* Fwd: Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel 3.16.0-4) [not found] ` <546CEF67.9060803@anke-und-chris.de> @ 2014-11-19 19:55 ` Christopher Scheuring 2014-11-20 7:01 ` Antti Palosaari 1 sibling, 0 replies; 5+ messages in thread From: Christopher Scheuring @ 2014-11-19 19:55 UTC (permalink / raw) To: linux-media resend because of mailing-list rules: text-only mails -------- Weitergeleitete Nachricht -------- Betreff: Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel 3.16.0-4) Datum: Wed, 19 Nov 2014 20:28:39 +0100 Von: Christopher Scheuring <chris@anke-und-chris.de> An: crope@iki.fi Kopie (CC): linux-media@vger.kernel.org Hello Antti, the guys from tech@dvbsky.net told me to contact you because of my problems with the drivers for my DVBSKY S952. I attached the whole conversation. Currently the main problem is if i use the current drivers via git(http://git.linuxtv.org/cgit.cgi/media_build.git/about/) my single TT-Budget card works fine. But the signal from the DVDBSky S952 is very worse: Sync problems, bad SNR, drops on video and audio... If I use the driver dvbsky.net provides (media_build-bst-14-141106), the signal on booth tuners is fine - but then my TT-Budget doesn't works anymore (see end of this mail aka starting the conversation with tech@dvbsky.net). Do you have any ideas, how I could fix this problem? Before I updated my system (from Debian Wheezy with Kernel 3.2.0-4-amd64 everything was fine with both cards. If you need more detailed information, please let me know, so I could provide them as soon as possible, Thanks a lot and best wishes Chris -------- Weitergeleitete Nachricht -------- Betreff: Re: Re: Problems with Linux drivers (Debian Jessie kernel 3.16.0-4) Datum: Wed, 19 Nov 2014 10:28:06 +0800 Von: tech <tech@dvbsky.net> An: Christopher Scheuring <chris@anke-und-chris.de> Hello, Could you report this problem to Antti Palosaari crope@iki.fi <mailto:crope@iki.fi> and cc to linux-media@vger.kernel.org ? Antti is the author/maintainer of M88DS3103 driver. Please list the compare result of the driver from DVBSky site and Linuxtv.org. Max from DVBSky also register linux-media mail list. He will get your report and co-work with Antti to fix this issue of M88DS3103 driver from Linuxtv.org. BR, tech ------------------------------------------------------------------------ *From:* Christopher Scheuring<chris@anke-und-chris.de <mailto:chris@anke-und-chris.de>> *Date:* 2014-11-19 04:42:10 *To:* tech<tech@dvbsky.net <mailto:tech@dvbsky.net>> *Cc:* <> *Subject:* Re: Problems with Linux drivers (Debian Jessie kernel 3.16.0-4) Hello, with the drivers from linuxtv.org and the firmware provided by your site, both cards work. But the DVBSky card (Montage M88DS3103) do now have a really bad SNR!TT-Budget C-1501 works as expected. See the output of femon - the signal of the DVBSky card was excellent with the drivers from you site... Any idea, what could cause the problem? TV signal provided by the DVBSky sometimes drops :-( xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a1 *using '/dev/dvb/adapter1/frontend0'** **FE: Montage M88DS3103 (SAT)* status 1f | signal 585e | *snr 0096* | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 585e | *snr 0096* | ber 00000000 | unc 00000000 | FE_HAS_LOCK xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a2 *using '/dev/dvb/adapter2/frontend0'** **FE: Montage M88DS3103 (SAT)* status 1f | signal 6c07 | *snr 0096* | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 6c07 | *snr 0096* | ber 00000000 | unc 00000000 | FE_HAS_LOCK xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a0 *using '/dev/dvb/adapter0/frontend0'** **FE: STV090x Multistandard (SAT)* status 1f | signal a3d6 | *snr bccb* | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal a3d6 | *snr bd2e* | ber 00000000 | unc 00000000 | FE_HAS_LOCK Here the dmesg output of the loaded drivers and firmware of the DVBSky Card: dmesg | egrep "cx23885|i2c|m88ds3103" c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add DVBSky T982(Dual DVB-T2/T/C) support 9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x device name i2c_devs array c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add DVBSky T982(Dual DVB-T2/T/C) support 9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x device name i2c_devs array c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add DVBSky T982(Dual DVB-T2/T/C) support 9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x device name i2c_devs array [ 16.396426] cx23885 driver version 0.0.4 loaded [ 16.396558] CORE cx23885[0]: subsystem: 4254:0952, board: DVBSky S952 [card=50,autodetected] [ 16.838409] cx25840 4-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0]) [ 16.909538] cx25840 4-0044: firmware: direct-loading firmware v4l-cx23885-avcore-01.fw [ 17.518086] cx25840 4-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) [ 17.533358] cx23885_dvb_register() allocating 1 frontend(s) [ 17.533362] cx23885[0]: cx23885 based dvb card [ 17.670143] i2c i2c-3: m88ds3103_attach: chip_id=70 [ 17.672970] i2c i2c-3: Added multiplexed i2c bus 5 [ 17.780353] DVB: registering new adapter (cx23885[0]) [ 17.780357] cx23885 0000:04:00.0: DVB: registering adapter 1 frontend 0 (Montage M88DS3103)... [ 17.807503] cx23885_dvb_register() allocating 1 frontend(s) [ 17.807505] cx23885[0]: cx23885 based dvb card [ 17.807987] i2c i2c-2: m88ds3103_attach: chip_id=70 [ 17.810783] i2c i2c-2: Added multiplexed i2c bus 6 [ 17.866021] DVB: registering new adapter (cx23885[0]) [ 17.866025] cx23885 0000:04:00.0: DVB: registering adapter 2 frontend 0 (Montage M88DS3103)... [ 17.893182] cx23885_dev_checkrevision() Hardware revision = 0xa5 [ 17.893187] cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 19, latency: 0, mmio: 0xfda00000 [ 51.512292] i2c i2c-3: m88ds3103: found a 'Montage M88DS3103' in cold state [ 51.818948] cx23885 0000:04:00.0: firmware: direct-loading firmware dvb-demod-m88ds3103.fw [ 51.818958] i2c i2c-3: m88ds3103: downloading firmware from file 'dvb-demod-m88ds3103.fw' [ 52.720270] i2c i2c-3: m88ds3103: found a 'Montage M88DS3103' in warm state [ 52.720276] i2c i2c-3: m88ds3103: firmware version 3.B [ 52.734588] i2c i2c-2: m88ds3103: found a 'Montage M88DS3103' in cold state [ 52.734618] cx23885 0000:04:00.0: firmware: direct-loading firmware dvb-demod-m88ds3103.fw [ 52.734621] i2c i2c-2: m88ds3103: downloading firmware from file 'dvb-demod-m88ds3103.fw' [ 53.636110] i2c i2c-2: m88ds3103: found a 'Montage M88DS3103' in warm state [ 53.636115] i2c i2c-2: m88ds3103: firmware version 3.B Thanks a lot for your help. Regards, Chris Am 18.11.2014 um 03:27 schrieb tech: > Hello, > > Could you get the media code from linuxtv.org? > and build this driver and install. > http://git.linuxtv.org/cgit.cgi/media_build.git/about/ > > BR, > tech > ------------------------------------------------------------------------ > *From:* Christopher Scheuring<chris@anke-und-chris.de > <mailto:chris@anke-und-chris.de>> > *Date:* 2014-11-18 06:07:27 > *To:* tech<tech@dvbsky.net <mailto:tech@dvbsky.net>> > *Cc:* <> > *Subject:* Problems with Linux drivers (Debian Jessie kernel 3.16.0-4) > Hi, > > I reinstalled after updating my system with the Linux drivers for the > dvbsky cards provided by your site (media_build-bst-14-141106). > > Compiling with the build_x64.sh script was successfully and I could > install the needed drivers via make