support part in v1 patch.
>>> hook demod read status and set voltage operations.
>>> add m88ts2022 select in Kconfig.
>>>
>>> move usb buffer into state for usb ctrl.
>>> make checkpatch.pl happy.
>>>
>>> Signed-off-by: Nibble Max <nibble.max@gmail.com>
>>> ---
>>>    drivers/media/usb/dvb-usb-v2/Kconfig  |   7 +
>>>    drivers/media/usb/dvb-usb-v2/Makefile |   3 +
>>>    drivers/media/usb/dvb-usb-v2/dvbsky.c | 460 ++++++++++++++++++++++++++++++++++
>>>    3 files changed, 470 insertions(+)
>>>
>>> diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig
>>> index 66645b0..5b34323 100644
>>> --- a/drivers/media/usb/dvb-usb-v2/Kconfig
>>> +++ b/drivers/media/usb/dvb-usb-v2/Kconfig
>>> @@ -141,3 +141,10 @@ config DVB_USB_RTL28XXU
>>>    	help
>>>    	  Say Y here to support the Realtek RTL28xxU DVB USB receiver.
>>>
>>> +config DVB_USB_DVBSKY
>>> +	tristate "DVBSky USB support"
>>> +	depends on DVB_USB_V2
>>> +	select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
>>> +	select MEDIA_TUNER_M88TS2022 if MEDIA_SUBDRV_AUTOSELECT
>>> +	help
>>> +	  Say Y here to support the USB receivers from DVBSky.
>>> diff --git a/drivers/media/usb/dvb-usb-v2/Makefile b/drivers/media/usb/dvb-usb-v2/Makefile
>>> index bc38f03..f10d4df 100644
>>> --- a/drivers/media/usb/dvb-usb-v2/Makefile
>>> +++ b/drivers/media/usb/dvb-usb-v2/Makefile
>>> @@ -37,6 +37,9 @@ obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o
>>>    dvb-usb-rtl28xxu-objs := rtl28xxu.o
>>>    obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o
>>>
>>> +dvb-usb-dvbsky-objs := dvbsky.o
>>> +obj-$(CONFIG_DVB_USB_DVBSKY) += dvb-usb-dvbsky.o
>>> +
>>>    ccflags-y += -I$(srctree)/drivers/media/dvb-core
>>>    ccflags-y += -I$(srctree)/drivers/media/dvb-frontends
>>>    ccflags-y += -I$(srctree)/drivers/media/tuners
>>> diff --git a/drivers/media/usb/dvb-usb-v2/dvbsky.c b/drivers/media/usb/dvb-usb-v2/dvbsky.c
>>> new file mode 100644
>>> index 0000000..34688c8
>>> --- /dev/null
>>> +++ b/drivers/media/usb/dvb-usb-v2/dvbsky.c
>>> @@ -0,0 +1,460 @@
>>> +/*
>>> + * Driver for DVBSky USB2.0 receiver
>>> + *
>>> + * Copyright (C) 2013 Max nibble <nibble.max@gmail.com>
>>> + *
>>> + *    This program is free software; you can redistribute it and/or modify
>>> + *    it under the terms of the GNU General Public License as published by
>>> + *    the Free Software Foundation; either version 2 of the License, or
>>> + *    (at your option) any later version.
>>> + *
>>> + *    This program is distributed in the hope that it will be useful,
>>> + *    but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>> + *    GNU General Public License for more details.
