From: Christopher Scheuring <chris@anke-und-chris.de>
To: linux-media@vger.kernel.org
Subject: Fwd: Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel 3.16.0-4)
Date: Wed, 19 Nov 2014 20:55:31 +0100 [thread overview]
Message-ID: <546CF5B3.9040705@anke-und-chris.de> (raw)
In-Reply-To: <546CEF67.9060803@anke-und-chris.de>
resend because of mailing-list rules: text-only mails
-------- Weitergeleitete Nachricht --------
Betreff: Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel
3.16.0-4)
Datum: Wed, 19 Nov 2014 20:28:39 +0100
Von: Christopher Scheuring <chris@anke-und-chris.de>
An: crope@iki.fi
Kopie (CC): linux-media@vger.kernel.org
Hello Antti,
the guys from tech@dvbsky.net told me to contact you because of my
problems with the drivers for my DVBSKY S952.
I attached the whole conversation. Currently the main problem is if i
use the current drivers via
git(http://git.linuxtv.org/cgit.cgi/media_build.git/about/) my single
TT-Budget card works fine. But the signal from the DVDBSky S952 is very
worse: Sync problems, bad SNR, drops on video and audio... If I use the
driver dvbsky.net provides (media_build-bst-14-141106), the signal on
booth tuners is fine - but then my TT-Budget doesn't works anymore (see
end of this mail aka starting the conversation with tech@dvbsky.net).
Do you have any ideas, how I could fix this problem? Before I updated my
system (from Debian Wheezy with Kernel 3.2.0-4-amd64 everything was fine
with both cards.
If you need more detailed information, please let me know, so I could
provide them as soon as possible,
Thanks a lot and best wishes
Chris
-------- Weitergeleitete Nachricht --------
Betreff: Re: Re: Problems with Linux drivers (Debian Jessie kernel
3.16.0-4)
Datum: Wed, 19 Nov 2014 10:28:06 +0800
Von: tech <tech@dvbsky.net>
An: Christopher Scheuring <chris@anke-und-chris.de>
Hello,
Could you report this problem to Antti Palosaari crope@iki.fi
<mailto:crope@iki.fi> and cc to linux-media@vger.kernel.org ?
Antti is the author/maintainer of M88DS3103 driver.
Please list the compare result of the driver from DVBSky site and
Linuxtv.org.
Max from DVBSky also register linux-media mail list.
He will get your report and co-work with Antti to fix this issue of
M88DS3103 driver from Linuxtv.org.
BR,
tech
------------------------------------------------------------------------
*From:* Christopher Scheuring<chris@anke-und-chris.de
<mailto:chris@anke-und-chris.de>>
*Date:* 2014-11-19 04:42:10
*To:* tech<tech@dvbsky.net <mailto:tech@dvbsky.net>>
*Cc:* <>
*Subject:* Re: Problems with Linux drivers (Debian Jessie kernel 3.16.0-4)
Hello,
with the drivers from linuxtv.org and the firmware provided by your
site, both cards work.
But the DVBSky card (Montage M88DS3103) do now have a really bad
SNR!TT-Budget C-1501 works as expected. See the output of femon - the
signal of the DVBSky card was excellent with the drivers from you
site... Any idea, what could cause the problem? TV signal provided by
the DVBSky sometimes drops :-(
xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a1
*using '/dev/dvb/adapter1/frontend0'**
**FE: Montage M88DS3103 (SAT)*
status 1f | signal 585e | *snr 0096* | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 585e | *snr 0096* | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a2
*using '/dev/dvb/adapter2/frontend0'**
**FE: Montage M88DS3103 (SAT)*
status 1f | signal 6c07 | *snr 0096* | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 6c07 | *snr 0096* | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a0
*using '/dev/dvb/adapter0/frontend0'**
**FE: STV090x Multistandard (SAT)*
status 1f | signal a3d6 | *snr bccb* | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal a3d6 | *snr bd2e* | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
Here the dmesg output of the loaded drivers and firmware of the DVBSky Card:
dmesg | egrep "cx23885|i2c|m88ds3103"
c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add DVBSky
T982(Dual DVB-T2/T/C) support
9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x device
name i2c_devs array
c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add DVBSky
T982(Dual DVB-T2/T/C) support
9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x device
name i2c_devs array
c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add DVBSky
T982(Dual DVB-T2/T/C) support
9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x device
name i2c_devs array
[ 16.396426] cx23885 driver version 0.0.4 loaded
[ 16.396558] CORE cx23885[0]: subsystem: 4254:0952, board: DVBSky S952
[card=50,autodetected]
[ 16.838409] cx25840 4-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
[ 16.909538] cx25840 4-0044: firmware: direct-loading firmware
v4l-cx23885-avcore-01.fw
[ 17.518086] cx25840 4-0044: loaded v4l-cx23885-avcore-01.fw firmware
(16382 bytes)
[ 17.533358] cx23885_dvb_register() allocating 1 frontend(s)
[ 17.533362] cx23885[0]: cx23885 based dvb card
[ 17.670143] i2c i2c-3: m88ds3103_attach: chip_id=70
[ 17.672970] i2c i2c-3: Added multiplexed i2c bus 5
[ 17.780353] DVB: registering new adapter (cx23885[0])
[ 17.780357] cx23885 0000:04:00.0: DVB: registering adapter 1 frontend
0 (Montage M88DS3103)...