install. After that the Conexant > Systems CX23885 (DVBSKY S952) card works perfectly. > > Unfortunately after installing the drivers my Philips Semiconductors > SAA7146 (TT-Budget C-1501) card doesn't runs anymore - the card worked > perfectly before installing the provided drivers from your page! > > If got following error message in the kernel-log: > [ 14.916814] budget_core: disagrees about version of symbol > dvb_dmxdev_init > [ 14.916819] budget_core: Unknown symbol dvb_dmxdev_init (err -22) > [ 14.916827] budget_core: disagrees about version of symbol > saa7146_wait_for_debi_done > [ 14.916829] budget_core: Unknown symbol saa7146_wait_for_debi_done > (err -22) > [ 14.916832] budget_core: disagrees about version of symbol > saa7146_i2c_adapter_prepare > [ 14.916833] budget_core: Unknown symbol saa7146_i2c_adapter_prepare > (err -22) > [ 14.916840] budget_core: disagrees about version of symbol > dvb_register_adapter > [ 14.916841] budget_core: Unknown symbol dvb_register_adapter (err -22) > [ 14.916846] budget_core: disagrees about version of symbol > dvb_dmx_swfilter_packets > [ 14.916848] budget_core: Unknown symbol dvb_dmx_swfilter_packets > (err -22) > [ 14.916862] budget_core: disagrees about version of symbol > dvb_dmx_release > [ 14.916864] budget_core: Unknown symbol dvb_dmx_release (err -22) > [ 14.916869] budget_core: disagrees about version of symbol dvb_net_init > [ 14.916871] budget_core: Unknown symbol dvb_net_init (err -22) > [ 14.916875] budget_core: disagrees about version of symbol > dvb_dmxdev_release > [ 14.916877] budget_core: Unknown symbol dvb_dmxdev_release (err -22) > [ 14.916890] budget_core: disagrees about version of symbol > dvb_net_release > [ 14.916892] budget_core: Unknown symbol dvb_net_release (err -22) > [ 14.916896] budget_core: disagrees about version of symbol > saa7146_setgpio > [ 14.916897] budget_core: Unknown symbol saa7146_setgpio (err -22) > [ 14.916902] budget_core: disagrees about version of symbol > dvb_unregister_adapter > [ 14.916904] budget_core: Unknown symbol dvb_unregister_adapter (err > -22) > [ 14.916907] budget_core: disagrees about version of symbol dvb_dmx_init > [ 14.916908] budget_core: Unknown symbol dvb_dmx_init (err -22) > > > > I think something went wrong with the provided driver packes or some > drivers where overwritten, and some necessary not... I couldn't found > any solution in the internet. > > Here my relevant system-infos: > Linux XXX 3.16.0-4-amd64 #1 SMP Debian 3.16.7-2 (2014-11-06) x86_64 > GNU/Linux > > The needed kernel header files 3.16.0-4-amd64 are installed. > > lsmod | grep dvb > rc_dvbsky 12399 0 > dvbsky_m88ds3103 25614 2 > videobuf_dvb 12762 1 cx23885 > videobuf_core 21832 3 videobuf_dma_sg,cx23885,videobuf_dvb > dvb_core 102010 3 cx23885,altera_ci,videobuf_dvb > i2c_core 46012 11 > drm,i2c_i801,cx23885,cx25840,dvbsky_m88ds3103,nvidia,v4l2_common,tveeprom,ttpci_eeprom,tda18271,videodev > rc_core 22404 13 > ir_sharp_decoder,lirc_dev,cx23885,ir_lirc_codec,ir_rc5_decoder,ir_nec_decoder,ir_sony_decoder,rc_dvbsky,ir_mce_kbd_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_sanyo_decoder > > > > Could you provide me any help for a solution getting the SAA7146 > (TT-Budget C-1501) card working again with the kernel 3.16.0-4? With > the kernel 3.2.0-4-amd64 (with Debian wheezy) and the drivers > media_build-bst-13-140526 I didn't had the problems... everything > worked fine. Downgrading is no solution :-) > > Attached the complete dmesg protocol. > > > Thanks a lot! > > Regards, > Chris > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel 3.16.0-4) [not found] ` <546CEF67.9060803@anke-und-chris.de> 2014-11-19 19:55 ` Fwd: Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel 3.16.0-4) Christopher Scheuring @ 2014-11-20 7:01 ` Antti Palosaari 2014-11-20 12:53 ` Christopher Scheuring 2014-11-21 2:30 ` Re: Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel3.16.0-4) Nibble Max 1 sibling, 2 replies; 5+ messages in thread From: Antti Palosaari @ 2014-11-20 7:01 UTC (permalink / raw) To: Christopher Scheuring; +Cc: linux-media Moikka According to logs, everything seems to be fine. You could not compare statistics numbers between two drivers. SNR 0096 is 150DEC, which means 15dB, IIRC it was max chip could return for DVB-S. No idea about sync etc. problems, are you sure about those? I am pretty sure it works rather well as I haven't got bug reports from PCTV 461e users which has that same demod + tuner. regards Antti On 11/19/2014 09:28 PM, Christopher Scheuring wrote: > Hello Antti, > > the guys from tech@dvbsky.net told me to contact you because of my > problems with the drivers for my DVBSKY S952. > > I attached the whole conversation. Currently the main problem is if i > use the current drivers via > git(http://git.linuxtv.org/cgit.cgi/media_build.git/about/) my single > TT-Budget card works fine. But the signal from the DVDBSky S952 is very > worse: Sync problems, bad SNR, drops on video and audio... If I use the > driver dvbsky.net provides (media_build-bst-14-141106), the signal on > booth tuners is fine - but then my TT-Budget doesn't works anymore (see > end of this mail aka starting the conversation with tech@dvbsky.net). > > Do you have any ideas, how I could fix this problem? Before I updated my > system (from Debian Wheezy with Kernel 3.2.0-4-amd64 everything was fine > with both cards. > > > If you need more detailed information, please let me know, so I could > provide them as soon as possible, > > Thanks a lot and best wishes > Chris > > > -------- Weitergeleitete Nachricht -------- > Betreff: Re: Re: Problems with Linux drivers (Debian Jessie kernel > 3.16.0-4) > Datum: Wed, 19 Nov 2014 10:28:06 +0800 > Von: tech <tech@dvbsky.net> > An: Christopher Scheuring <chris@anke-und-chris.de> > > > > Hello, > Could you report this problem to Antti Palosaari crope@iki.fi > <mailto:crope@iki.fi> and cc to linux-media@vger.kernel.org ? > Antti is the author/maintainer of M88DS3103 driver. > Please list the compare result of the driver from DVBSky site and > Linuxtv.org. > Max from DVBSky also register linux-media mail list. > He will get your report and co-work with Antti to fix this issue of > M88DS3103 driver from Linuxtv.org. > BR, > tech > ------------------------------------------------------------------------ > *From:* Christopher Scheuring<chris@anke-und-chris.de > <mailto:chris@anke-und-chris.de>> > *Date:* 2014-11-19 04:42:10 > *To:* tech<tech@dvbsky.net <mailto:tech@dvbsky.net>> > *Cc:* <> > *Subject:* Re: Problems with Linux drivers (Debian Jessie kernel 3.16.0-4) > Hello, > > with the drivers from linuxtv.org and the firmware provided by your > site, both cards work. > > But the DVBSky card (Montage M88DS3103) do now have a really bad > SNR!TT-Budget C-1501 works as expected. See the output of femon - the > signal of the DVBSky card was excellent with the drivers from you > site... Any idea, what could cause the problem? TV signal provided by > the DVBSky sometimes drops :-( > > xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a1 > *using '/dev/dvb/adapter1/frontend0'** > **FE: Montage M88DS3103 (SAT)* > status 1f | signal 585e | *snr 0096* | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal 585e | *snr 0096* | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > > > xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a2 > *using '/dev/dvb/adapter2/frontend0'** > **FE: Montage M88DS3103 (SAT)* > status 1f | signal 6c07 | *snr 0096* | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal 6c07 | *snr 0096* | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > > > xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a0 > *using '/dev/dvb/adapter0/frontend0'** > **FE: STV090x Multistandard (SAT)* > status 1f | signal a3d6 | *snr bccb* | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > status 1f | signal a3d6 | *snr bd2e* | ber 00000000 | unc 00000000 | > FE_HAS_LOCK > > > Here the dmesg output of the loaded drivers and firmware of the DVBSky Card: > > dmesg | egrep "cx23885|i2c|m88ds3103" > c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add > DVBSky T982(Dual DVB-T2/T/C) support > 9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x > device name i2c_devs array > c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add > DVBSky T982(Dual DVB-T2/T/C) support > 9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x > device name i2c_devs array > c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add > DVBSky T982(Dual DVB-T2/T/C) support > 9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x > device name i2c_devs array > [ 16.396426] cx23885 driver version 0.0.4 loaded > [ 16.396558] CORE cx23885[0]: subsystem: 4254:0952, board: DVBSky S952 > [card=50,autodetected] > [ 16.838409] cx25840 4-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0]) > [ 16.909538] cx25840 4-0044: firmware: direct-loading firmware > v4l-cx23885-avcore-01.fw > [ 17.518086] cx25840 4-0044: loaded v4l-cx23885-avcore-01.fw firmware > (16382 bytes) > [ 17.533358] cx23885_dvb_register() allocating 1 frontend(s) > [ 17.533362] cx23885[0]: cx23885 based dvb card > [ 17.670143] i2c i2c-3: m88ds3103_attach: chip_id=70 > [ 17.672970] i2c i2c-3: Added multiplexed i2c bus 5 > [ 17.780353] DVB: registering new adapter (cx23885[0]) > [ 17.780357] cx23885 0000:04:00.0: DVB: registering adapter 1 frontend > 0 (Montage M88DS3103)... > [ 17.807503] cx23885_dvb_register() allocating 1 frontend(s) > [ 17.807505] cx23885[0]: cx23885 based dvb card > [ 17.807987] i2c i2c-2: m88ds3103_attach: chip_id=70 > [ 17.810783] i2c i2c-2: Added multiplexed i2c bus 6 > [ 17.866021] DVB: registering new adapter (cx23885[0]) > [ 17.866025] cx23885 0000:04:00.0: DVB: registering adapter 2 frontend > 0 (Montage M88DS3103)... > [ 17.893182] cx23885_dev_checkrevision() Hardware revision = 0xa5 > [ 17.893187] cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 19, > latency: 0, mmio: 0xfda00000 > [ 51.512292] i2c i2c-3: m88ds3103: found a 'Montage M88DS3103' in cold > state > [ 51.818948] cx23885 0000:04:00.0: firmware: direct-loading firmware > dvb-demod-m88ds3103.fw > [ 51.818958] i2c i2c-3: m88ds3103: downloading firmware from file > 'dvb-demod-m88ds3103.fw' > [ 52.720270] i2c i2c-3: m88ds3103: found a 'Montage M88DS3103' in warm > state > [ 52.720276] i2c i2c-3: m88ds3103: firmware version 3.B > [ 52.734588] i2c i2c-2: m88ds3103: found a 'Montage M88DS3103' in cold > state > [ 52.734618] cx23885 0000:04:00.0: firmware: direct-loading firmware > dvb-demod-m88ds3103.fw > [ 52.734621] i2c i2c-2: m88ds3103: downloading firmware from file > 'dvb-demod-m88ds3103.fw' > [ 53.636110] i2c i2c-2: m88ds3103: found a 'Montage M88DS3103' in warm > state > [ 53.636115] i2c i2c-2: m88ds3103: firmware version 3.B > > > Thanks a lot for your help. > > Regards, > Chris > > > > Am 18.11.2014 um 03:27 schrieb tech: >> Hello, >> Could you get the media code from linuxtv.org? >> and build this driver and install. >> http://git.linuxtv.org/cgit.cgi/media_build.git/about/ >> BR, >> tech >> ------------------------------------------------------------------------ >> *From:* Christopher Scheuring<chris@anke-und-chris.de >> <mailto:chris@anke-und-chris.de>> >> *Date:* 2014-11-18 06:07:27 >> *To:* tech<tech@dvbsky.net <mailto:tech@dvbsky.net>> >> *Cc:* <> >> *Subject:* Problems with Linux drivers (Debian Jessie kernel 3.16.0-4) >> Hi, >> >> I reinstalled after updating my system with the Linux drivers for the >> dvbsky cards provided by your site (media_build-bst-14-141106). >> >> Compiling with the build_x64.sh script was successfully and I could >> install the needed drivers via make install. After that the Conexant >> Systems CX23885 (DVBSKY S952) card works perfectly. >> >> Unfortunately after installing the drivers my Philips Semiconductors >> SAA7146 (TT-Budget C-1501) card doesn't runs anymore - the card worked >> perfectly before installing the provided drivers from your page! >> >> If got following error message in the kernel-log: >> [ 14.916814] budget_core: disagrees about version of symbol >> dvb_dmxdev_init >> [ 14.916819] budget_core: Unknown symbol dvb_dmxdev_init (err -22) >> [ 14.916827] budget_core: disagrees about version of symbol >> saa7146_wait_for_debi_done >> [ 14.916829] budget_core: Unknown symbol saa7146_wait_for_debi_done >> (err -22) >> [ 14.916832] budget_core: disagrees about version of symbol >> saa7146_i2c_adapter_prepare >> [ 14.916833] budget_core: Unknown symbol saa7146_i2c_adapter_prepare >> (err -22) >> [ 14.916840] budget_core: disagrees about version of symbol >> dvb_register_adapter >> [ 14.916841] budget_core: Unknown symbol dvb_register_adapter (err -22) >> [ 14.916846] budget_core: disagrees about version of symbol >> dvb_dmx_swfilter_packets >> [ 14.916848] budget_core: Unknown symbol dvb_dmx_swfilter_packets >> (err -22) >> [ 14.916862] budget_core: disagrees about version of symbol >> dvb_dmx_release >> [ 14.916864] budget_core: Unknown symbol dvb_dmx_release (err -22) >> [ 14.916869] budget_core: disagrees about version of symbol dvb_net_init >> [ 14.916871] budget_core: Unknown symbol dvb_net_init (err -22) >> [ 14.916875] budget_core: disagrees about version of symbol >> dvb_dmxdev_release >> [ 14.916877] budget_core: Unknown symbol dvb_dmxdev_release (err -22) >> [ 14.916890] budget_core: disagrees about version of symbol >> dvb_net_release >> [ 14.916892] budget_core: Unknown symbol dvb_net_release (err -22) >> [ 14.916896] budget_core: disagrees about version of symbol >> saa7146_setgpio >> [ 14.916897] budget_core: Unknown symbol saa7146_setgpio (err -22) >> [ 14.916902] budget_core: disagrees about version of symbol >> dvb_unregister_adapter >> [ 14.916904] budget_core: Unknown symbol dvb_unregister_adapter (err >> -22) >> [ 14.916907] budget_core: disagrees about version of symbol dvb_dmx_init >> [ 14.916908] budget_core: Unknown symbol dvb_dmx_init (err -22) >> >> >> >> I think something went wrong with the provided driver packes or some >> drivers where overwritten, and some necessary not... I couldn't found >> any solution in the internet. >> >> Here my relevant system-infos: >> Linux XXX 3.16.0-4-amd64 #1 SMP Debian 3.16.7-2 (2014-11-06) x86_64 >> GNU/Linux >> >> The needed kernel header files 3.16.0-4-amd64 are installed. >> >> lsmod | grep dvb >> rc_dvbsky 12399 0 >> dvbsky_m88ds3103 25614 2 >> videobuf_dvb 12762 1 cx23885 >> videobuf_core 21832 3 videobuf_dma_sg,cx23885,videobuf_dvb >> dvb_core 102010 3 cx23885,altera_ci,videobuf_dvb >> i2c_core 46012 11 >> drm,i2c_i801,cx23885,cx25840,dvbsky_m88ds3103,nvidia,v4l2_common,tveeprom,ttpci_eeprom,tda18271,videodev >> rc_core 22404 13 >> ir_sharp_decoder,lirc_dev,cx23885,ir_lirc_codec,ir_rc5_decoder,ir_nec_decoder,ir_sony_decoder,rc_dvbsky,ir_mce_kbd_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_sanyo_decoder >> >> >> >> Could you provide me any help for a solution getting the SAA7146 >> (TT-Budget C-1501) card working again with the kernel 3.16.0-4? With >> the kernel 3.2.0-4-amd64 (with Debian wheezy) and the drivers >> media_build-bst-13-140526 I didn't had the problems... everything >> worked fine. Downgrading is no solution :-) >> >> Attached the complete dmesg protocol. >> >> >> Thanks a lot! >> >> Regards, >> Chris >> > > > -- http://palosaari.fi/ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel 3.16.0-4) 2014-11-20 7:01 ` Antti Palosaari @ 2014-11-20 12:53 ` Christopher Scheuring 2014-11-21 2:30 ` Re: Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel3.16.0-4) Nibble Max 1 sibling, 0 replies; 5+ messages in thread From: Christopher Scheuring @ 2014-11-20 12:53 UTC (permalink / raw) To: Antti Palosaari; +Cc: linux-media Hello, I yust checked the SNR Level the DVBSky-Card providing with the drivers from dvbsky.net (media_build-bst-14-141106): # ./femon -a 0 using '/dev/dvb/adapter0/frontend0' FE: Montage DS3103/TS2022 (SAT) status 1f | signal 7323 | snr b064 | ber 00000000 | unc 00000000 | FE_HAS_LOCK # ./femon -a 1 using '/dev/dvb/adapter1/frontend0' FE: Montage DS3103/TS2022 (SAT) status 1f | signal 7a71 | snr 2a17 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Looks "better" than with driver from linuxtv.org via git. And I don't have any sync problems or video / audio drops. I currently determined following: * Using the drivers from dvbsky.net the card is "Montage DS3103/TS2022" => Loading FW dvb-fe-ds3103.fw * With the drivers from linuxtv.org the card is "Montage M88DS3103" => Loading FW dvb-demod-m88ds3103.fw I'm a bit confused... perhaps if I use the linuxtv.org drivers, the card is recognized wrong and that's the problem? Regards, Chris On Thu, 20 Nov 2014 09:01:23 +0200, Antti Palosaari <crope@iki.fi> wrote: > Moikka > According to logs, everything seems to be fine. You could not compare > statistics numbers between two drivers. SNR 0096 is 150DEC, which means > 15dB, IIRC it was max chip could return for DVB-S. > > No idea about sync etc. problems, are you sure about those? I am pretty > sure it works rather well as I haven't got bug reports from PCTV 461e > users which has that same demod + tuner. > > regards > Antti > > > > On 11/19/2014 09:28 PM, Christopher Scheuring wrote: >> Hello Antti, >> >> the guys from tech@dvbsky.net told me to contact you because of my >> problems with the drivers for my DVBSKY S952. >> >> I attached the whole conversation. Currently the main problem is if i >> use the current drivers via >> git(http://git.linuxtv.org/cgit.cgi/media_build.git/about/) my single >> TT-Budget card works fine. But the signal from the DVDBSky S952 is very >> worse: Sync problems, bad SNR, drops on video and audio... If I use the >> driver dvbsky.net provides (media_build-bst-14-141106), the signal on >> booth tuners is fine - but then my TT-Budget doesn't works anymore (see >> end of this mail aka starting the conversation with tech@dvbsky.net). >> >> Do you have any ideas, how I could fix this problem? Before I updated my >> system (from Debian Wheezy with Kernel 3.2.0-4-amd64 everything was fine >> with both cards. >> >> >> If you need more detailed information, please let me know, so I could >> provide them as soon as possible, >> >> Thanks a lot and best wishes >> Chris >> >> >> -------- Weitergeleitete Nachricht -------- >> Betreff: Re: Re: Problems with Linux drivers (Debian Jessie kernel >> 3.16.0-4) >> Datum: Wed, 19 Nov 2014 10:28:06 +0800 >> Von: tech <tech@dvbsky.net> >> An: Christopher Scheuring <chris@anke-und-chris.de> >> >> >> >> Hello, >> Could you report this problem to Antti Palosaari crope@iki.fi >> <mailto:crope@iki.fi> and cc to linux-media@vger.kernel.org ? >> Antti is the author/maintainer of M88DS3103 driver.Montage M88DS3103 (SAT)* >> Please list the compare result of the driver from DVBSky site and >> Linuxtv.org. >> Max from DVBSky also register linux-media mail list. >> He will get your report and co-work with Antti to fix this issue of >> M88DS3103 driver from Linuxtv.org. >> BR, >> tech >> ------------------------------------------------------------------------ >> *From:* Christopher Scheuring<chris@anke-und-chris.de >> <mailto:chris@anke-und-chris.de>> >> *Date:* 2014-11-19 04:42:10 >> *To:* tech<tech@dvbsky.net <mailto:tech@dvbsky.net>> >> *Cc:* <> >> *Subject:* Re: Problems with Linux drivers (Debian Jessie kernel >> 3.16.0-4) >> Hello, >> >> with the drivers from linuxtv.org and the firmware provided by your >> site, both cards work. >> >> But the DVBSky card (Montage M88DS3103) do now have a really bad >> SNR!TT-Budget C-1501 works as expected. See the output of femon - the >> signal of the DVBSky card was excellent with the drivers from you >> site... Any idea, what could cause the problem? TV signal provided by >> the DVBSky sometimes drops :-( >> >> xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a1 >> *using '/dev/dvb/adapter1/frontend0'** >> **FE: Montage M88DS3103 (SAT)* >> status 1f | signal 585e | *snr 0096* | ber 00000000 | unc 00000000 | >> FE_HAS_LOCK >> status 1f | signal 585e | *snr 0096* | ber 00000000 | unc 00000000 | >> FE_HAS_LOCK >> >> >> xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a2 >> *using '/dev/dvb/adapter2/frontend0'** >> **FE: Montage M88DS3103 (SAT)* >> status 1f | signal 6c07 | *snr 0096* | ber 00000000 | unc 00000000 | >> FE_HAS_LOCK >> status 1f | signal 6c07 | *snr 0096* | ber 00000000 | unc 00000000 | >> FE_HAS_LOCK >> >> >> xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a0 >> *using '/dev/dvb/adapter0/frontend0'** >> **FE: STV090x Multistandard (SAT)* >> status 1f | signal a3d6 | *snr bccb* | ber 00000000 | unc 00000000 | >> FE_HAS_LOCK >> status 1f | signal a3d6 | *snr bd2e* | ber 00000000 | unc 00000000 | >> FE_HAS_LOCK >> >> >> Here the dmesg output of the loaded drivers and firmware of the DVBSky >> Card: >> >> dmesg | egrep "cx23885|i2c|m88ds3103" >> c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add >> DVBSky T982(Dual DVB-T2/T/C) support >> 9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x >> device name i2c_devs array >> c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add >> DVBSky T982(Dual DVB-T2/T/C) support >> 9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x >> device name i2c_devs array >> c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add >> DVBSky T982(Dual DVB-T2/T/C) support >> 9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x >> device name i2c_devs array >> [ 16.396426] cx23885 driver version 0.0.4 loaded >> [ 16.396558] CORE cx23885[0]: subsystem: 4254:0952, board: DVBSky S952 >> [card=50,autodetected] >> [ 16.838409] cx25840 4-0044: cx23885 A/V decoder found @ 0x88 >> (cx23885[0]) >> [ 16.909538] cx25840 4-0044: firmware: direct-loading firmware >> v4l-cx23885-avcore-01.fw >> [ 17.518086] cx25840 4-0044: loaded v4l-cx23885-avcore-01.fw firmware >> (16382 bytes) >> [ 17.533358] cx23885_dvb_register() allocating 1 frontend(s) >> [ 17.533362] cx23885[0]: cx23885 based dvb card >> [ 17.670143] i2c i2c-3: m88ds3103_attach: chip_id=70 >> [ 17.672970] i2c i2c-3: Added multiplexed i2c bus 5 >> [ 17.780353] DVB: registering new adapter (cx23885[0]) >> [ 17.780357] cx23885 0000:04:00.0: DVB: registering adapter 1 frontend >> 0 (Montage