From: Antti Palosaari <crope@iki.fi>
To: Matthias Schwarzott <zzam@gentoo.org>,
linux-media@vger.kernel.org, mchehab@osg.samsung.com
Subject: Re: [PATCH V2 13/13] cx231xx: scan all four existing i2c busses instead of the 3 masters
Date: Wed, 01 Oct 2014 22:47:01 +0300 [thread overview]
Message-ID: <542C5A35.1040005@iki.fi> (raw)
In-Reply-To: <1412140821-16285-14-git-send-email-zzam@gentoo.org>
Reviewed-by: Antti Palosaari <crope@iki.fi>
btw. is there some reason you those on that order? I mean you scan I2C_2
between MUX segments?
Antti
On 10/01/2014 08:20 AM, Matthias Schwarzott wrote:
> The scanning itself just fails (as before this series) but now the correct busses are scanned.
>
> V2: Changed to symbolic names where muxed adapters can be seen directly.
>
> Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
> ---
> drivers/media/usb/cx231xx/cx231xx-core.c | 6 ++++++
> drivers/media/usb/cx231xx/cx231xx-i2c.c | 8 ++++----
> 2 files changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c
> index c49022f..60dbbbb 100644
> --- a/drivers/media/usb/cx231xx/cx231xx-core.c
> +++ b/drivers/media/usb/cx231xx/cx231xx-core.c
> @@ -1303,6 +1303,12 @@ int cx231xx_dev_init(struct cx231xx *dev)
> cx231xx_i2c_mux_register(dev, 0);
> cx231xx_i2c_mux_register(dev, 1);
>
> + /* scan the real bus segments */
> + cx231xx_do_i2c_scan(dev, I2C_0);
> + cx231xx_do_i2c_scan(dev, I2C_1_MUX_1);
> + cx231xx_do_i2c_scan(dev, I2C_2);
> + cx231xx_do_i2c_scan(dev, I2C_1_MUX_3);
> +
> /* init hardware */
> /* Note : with out calling set power mode function,
> afe can not be set up correctly */
> diff --git a/drivers/media/usb/cx231xx/cx231xx-i2c.c b/drivers/media/usb/cx231xx/cx231xx-i2c.c
> index bb82e6d..0df50d3 100644
> --- a/drivers/media/usb/cx231xx/cx231xx-i2c.c
> +++ b/drivers/media/usb/cx231xx/cx231xx-i2c.c
> @@ -492,6 +492,9 @@ void cx231xx_do_i2c_scan(struct cx231xx *dev, int i2c_port)
> int i, rc;
> struct i2c_client client;
>
> + if (!i2c_scan)
> + return;
> +
> memset(&client, 0, sizeof(client));
> client.adapter = cx231xx_get_i2c_adap(dev, i2c_port);
>
> @@ -533,10 +536,7 @@ int cx231xx_i2c_register(struct cx231xx_i2c *bus)
> i2c_set_adapdata(&bus->i2c_adap, &dev->v4l2_dev);
> i2c_add_adapter(&bus->i2c_adap);
>
> - if (0 == bus->i2c_rc) {
> - if (i2c_scan)
> - cx231xx_do_i2c_scan(dev, bus->nr);
> - } else
> + if (0 != bus->i2c_rc)
> cx231xx_warn("%s: i2c bus %d register FAILED\n",
> dev->name, bus->nr);
>
>
--
http://palosaari.fi/
next prev parent reply other threads:[~2014-10-01 19:47 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-01 5:20 [PATCH V2 00/13] cx231xx: Use muxed i2c adapters instead of custom switching Matthias Schwarzott
2014-10-01 5:20 ` [PATCH V2 01/13] cx231xx: let i2c bus scanning use its own i2c_client Matthias Schwarzott
2014-10-01 5:20 ` [PATCH V2 02/13] cx231xx: use own i2c_client for eeprom access Matthias Schwarzott
2014-10-01 5:20 ` [PATCH V2 03/13] cx231xx: delete i2c_client per bus Matthias Schwarzott
2014-10-01 5:20 ` [PATCH V2 04/13] cx231xx: give each master i2c bus a seperate name Matthias Schwarzott
2014-10-01 19:22 ` Antti Palosaari
2014-10-02 5:16 ` Matthias Schwarzott
2014-10-01 5:20 ` [PATCH V2 05/13] cx231xx: Modifiy the symbolic constants for i2c ports and describe Matthias Schwarzott
2014-10-01 19:12 ` Antti Palosaari
2014-10-01 5:20 ` [PATCH V2 06/13] cx231xx: Use symbolic constants for i2c ports instead of numbers Matthias Schwarzott
2014-10-01 5:20 ` [PATCH V2 07/13] cx231xx: add wrapper to get the i2c_adapter pointer Matthias Schwarzott
2014-10-01 19:28 ` Antti Palosaari
2014-10-01 5:20 ` [PATCH V2 08/13] cx231xx: remember status of i2c port_3 switch Matthias Schwarzott
2014-10-01 19:36 ` Antti Palosaari
2014-10-01 21:02 ` Matthias Schwarzott
2014-10-01 5:20 ` [PATCH V2 09/13] cx231xx: let is_tuner check the real i2c port and not the i2c master number Matthias Schwarzott
2014-10-01 5:20 ` [PATCH V2 10/13] cx231xx: change usage of I2C_1 to the real i2c port Matthias Schwarzott
2014-10-01 19:40 ` Antti Palosaari
2014-10-01 5:20 ` [PATCH V2 11/13] cx231xx: register i2c mux adapters for master1 and use as I2C_1_MUX_1 and I2C_1_MUX_3 Matthias Schwarzott
2014-10-01 19:43 ` Antti Palosaari
2014-10-01 5:20 ` [PATCH V2 12/13] cx231xx: drop unconditional port3 switching Matthias Schwarzott
2014-10-01 5:20 ` [PATCH V2 13/13] cx231xx: scan all four existing i2c busses instead of the 3 masters Matthias Schwarzott
2014-10-01 19:47 ` Antti Palosaari [this message]
2014-10-02 4:31 ` Matthias Schwarzott
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542C5A35.1040005@iki.fi \
--to=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@osg.samsung.com \
--cc=zzam@gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).