>>> + *
>>> + *    You should have received a copy of the GNU General Public License
>>> + *    along with this program; if not, write to the Free Software
>>> + *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>>> + */
>>> +
>>> +#include "dvb_usb.h"
>>> +#include "m88ds3103.h"
>>> +#include "m88ts2022.h"
>>> +
>>> +#define DVBSKY_MSG_DELAY	0/*2000*/
>>> +#define DVBSKY_BUF_LEN	64
>>> +
>>> +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
>>> +
>>> +struct dvbsky_state {
>>> +	struct mutex stream_mutex;
>>> +	u8 ibuf[DVBSKY_BUF_LEN];
>>> +	u8 obuf[DVBSKY_BUF_LEN];
>>> +	u8 last_lock;
>>> +	struct i2c_client *i2c_client_tuner;
>>> +
>>> +	/* fe hook functions*/
>>> +	int (*fe_set_voltage)(struct dvb_frontend *fe,
>>> +		fe_sec_voltage_t voltage);
>>> +	int (*fe_read_status)(struct dvb_frontend *fe,
>>> +		fe_status_t *status);
>>> +};
>>> +
>>> +static int dvbsky_usb_generic_rw(struct dvb_usb_device *d,
>>> +		u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
>>> +{
>>> +	int ret;
>>> +	struct dvbsky_state *state = d_to_priv(d);
>>> +
>>> +	mutex_lock(&d->usb_mutex);
>>> +	if (wlen != 0)
>>> +		memcpy(state->obuf, wbuf, wlen);
>>> +
>>> +	ret = dvb_usbv2_generic_rw_locked(d, state->obuf, wlen,
>>> +			state->ibuf, rlen);
>>> +
>>> +	if (!ret && (rlen != 0))
>>> +		memcpy(rbuf, state->ibuf, rlen);
>>> +
>>> +	mutex_unlock(&d->usb_mutex);
>>> +	return ret;
>>> +}
>>> +
>>> +static int dvbsky_stream_ctrl(struct dvb_usb_device *d, u8 onoff)
>>> +{
>>> +	struct dvbsky_state *state = d_to_priv(d);
>>> +	int ret;
>>> +	u8 obuf_pre[3] = { 0x37, 0, 0 };
>>> +	u8 obuf_post[3] = { 0x36, 3, 0 };
>>> +
>>> +	mutex_lock(&state->stream_mutex);
>>> +	ret = dvbsky_usb_generic_rw(d, obuf_pre, 3, NULL, 0);
>>> +	if (!ret && onoff) {
>>> +		msleep(20);
>>> +		ret = dvbsky_usb_generic_rw(d, obuf_post, 3, NULL, 0);
>>> +	}
>>> +	mutex_unlock(&state->stream_mutex);
>>> +	return ret;
>>> +}
>>> +
>>> +static int dvbsky_streaming_ctrl(struct dvb_frontend *fe, int onoff)
>>> +{
>>> +	struct dvb_usb_device *d = fe_to_d(fe);
>>> +
>>> +	return dvbsky_stream_ctrl(d, (onoff == 0) ? 0 : 1);
>>> +}
>>> +
>>> +/* GPIO */
>>> +static int dvbsky_gpio_ctrl(struct dvb_usb_device *d, u8 gport, u8 value)
>>> +{
>>> +	int ret;
>>> +	u8 obuf[3], ibuf[2];
>>> +
>>> +	obuf[0] = 0x0e;
>>> +	obuf[1] = gport;
>>> +	obuf[2] = value;
>>> +	ret = dvbsky_usb_generic_rw(d, obuf, 3, ibuf, 1);
>>> +	if (ret)
>>> +		dev_err(&d->udev->dev, "%s: %s() failed=%d\n",
>>> +			KBUILD_MODNAME, __func__, ret);
>>> +	return ret;
>>> +}
>>> +
>>> +/* I2C */
>>> +static int dvbsky_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