M88DS3103)... >> [ 17.807503] cx23885_dvb_register() allocating 1 frontend(s) >> [ 17.807505] cx23885[0]: cx23885 based dvb card >> [ 17.807987] i2c i2c-2: m88ds3103_attach: chip_id=70 >> [ 17.810783] i2c i2c-2: Added multiplexed i2c bus 6 >> [ 17.866021] DVB: registering new adapter (cx23885[0]) >> [ 17.866025] cx23885 0000:04:00.0: DVB: registering adapter 2 frontend >> 0 (Montage M88DS3103)... >> [ 17.893182] cx23885_dev_checkrevision() Hardware revision = 0xa5 >> [ 17.893187] cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 19, >> latency: 0, mmio: 0xfda00000 >> [ 51.512292] i2c i2c-3: m88ds3103: found a 'Montage M88DS3103' in cold >> state >> [ 51.818948] cx23885 0000:04:00.0: firmware: direct-loading firmware >> dvb-demod-m88ds3103.fw >> [ 51.818958] i2c i2c-3: m88ds3103: downloading firmware from file >> 'dvb-demod-m88ds3103.fw' >> [ 52.720270] i2c i2c-3: m88ds3103: found a 'Montage M88DS3103' in warm >> state >> [ 52.720276] i2c i2c-3: m88ds3103: firmware version 3.B >> [ 52.734588] i2c i2c-2: m88ds3103: found a 'Montage M88DS3103' in cold >> state >> [ 52.734618] cx23885 0000:04:00.0: firmware: direct-loading firmware >> dvb-demod-m88ds3103.fw >> [ 52.734621] i2c i2c-2: m88ds3103: downloading firmware from file >> 'dvb-demod-m88ds3103.fw' >> [ 53.636110] i2c i2c-2: m88ds3103: found a 'Montage M88DS3103' in warm >> state >> [ 53.636115] i2c i2c-2: m88ds3103: firmware version 3.B >> >> >> Thanks a lot for your help. >> >> Regards, >> Chris >> >> >> >> Am 18.11.2014 um 03:27 schrieb tech: >>> Hello, >>> Could you get the media code from linuxtv.org? >>> and build this driver and install. >>> http://git.linuxtv.org/cgit.cgi/media_build.git/about/ >>> BR, >>> tech >>> ------------------------------------------------------------------------ >>> *From:* Christopher Scheuring<chris@anke-und-chris.de >>> <mailto:chris@anke-und-chris.de>> >>> *Date:* 2014-11-18 06:07:27 >>> *To:* tech<tech@dvbsky.net <mailto:tech@dvbsky.net>> >>> *Cc:* <> >>> *Subject:* Problems with Linux drivers (Debian Jessie kernel 3.16.0-4) >>> Hi, >>> >>> I reinstalled after updating my system with the Linux drivers for the >>> dvbsky cards provided by your site (media_build-bst-14-141106). >>> >>> Compiling with the build_x64.sh script was successfully and I could >>> install the needed drivers via make install. After that the Conexant >>> Systems CX23885 (DVBSKY S952) card works perfectly. >>> >>> Unfortunately after installing the drivers my Philips Semiconductors >>> SAA7146 (TT-Budget C-1501) card doesn't runs anymore - the card worked >>> perfectly before installing the provided drivers from your page! >>> >>> If got following error message in the kernel-log: >>> [ 14.916814] budget_core: disagrees about version of symbol >>> dvb_dmxdev_init >>> [ 14.916819] budget_core: Unknown symbol dvb_dmxdev_init (err -22) >>> [ 14.916827] budget_core: disagrees about version of symbol >>> saa7146_wait_for_debi_done >>> [ 14.916829] budget_core: Unknown symbol saa7146_wait_for_debi_done >>> (err -22) >>> [ 14.916832] budget_core: disagrees about version of symbol >>> saa7146_i2c_adapter_prepare >>> [ 14.916833] budget_core: Unknown symbol saa7146_i2c_adapter_prepare >>> (err -22) >>> [ 14.916840] budget_core: disagrees about version of symbol >>> dvb_register_adapter >>> [ 14.916841] budget_core: Unknown symbol dvb_register_adapter (err >>> -22) >>> [ 14.916846] budget_core: disagrees about version of symbol >>> dvb_dmx_swfilter_packets >>> [ 14.916848] budget_core: Unknown symbol dvb_dmx_swfilter_packets >>> (err -22) >>> [ 14.916862] budget_core: disagrees about version of symbol >>> dvb_dmx_release >>> [ 14.916864] budget_core: Unknown symbol dvb_dmx_release (err -22) >>> [ 14.916869] budget_core: disagrees about version of symbol >>> dvb_net_init >>> [ 14.916871] budget_core: Unknown symbol dvb_net_init (err -22) >>> [ 14.916875] budget_core: disagrees about version of symbol >>> dvb_dmxdev_release >>> [ 14.916877] budget_core: Unknown symbol dvb_dmxdev_release (err -22) >>> [ 14.916890] budget_core: disagrees about version of symbol >>> dvb_net_release >>> [ 14.916892] budget_core: Unknown symbol dvb_net_release (err -22) >>> [ 14.916896] budget_core: disagrees about version of symbol >>> saa7146_setgpio >>> [ 14.916897] budget_core: Unknown symbol saa7146_setgpio (err -22) >>> [ 14.916902] budget_core: disagrees about version of symbol >>> dvb_unregister_adapter >>> [ 14.916904] budget_core: Unknown symbol dvb_unregister_adapter (err >>> -22) >>> [ 14.916907] budget_core: disagrees about version of symbol >>> dvb_dmx_init >>> [ 14.916908] budget_core: Unknown symbol dvb_dmx_init (err -22) >>> >>> >>> >>> I think something went wrong with the provided driver packes or some >>> drivers where overwritten, and some necessary not... I couldn't found >>> any solution in the internet. >>> >>> Here my relevant system-infos: >>> Linux XXX 3.16.0-4-amd64 #1 SMP Debian 3.16.7-2 (2014-11-06) x86_64 >>> GNU/Linux >>> >>> The needed kernel header files 3.16.0-4-amd64 are installed. >>> >>> lsmod | grep dvb >>> rc_dvbsky 12399 0 >>> dvbsky_m88ds3103 25614 2 >>> videobuf_dvb 12762 1 cx23885 >>> videobuf_core 21832 3 videobuf_dma_sg,cx23885,videobuf_dvb >>> dvb_core 102010 3 cx23885,altera_ci,videobuf_dvb >>> i2c_core 46012 11 >>> drm,i2c_i801,cx23885,cx25840,dvbsky_m88ds3103,nvidia,v4l2_common,tveeprom,ttpci_eeprom,tda18271,videodev >>> rc_core 22404 13 >>> ir_sharp_decoder,lirc_dev,cx23885,ir_lirc_codec,ir_rc5_decoder,ir_nec_decoder,ir_sony_decoder,rc_dvbsky,ir_mce_kbd_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_sanyo_decoder >>> >>> >>> >>> Could you provide me any help for a solution getting the SAA7146 >>> (TT-Budget C-1501) card working again with the kernel 3.16.0-4? With >>> the kernel 3.2.0-4-amd64 (with Debian wheezy) and the drivers >>> media_build-bst-13-140526 I didn't had the problems... everything >>> worked fine. Downgrading is no solution :-) >>> >>> Attached the complete dmesg protocol. >>> >>> >>> Thanks a lot! >>> >>> Regards, >>> Chris >>> >> >> >> -- Christopher Scheuring *** chris@anke-und-chris.de ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Re: Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel3.16.0-4) 2014-11-20 7:01 ` Antti Palosaari 2014-11-20 12:53 ` Christopher Scheuring @ 2014-11-21 2:30 ` Nibble Max 2014-12-16 12:45 ` Christopher Scheuring 1 sibling, 1 reply; 5+ messages in thread From: Nibble Max @ 2014-11-21 2:30 UTC (permalink / raw) To: Christopher Scheuring; +Cc: linux-media@vger.kernel.org, Antti Palosaari Hello Chris, Do all of your transponders have such issue or only some special transponders? Could you list the parameters for them? for example, dvb-s or dvb-s2 type, frequency, symbol rate. The dvbsky.net firmware "dvb-fe-ds3103.fw" is version 3.7. Annti uses the firmware "dvb-demod-m88ds3103.fw", which is version 3.B. But we test both firmwares work well. You can change one to the other's file name for check. Best Regards, Max On 2014-11-20 20:56:07, Christopher Scheuring <chris@anke-und-chris.de> wrote: >Hello, > >I yust checked the SNR Level the DVBSky-Card providing with the >drivers from dvbsky.net (media_build-bst-14-141106): > ># ./femon -a 0 >using '/dev/dvb/adapter0/frontend0' >FE: Montage DS3103/TS2022 (SAT) >status 1f | signal 7323 | snr b064 | ber 00000000 | unc 00000000 | >FE_HAS_LOCK > ># ./femon -a 1 >using '/dev/dvb/adapter1/frontend0' >FE: Montage DS3103/TS2022 (SAT) >status 1f | signal 7a71 | snr 2a17 | ber 00000000 | unc 00000000 | >FE_HAS_LOCK > > >Looks "better" than with driver from linuxtv.org via git. And I >don't have any sync problems or video / audio drops. > > >I currently determined following: >* Using the drivers from dvbsky.net the card is "Montage DS3103/TS2022" > => Loading FW dvb-fe-ds3103.fw >* With the drivers from linuxtv.org the card is "Montage M88DS3103" > => Loading FW dvb-demod-m88ds3103.fw > > >I'm a bit confused... perhaps if I use the linuxtv.org drivers, the >card is recognized wrong and that's the problem? > > >Regards, >Chris > > >On Thu, 20 Nov 2014 09:01:23 +0200, Antti Palosaari <crope@iki.fi> wrote: >> Moikka >> According to logs, everything seems to be fine. You could not compare >> statistics numbers between two drivers. SNR 0096 is 150DEC, which means >> 15dB, IIRC it was max chip could return for DVB-S. >> >> No idea about sync etc. problems, are you sure about those? I am pretty >> sure it works rather well as I haven't got bug reports from PCTV 461e >> users which has that same demod + tuner. >> >> regards >> Antti >> >> >> >> On 11/19/2014 09:28 PM, Christopher Scheuring wrote: >>> Hello Antti, >>> >>> the guys from tech@dvbsky.net told me to contact you because of my >>> problems with the drivers for my DVBSKY S952. >>> >>> I attached the whole conversation. Currently the main problem is if i >>> use the current drivers via >>> git(http://git.linuxtv.org/cgit.cgi/media_build.git/about/) my single >>> TT-Budget card works fine. But the signal from the DVDBSky S952 is very >>> worse: Sync problems, bad SNR, drops on video and audio... If I use the >>> driver dvbsky.net provides (media_build-bst-14-141106), the signal on >>> booth tuners is fine - but then my TT-Budget doesn't works anymore (see >>> end of this mail aka starting the conversation with tech@dvbsky.net). >>> >>> Do you have any ideas, how I could fix this problem? Before I updated >my >>> system (from Debian Wheezy with Kernel 3.2.0-4-amd64 everything was >fine >>> with both cards. >>> >>> >>> If you need more detailed information, please let me know, so I could >>> provide them as soon as possible, >>> >>> Thanks a lot and best wishes >>> Chris >>> >>> >>> -------- Weitergeleitete Nachricht -------- >>> Betreff: Re: Re: Problems with Linux drivers (Debian Jessie kernel >>> 3.16.0-4) >>> Datum: Wed, 19 Nov 2014 10:28:06 +0800 >>> Von: tech <tech@dvbsky.net> >>> An: Christopher Scheuring <chris@anke-und-chris.de> >>> >>> >>> >>> Hello, >>> Could you report this problem to Antti Palosaari crope@iki.fi >>> <mailto:crope@iki.fi> and cc to linux-media@vger.kernel.org ? >>> Antti is the author/maintainer of M88DS3103 driver.Montage M88DS3103 >(SAT)* >>> Please list the compare result of the driver from DVBSky site and >>> Linuxtv.org. >>> Max from DVBSky also register linux-media mail list. >>> He will get your report and co-work with Antti to fix this issue of >>> M88DS3103 driver from Linuxtv.org. >>> BR, >>> tech >>> >------------------------------------------------------------------------ >>> *From:* Christopher Scheuring<chris@anke-und-chris.de >>> <mailto:chris@anke-und-chris.de>> >>> *Date:* 2014-11-19 04:42:10 >>> *To:* tech<tech@dvbsky.net <mailto:tech@dvbsky.net>> >>> *Cc:* <> >>> *Subject:* Re: Problems with Linux drivers (Debian Jessie kernel >>> 3.16.0-4) >>> Hello, >>> >>> with the drivers from linuxtv.org and the firmware provided by your >>> site, both cards work. >>> >>> But the DVBSky card (Montage M88DS3103) do now have a really bad >>> SNR!TT-Budget C-1501 works as expected. See the output of femon - the >>> signal of the DVBSky card was excellent with the drivers from you >>> site... Any idea, what could cause the problem? TV signal provided by >>> the DVBSky sometimes drops :-( >>> >>> xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a1 >>> *using '/dev/dvb/adapter1/frontend0'** >>> **FE: Montage M88DS3103 (SAT)* >>> status 1f | signal 585e | *snr 0096* | ber 00000000 | unc 00000000 | >>> FE_HAS_LOCK >>> status 1f | signal 585e | *snr 0096* | ber 00000000 | unc 00000000 | >>> FE_HAS_LOCK >>> >>> >>> xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a2 >>> *using '/dev/dvb/adapter2/frontend0'** >>> **FE: Montage M88DS3103 (SAT)* >>> status 1f | signal 6c07 | *snr 0096* | ber 00000000 | unc 00000000 | >>> FE_HAS_LOCK >>> status 1f | signal 6c07 | *snr 0096* | ber 00000000 | unc 00000000 | >>> FE_HAS_LOCK >>> >>> >>> xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a0 >>> *using '/dev/dvb/adapter0/frontend0'** >>> **FE: STV090x Multistandard (SAT)* >>> status 1f | signal a3d6 | *snr bccb* | ber 00000000 | unc 00000000 | >>> FE_HAS_LOCK >>> status 1f | signal a3d6 | *snr bd2e* | ber 00000000 | unc 00000000 | >>> FE_HAS_LOCK >>> >>> >>> Here the dmesg output of the loaded drivers and firmware of the DVBSky >>> Card: >>> >>> dmesg | egrep "cx23885|i2c|m88ds3103" >>> c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add >>> DVBSky T982(Dual DVB-T2/T/C) support >>> 9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x >>> device name i2c_devs array >>> c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add >>> DVBSky T982(Dual DVB-T2/T/C) support >>> 9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x >>> device name i2c_devs array >>> c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add >>> DVBSky T982(Dual DVB-T2/T/C) support >>> 9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x >>> device name i2c_devs array >>> [ 16.396426] cx23885 driver version 0.0.4 loaded >>> [ 16.396558] CORE cx23885[0]: subsystem: 4254:0952, board: DVBSky >S952 >>> [card=50,autodetected] >>> [ 16.838409] cx25840 4-0044: cx23885 A/V decoder found @ 0x88 >>> (cx23885[0]) >>> [ 16.909538] cx25840 4-0044: firmware: direct-loading firmware >>> v4l-cx23885-avcore-01.fw >>> [ 17.518086] cx25840 4-0044: loaded v4l-cx23885-avcore-01.fw firmware >>> (16382 bytes) >>> [ 17.533358] cx23885_dvb_register() allocating 1 frontend(s) >>> [ 17.533362] cx23885[0]: cx23885 based dvb card >>> [ 17.670143] i2c i2c-3: m88ds3103_attach: chip_id=70 >>> [ 17.672970] i2c i2c-3: Added multiplexed i2c bus 5 >>> [ 17.780353] DVB: registering new adapter (cx23885[0]) >>> [ 17.780357] cx23885 0000:04:00.0: DVB: registering adapter 1 >frontend >>> 0 (Montage M88DS3103)... >>> [ 17.807503] cx23885_dvb_register() allocating 1 frontend(s) >>> [ 17.807505] cx23885[0]: cx23885 based dvb card >>> [ 17.807987] i2c i2c-2: m88ds3103_attach: chip_id=70 >>> [ 17.810783] i2c i2c-2: Added multiplexed i2c bus 6 >>> [ 17.866021] DVB: registering new adapter (cx23885[0]) >>> [ 17.866025] cx23885 0000:04:00.0: DVB: registering adapter 2 >frontend >>> 0 (Montage M88DS3103)... >>> [ 17.893182] cx23885_dev_checkrevision() Hardware revision = 0xa5 >>> [ 17.893187] cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 19, >>> latency: 0, mmio: 0xfda00000 >>> [ 51.512292] i2c i2c-3: m88ds3103: found a 'Montage M88DS3103' in >cold >>> state >>> [ 51.818948] cx23885 0000:04:00.0: firmware: direct-loading firmware >>> dvb-demod-m88ds3103.fw >>> [ 51.818958] i2c i2c-3: m88ds3103: downloading firmware from file >>> 'dvb-demod-m88ds3103.fw' >>> [ 52.720270] i2c i2c-3: m88ds3103: found a 'Montage M88DS3103' in >warm >>> state >>> [ 52.720276] i2c i2c-3: m88ds3103: firmware version 3.B >>> [ 52.734588] i2c i2c-2: m88ds3103: found