[ 17.807503] cx23885_dvb_register() allocating 1 frontend(s)
[ 17.807505] cx23885[0]: cx23885 based dvb card
[ 17.807987] i2c i2c-2: m88ds3103_attach: chip_id=70
[ 17.810783] i2c i2c-2: Added multiplexed i2c bus 6
[ 17.866021] DVB: registering new adapter (cx23885[0])
[ 17.866025] cx23885 0000:04:00.0: DVB: registering adapter 2 frontend
0 (Montage M88DS3103)...
[ 17.893182] cx23885_dev_checkrevision() Hardware revision = 0xa5
[ 17.893187] cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 19,
latency: 0, mmio: 0xfda00000
[ 51.512292] i2c i2c-3: m88ds3103: found a 'Montage M88DS3103' in cold
state
[ 51.818948] cx23885 0000:04:00.0: firmware: direct-loading firmware
dvb-demod-m88ds3103.fw
[ 51.818958] i2c i2c-3: m88ds3103: downloading firmware from file
'dvb-demod-m88ds3103.fw'
[ 52.720270] i2c i2c-3: m88ds3103: found a 'Montage M88DS3103' in warm
state
[ 52.720276] i2c i2c-3: m88ds3103: firmware version 3.B
[ 52.734588] i2c i2c-2: m88ds3103: found a 'Montage M88DS3103' in cold
state
[ 52.734618] cx23885 0000:04:00.0: firmware: direct-loading firmware
dvb-demod-m88ds3103.fw
[ 52.734621] i2c i2c-2: m88ds3103: downloading firmware from file
'dvb-demod-m88ds3103.fw'
[ 53.636110] i2c i2c-2: m88ds3103: found a 'Montage M88DS3103' in warm
state
[ 53.636115] i2c i2c-2: m88ds3103: firmware version 3.B
Thanks a lot for your help.
Regards,
Chris
Am 18.11.2014 um 03:27 schrieb tech:
> Hello,
>
> Could you get the media code from linuxtv.org?
> and build this driver and install.
> http://git.linuxtv.org/cgit.cgi/media_build.git/about/
>
> BR,
> tech
> ------------------------------------------------------------------------
> *From:* Christopher Scheuring<chris@anke-und-chris.de
> <mailto:chris@anke-und-chris.de>>
> *Date:* 2014-11-18 06:07:27
> *To:* tech<tech@dvbsky.net <mailto:tech@dvbsky.net>>
> *Cc:* <>
> *Subject:* Problems with Linux drivers (Debian Jessie kernel 3.16.0-4)
> Hi,
>
> I reinstalled after updating my system with the Linux drivers for the
> dvbsky cards provided by your site (media_build-bst-14-141106).
>
> Compiling with the build_x64.sh script was successfully and I could
> install the needed drivers via make install. After that the Conexant
> Systems CX23885 (DVBSKY S952) card works perfectly.
>
> Unfortunately after installing the drivers my Philips Semiconductors
> SAA7146 (TT-Budget C-1501) card doesn't runs anymore - the card worked
> perfectly before installing the provided drivers from your page!