>>> +	int num)
>>> +{
>>> +	struct dvb_usb_device *d = i2c_get_adapdata(adap);
>>> +	int ret = 0;
>>> +	u8 ibuf[64], obuf[64];
>>> +
>>> +	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
>>> +		return -EAGAIN;
>>> +
>>> +	if (num > 2) {
>>> +		dev_err(&d->udev->dev,
>>> +		"dvbsky_usb: too many i2c messages[%d] than 2.", num);
>>> +		ret = -EOPNOTSUPP;
>>> +		goto i2c_error;
>>> +	}
>>> +
>>> +	if (num == 1) {
>>> +		if (msg[0].len > 60) {
>>> +			dev_err(&d->udev->dev,
>>> +			"dvbsky_usb: too many i2c bytes[%d] than 60.",
>>> +			msg[0].len);
>>> +			ret = -EOPNOTSUPP;
>>> +			goto i2c_error;
>>> +		}
>>> +		if (msg[0].flags & I2C_M_RD) {
>>> +			/* single read */
>>> +			obuf[0] = 0x09;
>>> +			obuf[1] = 0;
>>> +			obuf[2] = msg[0].len;
>>> +			obuf[3] = msg[0].addr;
>>> +			ret = dvbsky_usb_generic_rw(d, obuf, 4,
>>> +					ibuf, msg[0].len + 1);
>>> +			if (ret)
>>> +				dev_err(&d->udev->dev, "%s: %s() failed=%d\n",
>>> +					KBUILD_MODNAME, __func__, ret);
>>> +			if (!ret)
>>> +				memcpy(msg[0].buf, &ibuf[1], msg[0].len);
>>> +		} else {
>>> +			/* write */
>>> +			obuf[0] = 0x08;
>>> +			obuf[1] = msg[0].addr;
>>> +			obuf[2] = msg[0].len;
>>> +			memcpy(&obuf[3], msg[0].buf, msg[0].len);
>>> +			ret = dvbsky_usb_generic_rw(d, obuf,
>>> +					msg[0].len + 3, ibuf, 1);
>>> +			if (ret)
>>> +				dev_err(&d->udev->dev, "%s: %s() failed=%d\n",
>>> +					KBUILD_MODNAME, __func__, ret);
>>> +		}
>>> +	} else {
>>> +		if ((msg[0].len > 60) || (msg[1].len > 60)) {
>>> +			dev_err(&d->udev->dev,
>>> +			"dvbsky_usb: too many i2c bytes[w-%d][r-%d] than 60.",
>>> +			msg[0].len, msg[1].len);
>>> +			ret = -EOPNOTSUPP;
>>> +			goto i2c_error;
>>> +		}
>>> +		/* write then read */
>>> +		obuf[0] = 0x09;
>>> +		obuf[1] = msg[0].len;
>>> +		obuf[2] = msg[1].len;
>>> +		obuf[3] = msg[0].addr;
>>> +		memcpy(&obuf[4], msg[0].buf, msg[0].len);
>>> +		ret = dvbsky_usb_generic_rw(d, obuf,
>>> +			msg[0].len + 4, ibuf, msg[1].len + 1);
>>> +		if (ret)
>>> +			dev_err(&d->udev->dev, "%s: %s() failed=%d\n",
>>> +				KBUILD_MODNAME, __func__, ret);
>>> +
>>> +		if (!ret)
>>> +			memcpy(msg[1].buf, &ibuf[1], msg[1].len);
>>> +	}
>>> +i2c_error:
>>> +	mutex_unlock(&d->i2c_mutex);
>>> +	return (ret) ? ret : num;
>>> +}
>>> +
>>> +static u32 dvbsky_i2c_func(struct i2c_adapter *adapter)
>>> +{
>>> +	return I2C_FUNC_I2C;
>>> +}
>>> +
>>> +static struct i2c_algorithm dvbsky_i2c_algo = {
>>> +	.master_xfer   = dvbsky_i2c_xfer,
>>> +	.functionality = dvbsky_i2c_func,
>>> +};
>>> +
>>> +#if IS_ENABLED(CONFIG_RC_CORE)
>>> +static int dvbsky_rc_query(struct dvb_usb_device *d)