a 'Montage M88DS3103' in >cold >>> state >>> [ 52.734618] cx23885 0000:04:00.0: firmware: direct-loading firmware >>> dvb-demod-m88ds3103.fw >>> [ 52.734621] i2c i2c-2: m88ds3103: downloading firmware from file >>> 'dvb-demod-m88ds3103.fw' >>> [ 53.636110] i2c i2c-2: m88ds3103: found a 'Montage M88DS3103' in >warm >>> state >>> [ 53.636115] i2c i2c-2: m88ds3103: firmware version 3.B >>> >>> >>> Thanks a lot for your help. >>> >>> Regards, >>> Chris >>> >>> >>> >>> Am 18.11.2014 um 03:27 schrieb tech: >>>> Hello, >>>> Could you get the media code from linuxtv.org? >>>> and build this driver and install. >>>> http://git.linuxtv.org/cgit.cgi/media_build.git/about/ >>>> BR, >>>> tech >>>> >------------------------------------------------------------------------ >>>> *From:* Christopher Scheuring<chris@anke-und-chris.de >>>> <mailto:chris@anke-und-chris.de>> >>>> *Date:* 2014-11-18 06:07:27 >>>> *To:* tech<tech@dvbsky.net <mailto:tech@dvbsky.net>> >>>> *Cc:* <> >>>> *Subject:* Problems with Linux drivers (Debian Jessie kernel 3.16.0-4) >>>> Hi, >>>> >>>> I reinstalled after updating my system with the Linux drivers for the >>>> dvbsky cards provided by your site (media_build-bst-14-141106). >>>> >>>> Compiling with the build_x64.sh script was successfully and I could >>>> install the needed drivers via make install. After that the Conexant >>>> Systems CX23885 (DVBSKY S952) card works perfectly. >>>> >>>> Unfortunately after installing the drivers my Philips Semiconductors >>>> SAA7146 (TT-Budget C-1501) card doesn't runs anymore - the card worked >>>> perfectly before installing the provided drivers from your page! >>>> >>>> If got following error message in the kernel-log: >>>> [ 14.916814] budget_core: disagrees about version of symbol >>>> dvb_dmxdev_init >>>> [ 14.916819] budget_core: Unknown symbol dvb_dmxdev_init (err -22) >>>> [ 14.916827] budget_core: disagrees about version of symbol >>>> saa7146_wait_for_debi_done >>>> [ 14.916829] budget_core: Unknown symbol saa7146_wait_for_debi_done >>>> (err -22) >>>> [ 14.916832] budget_core: disagrees about version of symbol >>>> saa7146_i2c_adapter_prepare >>>> [ 14.916833] budget_core: Unknown symbol saa7146_i2c_adapter_prepare >>>> (err -22) >>>> [ 14.916840] budget_core: disagrees about version of symbol >>>> dvb_register_adapter >>>> [ 14.916841] budget_core: Unknown symbol dvb_register_adapter (err >>>> -22) >>>> [ 14.916846] budget_core: disagrees about version of symbol >>>> dvb_dmx_swfilter_packets >>>> [ 14.916848] budget_core: Unknown symbol dvb_dmx_swfilter_packets >>>> (err -22) >>>> [ 14.916862] budget_core: disagrees about version of symbol >>>> dvb_dmx_release >>>> [ 14.916864] budget_core: Unknown symbol dvb_dmx_release (err -22) >>>> [ 14.916869] budget_core: disagrees about version of symbol >>>> dvb_net_init >>>> [ 14.916871] budget_core: Unknown symbol dvb_net_init (err -22) >>>> [ 14.916875] budget_core: disagrees about version of symbol >>>> dvb_dmxdev_release >>>> [ 14.916877] budget_core: Unknown symbol dvb_dmxdev_release (err >-22) >>>> [ 14.916890] budget_core: disagrees about version of symbol >>>> dvb_net_release >>>> [ 14.916892] budget_core: Unknown symbol dvb_net_release (err -22) >>>> [ 14.916896] budget_core: disagrees about version of symbol >>>> saa7146_setgpio >>>> [ 14.916897] budget_core: Unknown symbol saa7146_setgpio (err -22) >>>> [ 14.916902] budget_core: disagrees about version of symbol >>>> dvb_unregister_adapter >>>> [ 14.916904] budget_core: Unknown symbol dvb_unregister_adapter (err >>>> -22) >>>> [ 14.916907] budget_core: disagrees about version of symbol >>>> dvb_dmx_init >>>> [ 14.916908] budget_core: Unknown symbol dvb_dmx_init (err -22) >>>> >>>> >>>> >>>> I think something went wrong with the provided driver packes or some >>>> drivers where overwritten, and some necessary not... I couldn't found >>>> any solution in the internet. >>>> >>>> Here my relevant system-infos: >>>> Linux XXX 3.16.0-4-amd64 #1 SMP Debian 3.16.7-2 (2014-11-06) x86_64 >>>> GNU/Linux >>>> >>>> The needed kernel header files 3.16.0-4-amd64 are installed. >>>> >>>> lsmod | grep dvb >>>> rc_dvbsky 12399 0 >>>> dvbsky_m88ds3103 25614 2 >>>> videobuf_dvb 12762 1 cx23885 >>>> videobuf_core 21832 3 videobuf_dma_sg,cx23885,videobuf_dvb >>>> dvb_core 102010 3 cx23885,altera_ci,videobuf_dvb >>>> i2c_core 46012 11 >>>> >drm,i2c_i801,cx23885,cx25840,dvbsky_m88ds3103,nvidia,v4l2_common,tveeprom,ttpci_eeprom,tda18271,videodev >>>> rc_core 22404 13 >>>> >ir_sharp_decoder,lirc_dev,cx23885,ir_lirc_codec,ir_rc5_decoder,ir_nec_decoder,ir_sony_decoder,rc_dvbsky,ir_mce_kbd_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_sanyo_decoder >>>> >>>> >>>> >>>> Could you provide me any help for a solution getting the SAA7146 >>>> (TT-Budget C-1501) card working again with the kernel 3.16.0-4? With >>>> the kernel 3.2.0-4-amd64 (with Debian wheezy) and the drivers >>>> media_build-bst-13-140526 I didn't had the problems... everything >>>> worked fine. Downgrading is no solution :-) >>>> >>>> Attached the complete dmesg protocol. >>>> >>>> >>>> Thanks a lot! >>>> >>>> Regards, >>>> Chris >>>> >>> >>> >>> > >-- >Christopher Scheuring *** chris@anke-und-chris.de >-- >To unsubscribe from this list: send the line "unsubscribe linux-media" in >the body of a message to majordomo@vger.kernel.org >More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Re: Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel3.16.0-4) 2014-11-21 2:30 ` Re: Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel3.16.0-4) Nibble Max @ 2014-12-16 12:45 ` Christopher Scheuring 0 siblings, 0 replies; 5+ messages in thread From: Christopher Scheuring @ 2014-12-16 12:45 UTC (permalink / raw) To: Nibble Max; +Cc: linux-media, Antti Palosaari Hello Max, sorry for the delayed answer - I'm currently busy. About your question where I have the issues: It concerns to all transponders using dvb-s or dvb-s2. Currently I have no chance for testing. Around Christmas I'll have some more time for testing. I'll check out the current drivers and play around with the firmeware versions. Hope to provide after testing more useful information. Best Regards, Chris On Fri, 21 Nov 2014 10:30:35 +0800, "Nibble Max" <nibble.max@gmail.com> wrote: > Hello Chris, > > Do all of your transponders have such issue or only some special > transponders? > Could you list the parameters for them? for example, dvb-s or dvb-s2 type, > frequency, symbol rate. > > The dvbsky.net firmware "dvb-fe-ds3103.fw" is version 3.7. > Annti uses the firmware "dvb-demod-m88ds3103.fw", which is version 3.B. > But we test both firmwares work well. You can change one to the other's > file name for check. > > Best Regards, > Max > > On 2014-11-20 20:56:07, Christopher Scheuring <chris@anke-und-chris.de> > wrote: >>Hello, >> >>I yust checked the SNR Level the DVBSky-Card providing with the >>drivers from dvbsky.net (media_build-bst-14-141106): >> >># ./femon -a 0 >>using '/dev/dvb/adapter0/frontend0' >>FE: Montage DS3103/TS2022 (SAT) >>status 1f | signal 7323 | snr b064 | ber 00000000 | unc 00000000 | >>FE_HAS_LOCK >> >># ./femon -a 1 >>using '/dev/dvb/adapter1/frontend0' >>FE: Montage DS3103/TS2022 (SAT) >>status 1f | signal 7a71 | snr 2a17 | ber 00000000 | unc 00000000 | >>FE_HAS_LOCK >> >> >>Looks "better" than with driver from linuxtv.org via git. And I >>don't have any sync problems or video / audio