>
> If got following error message in the kernel-log:
> [ 14.916814] budget_core: disagrees about version of symbol
> dvb_dmxdev_init
> [ 14.916819] budget_core: Unknown symbol dvb_dmxdev_init (err -22)
> [ 14.916827] budget_core: disagrees about version of symbol
> saa7146_wait_for_debi_done
> [ 14.916829] budget_core: Unknown symbol saa7146_wait_for_debi_done
> (err -22)
> [ 14.916832] budget_core: disagrees about version of symbol
> saa7146_i2c_adapter_prepare
> [ 14.916833] budget_core: Unknown symbol saa7146_i2c_adapter_prepare
> (err -22)
> [ 14.916840] budget_core: disagrees about version of symbol
> dvb_register_adapter
> [ 14.916841] budget_core: Unknown symbol dvb_register_adapter (err -22)
> [ 14.916846] budget_core: disagrees about version of symbol
> dvb_dmx_swfilter_packets
> [ 14.916848] budget_core: Unknown symbol dvb_dmx_swfilter_packets
> (err -22)
> [ 14.916862] budget_core: disagrees about version of symbol
> dvb_dmx_release
> [ 14.916864] budget_core: Unknown symbol dvb_dmx_release (err -22)
> [ 14.916869] budget_core: disagrees about version of symbol dvb_net_init
> [ 14.916871] budget_core: Unknown symbol dvb_net_init (err -22)
> [ 14.916875] budget_core: disagrees about version of symbol
> dvb_dmxdev_release
> [ 14.916877] budget_core: Unknown symbol dvb_dmxdev_release (err -22)
> [ 14.916890] budget_core: disagrees about version of symbol
> dvb_net_release
> [ 14.916892] budget_core: Unknown symbol dvb_net_release (err -22)
> [ 14.916896] budget_core: disagrees about version of symbol
> saa7146_setgpio
> [ 14.916897] budget_core: Unknown symbol saa7146_setgpio (err -22)
> [ 14.916902] budget_core: disagrees about version of symbol
> dvb_unregister_adapter
> [ 14.916904] budget_core: Unknown symbol dvb_unregister_adapter (err
> -22)
> [ 14.916907] budget_core: disagrees about version of symbol dvb_dmx_init
> [ 14.916908] budget_core: Unknown symbol dvb_dmx_init (err -22)
>
>
>
> I think something went wrong with the provided driver packes or some
> drivers where overwritten, and some necessary not... I couldn't found
> any solution in the internet.
>
> Here my relevant system-infos:
> Linux XXX 3.16.0-4-amd64 #1 SMP Debian 3.16.7-2 (2014-11-06) x86_64
> GNU/Linux
>
> The needed kernel header files 3.16.0-4-amd64 are installed.
>
> lsmod | grep dvb
> rc_dvbsky 12399 0
> dvbsky_m88ds3103 25614 2
> videobuf_dvb 12762 1 cx23885
> videobuf_core 21832 3 videobuf_dma_sg,cx23885,videobuf_dvb
> dvb_core 102010 3 cx23885,altera_ci,videobuf_dvb
> i2c_core 46012 11
> drm,i2c_i801,cx23885,cx25840,dvbsky_m88ds3103,nvidia,v4l2_common,tveeprom,ttpci_eeprom,tda18271,videodev
> rc_core 22404 13
> ir_sharp_decoder,lirc_dev,cx23885,ir_lirc_codec,ir_rc5_decoder,ir_nec_decoder,ir_sony_decoder,rc_dvbsky,ir_mce_kbd_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_sanyo_decoder
>
>
>
> Could you provide me any help for a solution getting the SAA7146
> (TT-Budget C-1501) card working again with the kernel 3.16.0-4? With
> the kernel 3.2.0-4-amd64 (with Debian wheezy) and the drivers
> media_build-bst-13-140526 I didn't had the problems... everything
> worked fine. Downgrading is no solution :-)
>
> Attached the complete dmesg protocol.
>
>
> Thanks a lot!
>
> Regards,
> Chris
>
next parent reply other threads:[~2014-11-19 19:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <201411191028007188819@dvbsky.net>
[not found] ` <546CEF67.9060803@anke-und-chris.de>
2014-11-19 19:55 ` Christopher Scheuring [this message]
2014-11-20 7:01 ` Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel 3.16.0-4) Antti Palosaari
2014-11-20 12:53 ` Christopher Scheuring
2014-11-21 2:30 ` Re: Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel3.16.0-4) Nibble Max
2014-12-16 12:45 ` Christopher Scheuring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=546CF5B3.9040705@anke-und-chris.de \
--to=chris@anke-und-chris.de \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).