>>> +{
>>> +	u32 code = 0xffff, scancode;
>>> +	u8 rc5_command, rc5_system;
>>> +	u8 obuf[2], ibuf[2], toggle;
>>> +	int ret;
>>> +
>>> +	obuf[0] = 0x10;
>>> +	ret = dvbsky_usb_generic_rw(d, obuf, 1, ibuf, 2);
>>> +	if (ret)
>>> +		dev_err(&d->udev->dev, "%s: %s() failed=%d\n",
>>> +			KBUILD_MODNAME, __func__, ret);
>>> +	if (ret == 0)
>>> +		code = (ibuf[0] << 8) | ibuf[1];
>>> +	if (code != 0xffff) {
>>> +		dev_dbg(&d->udev->dev, "rc code: %x\n", code);
>>> +		rc5_command = code & 0x3F;
>>> +		rc5_system = (code & 0x7C0) >> 6;
>>> +		toggle = (code & 0x800) ? 1 : 0;
>>> +		scancode = rc5_system << 8 | rc5_command;
>>> +		rc_keydown(d->rc_dev, RC_TYPE_RC5, scancode, toggle);
>>> +	}
>>> +	return 0;
>>> +}
>>> +
>>> +static int dvbsky_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
>>> +{
>>> +	rc->allowed_protos = RC_BIT_RC5;
>>> +	rc->query          = dvbsky_rc_query;
>>> +	rc->interval       = 300;
>>> +	return 0;
>>> +}
>>> +#else
>>> +	#define dvbsky_get_rc_config NULL
>>> +#endif
>>> +
>>> +static int dvbsky_usb_set_voltage(struct dvb_frontend *fe,
>>> +	fe_sec_voltage_t voltage)
>>> +{
>>> +	struct dvb_usb_device *d = fe_to_d(fe);
>>> +	struct dvbsky_state *state = d_to_priv(d);
>>> +	u8 value;
>>> +
>>> +	if (voltage == SEC_VOLTAGE_OFF)
>>> +		value = 0;
>>> +	else
>>> +		value = 1;
>>> +	dvbsky_gpio_ctrl(d, 0x80, value);
>>> +
>>> +	return state->fe_set_voltage(fe, voltage);
>>> +}
>>> +
>>> +static int dvbsky_read_mac_addr(struct dvb_usb_adapter *adap, u8 mac[6])
>>> +{
>>> +	struct dvb_usb_device *d = adap_to_d(adap);
>>> +	u8 obuf[] = { 0x1e, 0x00 };
>>> +	u8 ibuf[6] = { 0 };
>>> +	struct i2c_msg msg[] = {
>>> +		{
>>> +			.addr = 0x51,
>>> +			.flags = 0,
>>> +			.buf = obuf,
>>> +			.len = 2,
>>> +		}, {
>>> +			.addr = 0x51,
>>> +			.flags = I2C_M_RD,
>>> +			.buf = ibuf,
>>> +			.len = 6,
>>> +		}
>>> +	};
>>> +
>>> +	if (i2c_transfer(&d->i2c_adap, msg, 2) == 2)
>>> +		memcpy(mac, ibuf, 6);
>>> +
>>> +	dev_info(&d->udev->dev, "dvbsky_usb MAC address=%pM\n", mac);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int dvbsky_usb_read_status(struct dvb_frontend *fe, fe_status_t *status)
>>> +{
>>> +	struct dvb_usb_device *d = fe_to_d(fe);
>>> +	struct dvbsky_state *state = d_to_priv(d);
>>> +	int ret;
>>> +
>>> +	ret = state->fe_read_status(fe, status);
>>> +
>>> +	/* it need resync slave fifo when signal change from unlock to lock.*/
>>> +	if ((*status & FE_HAS_LOCK) && (!state->last_lock))
>>> +		dvbsky_stream_ctrl(d, 1);
>>> +
>>> +	state->last_lock = (*status & FE_HAS_LOCK) ? 1 : 0;
>>> +	return ret;
>>> +}
>>> +
>>> +static const struct m88ds3103_config dvbsky_s960_m88ds3103_config = {
>>> +	.i2c_addr = 0x68,
>>> +	.clock = 27000000,
>>> +	.i2c_wr_max = 33,
>>> +	.clock_out = 0,
>>> +	.ts_mode = M88DS3103_TS_CI,
>>> +	.ts_clk = 16000,
>>> +	.ts_clk_pol = 0,
>>> +	.agc = 0x99,
>>> +	.lnb_hv_pol = 1,
>>> +	.lnb_en_pol = 1,
>>> +};
>>> +
>>> +static int dvbsky_s960_attach(struct dvb_usb_adapter *adap)
>>> +{
>>> +	struct dvbsky_state *state = adap_to_priv(adap);
>>> +	struct dvb_usb_device *d = adap_to_d(adap);
>>> +	int ret = 0;
>>> +	/* demod I2C adapter */
>>> +	struct i2c_adapter *i2c_adapter;
>>> +	struct i2c_client *client;
>>> +	struct i2c_board_info info;
>>> +	struct m88ts2022_config m88ts2022_config = {
>>> +			.clock = 27000000,
>>> +		};
>>> +	memset(&info, 0, sizeof(struct i2c_board_info));
>>> +
>>> +	/* attach demod */
>>> +	adap->fe[0] = dvb_attach(m88ds3103_attach,
>>> +			&dvbsky_s960_m88ds3103_config,
>>> +			&d->i2c_adap,
>>> +			&i2c_adapter);
>>> +	if (!adap->fe[0]) {
>>> +		dev_err(&d->udev->dev, "dvbsky_s960_attach fail.\n");
>>> +		ret = -ENODEV;
>>> +		goto fail_attach;
>>> +	}
>>> +
>>> +	/* attach tuner */
>>> +	m88ts2022_config.fe = adap->fe[0];
>>> +	strlcpy(info.type, "m88ts2022", I2C_NAME_SIZE);
>>> +	info.addr = 0x60;
>>> +	info.platform_data = &m88ts2022_config;
>>> +	request_module("m88ts2022");
>>> +	client = i2c_new_device(i2c_adapter, &info);
>>> +	if (client == NULL || client->dev.driver == NULL) {
>>> +		dvb_frontend_detach(adap->fe[0]);
>>> +		ret = -ENODEV;
>>> +		goto fail_attach;
>>> +	}
>>> +
>>> +	if (!try_module_get(client->dev.driver->owner)) {
>>> +		i2c_unregister_device(client);
>>> +		dvb_frontend_detach(adap->fe[0]);
>>> +		ret = -ENODEV;
>>> +		goto fail_attach;
>>> +	}
>>> +
>>> +	/* delegate signal strength measurement to tuner */
>>> +	adap->fe[0]->ops.read_signal_strength =
>>> +			adap->fe[0]->ops.tuner_ops.get_rf_strength;
>>> +
>>> +	/* hook fe: need to resync the slave fifo when signal locks. */
>>> +	state->fe_read_status = adap->fe[0]->ops.read_status;
>>> +	adap->fe[0]->ops.read_status = dvbsky_usb_read_status;
>>> +
>>> +	/* hook fe: LNB off/on is control by Cypress usb chip. */
>>> +	state->fe_set_voltage = adap->fe[0]->ops.set_voltage;
>>> +	adap->fe[0]->ops.set_voltage = dvbsky_usb_set_voltage;
>>> +
>>> +	state->i2c_client_tuner = client;
>>> +
>>> +fail_attach:
>>> +	return ret;
>>> +}
>>> +
>>> +static int dvbsky_identify_state(struct dvb_usb_device *d, const char **name)
>>> +{
>>> +	dvbsky_gpio_ctrl(d, 0x04, 1);
>>> +	msleep(20);
>>> +	dvbsky_gpio_ctrl(d, 0x83, 0);
>>> +	dvbsky_gpio_ctrl(d, 0xc0, 1);
>>> +	msleep(100);
>>> +	dvbsky_gpio_ctrl(d, 0x83, 1);
>>> +	dvbsky_gpio_ctrl(d, 0xc0, 0);
>>> +	msleep(50);
>>> +
>>> +	return WARM;
>>> +}
>>> +
>>> +static int dvbsky_init(struct dvb_usb_device *d)
>>> +{
>>> +	struct dvbsky_state *state = d_to_priv(d);
>>> +
>>> +	/* use default interface */
>>> +	/*
>>> +	ret = usb_set_interface(d->udev, 0, 0);
>>> +	if (ret)
>>> +		return ret;
>>> +	*/
>>> +	mutex_init(&state->stream_mutex);
>>> +
>>> +	state->last_lock = 0;
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static void dvbsky_exit(struct dvb_usb_device *d)
>>> +{
>>> +	struct dvbsky_state *state = d_to_priv(d);
>>> +	struct i2c_client *client;
>>> +
>>> +	client = state->i2c_client_tuner;
>>> +	/* remove I2C tuner */
>>> +	if (client) {
>>> +		module_put(client->dev.driver->owner);
>>> +		i2c_unregister_device(client);
>>> +	}
>>> +}
>>> +
>>> +/* DVB USB Driver stuff */
>>> +static struct dvb_usb_device_properties dvbsky_s960_props = {
>>> +	.driver_name = KBUILD_MODNAME,
>>> +	.owner = THIS_MODULE,
>>> +	.adapter_nr = adapter_nr,
>>> +	.size_of_priv = sizeof(struct dvbsky_state),
>>> +
>>> +	.generic_bulk_ctrl_endpoint = 0x01,
>>> +	.generic_bulk_ctrl_endpoint_response = 0x81,
>>> +	.generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY,
>>> +
>>> +	.i2c_algo         = &dvbsky_i2c_algo,
>>> +	.frontend_attach  = dvbsky_s960_attach,
>>> +	.init             = dvbsky_init,
>>> +	.get_rc_config    = dvbsky_get_rc_config,
>>> +	.streaming_ctrl   = dvbsky_streaming_ctrl,
>>> +	.identify_state	  = dvbsky_identify_state,
>>> +	.exit             = dvbsky_exit,
>>> +	.read_mac_address = dvbsky_read_mac_addr,
>>> +
>>> +	.num_adapters = 1,
>>> +	.adapter = {
>>> +		{
>>> +			.stream = DVB_USB_STREAM_BULK(0x82, 8, 4096),
>>> +		}
>>> +	}
>>> +};
>>> +
>>> +static const struct usb_device_id dvbsky_id_table[] = {
>>> +	{ DVB_USB_DEVICE(0x0572, 0x6831,
>>> +		&dvbsky_s960_props, "DVBSky S960/S860", RC_MAP_DVBSKY) },
>>> +	{ }
>>> +};
>>> +MODULE_DEVICE_TABLE(usb, dvbsky_id_table);
>>> +
>>> +static struct usb_driver dvbsky_usb_driver = {
>>> +	.name = KBUILD_MODNAME,
>>> +	.id_table = dvbsky_id_table,
>>> +	.probe = dvb_usbv2_probe,
>>> +	.disconnect = dvb_usbv2_disconnect,
>>> +	.suspend = dvb_usbv2_suspend,
>>> +	.resume = dvb_usbv2_resume,
>>> +	.reset_resume = dvb_usbv2_reset_resume,
>>> +	.no_dynamic_id = 1,
>>> +	.soft_unbind = 1,
>>> +};
>>> +
>>> +module_usb_driver(dvbsky_usb_driver);
>>> +
>>> +MODULE_AUTHOR("Max nibble <nibble.max@gmail.com>");
>>> +MODULE_DESCRIPTION("Driver for DVBSky USB");
>>> +MODULE_LICENSE("GPL");
>>>
>>
>> --
>> http://palosaari.fi/
>

-- 
http://palosaari.fi/