drops. >> >> >>I currently determined following: >>* Using the drivers from dvbsky.net the card is "Montage DS3103/TS2022" >> => Loading FW dvb-fe-ds3103.fw >>* With the drivers from linuxtv.org the card is "Montage M88DS3103" >> => Loading FW dvb-demod-m88ds3103.fw >> >> >>I'm a bit confused... perhaps if I use the linuxtv.org drivers, the >>card is recognized wrong and that's the problem? >> >> >>Regards, >>Chris >> >> >>On Thu, 20 Nov 2014 09:01:23 +0200, Antti Palosaari <crope@iki.fi> wrote: >>> Moikka >>> According to logs, everything seems to be fine. You could not compare >>> statistics numbers between two drivers. SNR 0096 is 150DEC, which means >>> 15dB, IIRC it was max chip could return for DVB-S. >>> >>> No idea about sync etc. problems, are you sure about those? I am pretty >>> sure it works rather well as I haven't got bug reports from PCTV 461e >>> users which has that same demod + tuner. >>> >>> regards >>> Antti >>> >>> >>> >>> On 11/19/2014 09:28 PM, Christopher Scheuring wrote: >>>> Hello Antti, >>>> >>>> the guys from tech@dvbsky.net told me to contact you because of my >>>> problems with the drivers for my DVBSKY S952. >>>> >>>> I attached the whole conversation. Currently the main problem is if i >>>> use the current drivers via >>>> git(http://git.linuxtv.org/cgit.cgi/media_build.git/about/) my single >>>> TT-Budget card works fine. But the signal from the DVDBSky S952 is very >>>> worse: Sync problems, bad SNR, drops on video and audio... If I use the >>>> driver dvbsky.net provides (media_build-bst-14-141106), the signal on >>>> booth tuners is fine - but then my TT-Budget doesn't works anymore (see >>>> end of this mail aka starting the conversation with tech@dvbsky.net). >>>> >>>> Do you have any ideas, how I could fix this problem? Before I updated >>my >>>> system (from Debian Wheezy with Kernel 3.2.0-4-amd64 everything was >>fine >>>> with both cards. >>>> >>>> >>>> If you need more detailed information, please let me know, so I could >>>> provide them as soon as possible, >>>> >>>> Thanks a lot and best wishes >>>> Chris >>>> >>>> >>>> -------- Weitergeleitete Nachricht -------- >>>> Betreff: Re: Re: Problems with Linux drivers (Debian Jessie kernel >>>> 3.16.0-4) >>>> Datum: Wed, 19 Nov 2014 10:28:06 +0800 >>>> Von: tech <tech@dvbsky.net> >>>> An: Christopher Scheuring <chris@anke-und-chris.de> >>>> >>>> >>>> >>>> Hello, >>>> Could you report this problem to Antti Palosaari crope@iki.fi >>>> <mailto:crope@iki.fi> and cc to linux-media@vger.kernel.org ? >>>> Antti is the author/maintainer of M88DS3103 driver.Montage M88DS3103 >>(SAT)* >>>> Please list the compare result of the driver from DVBSky site and >>>> Linuxtv.org. >>>> Max from DVBSky also register linux-media mail list. >>>> He will get your report and co-work with Antti to fix this issue of >>>> M88DS3103 driver from Linuxtv.org. >>>> BR, >>>> tech >>>> >>------------------------------------------------------------------------ >>>> *From:* Christopher Scheuring<chris@anke-und-chris.de >>>> <mailto:chris@anke-und-chris.de>> >>>> *Date:* 2014-11-19 04:42:10 >>>> *To:* tech<tech@dvbsky.net <mailto:tech@dvbsky.net>> >>>> *Cc:* <> >>>> *Subject:* Re: Problems with Linux drivers (Debian Jessie kernel >>>> 3.16.0-4) >>>> Hello, >>>> >>>> with the drivers from linuxtv.org and the firmware provided by your >>>> site, both cards work. >>>> >>>> But the DVBSky card (Montage M88DS3103) do now have a really bad >>>> SNR!TT-Budget C-1501 works as expected. See the output of femon - the >>>> signal of the DVBSky card was excellent with the drivers from you >>>> site... Any idea, what could cause the problem? TV signal provided by >>>> the DVBSky sometimes drops :-( >>>> >>>> xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a1 >>>> *using '/dev/dvb/adapter1/frontend0'** >>>> **FE: Montage M88DS3103 (SAT)* >>>> status 1f | signal 585e | *snr 0096* | ber 00000000 | unc 00000000 | >>>> FE_HAS_LOCK >>>> status 1f | signal 585e | *snr 0096* | ber 00000000 | unc 00000000 | >>>> FE_HAS_LOCK >>>> >>>> >>>> xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a2 >>>> *using '/dev/dvb/adapter2/frontend0'** >>>> **FE: Montage M88DS3103 (SAT)* >>>> status 1f | signal 6c07 | *snr 0096* | ber 00000000 | unc 00000000 | >>>> FE_HAS_LOCK >>>> status 1f | signal 6c07 | *snr 0096* | ber 00000000 | unc 00000000 | >>>> FE_HAS_LOCK >>>> >>>> >>>> xxx@xxx:~/VDR/linuxtv-dvb-apps-1.1.1/util/szap$ ./femon -a0 >>>> *using '/dev/dvb/adapter0/frontend0'** >>>> **FE: STV090x Multistandard (SAT)* >>>> status 1f | signal a3d6 | *snr bccb* | ber 00000000 | unc 00000000 | >>>> FE_HAS_LOCK >>>> status 1f | signal a3d6 | *snr bd2e* | ber 00000000 | unc 00000000 | >>>> FE_HAS_LOCK >>>> >>>> >>>> Here the dmesg output of the loaded drivers and firmware of the DVBSky >>>> Card: >>>> >>>> dmesg | egrep "cx23885|i2c|m88ds3103" >>>> c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add >>>> DVBSky T982(Dual DVB-T2/T/C) support >>>> 9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x >>>> device name i2c_devs array >>>> c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add >>>> DVBSky T982(Dual DVB-T2/T/C) support >>>> 9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x >>>> device name i2c_devs array >>>> c02ef64aab828d80040b5dce934729312e698c33 [media] cx23885: add >>>> DVBSky T982(Dual DVB-T2/T/C) support >>>> 9aa785b1500a7bd40b736f31b341e204bd5fb174 [media] add lgdt330x >>>> device name i2c_devs array >>>> [ 16.396426] cx23885 driver version 0.0.4 loaded >>>> [ 16.396558] CORE cx23885[0]: subsystem: 4254:0952, board: DVBSky >>S952 >>>> [card=50,autodetected] >>>> [ 16.838409] cx25840 4-0044: cx23885 A/V decoder found @ 0x88 >>>> (cx23885[0]) >>>> [ 16.909538] cx25840 4-0044: firmware: direct-loading firmware >>>> v4l-cx23885-avcore-01.fw >>>> [ 17.518086] cx25840 4-0044: loaded v4l-cx23885-avcore-01.fw firmware >>>> (16382 bytes) >>>> [ 17.533358] cx23885_dvb_register() allocating 1 frontend(s) >>>> [ 17.533362] cx23885[0]: cx23885 based dvb card >>>> [ 17.670143] i2c i2c-3: m88ds3103_attach: chip_id=70 >>>> [ 17.672970] i2c i2c-3: Added multiplexed i2c bus 5 >>>> [ 17.780353] DVB: registering new adapter (cx23885[0]) >>>> [ 17.780357] cx23885 0000:04:00.0: DVB: registering adapter 1 >>frontend >>>> 0 (Montage M88DS3103)... >>>> [ 17.807503] cx23885_dvb_register() allocating 1 frontend(s) >>>> [ 17.807505] cx23885[0]: cx23885 based dvb card >>>> [ 17.807987] i2c i2c-2: m88ds3103_attach: chip_id=70 >>>> [ 17.810783] i2c i2c-2: Added multiplexed i2c bus 6 >>>> [ 17.866021] DVB: registering new adapter (cx23885[0]) >>>> [ 17.866025] cx23885 0000:04:00.0: DVB: registering adapter 2 >>frontend >>>> 0 (Montage M88DS3103)... >>>> [ 17.893182] cx23885_dev_checkrevision() Hardware revision = 0xa5 >>>> [ 17.893187] cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 19, >>>> latency: 0, mmio: 0xfda00000 >>>> [ 51.512292] i2c i2c-3: m88ds3103: found a 'Montage M88DS3103' in >>cold >>>> state >>>> [ 51.818948] cx23885 0000:04:00.0: firmware: direct-loading firmware >>>> dvb-demod-m88ds3103.fw >>>> [ 51.818958] i2c i2c-3: m88ds3103: downloading firmware from file >>>> 'dvb-demod-m88ds3103.fw' >>>> [ 52.720270] i2c i2c-3: m88ds3103: found a 'Montage M88DS3103' in >>warm >>>> state >>>> [ 52.720276] i2c i2c-3: m88ds3103: firmware version 3.B >>>> [ 52.734588] i2c i2c-2: m88ds3103: found a 'Montage M88DS3103' in >>cold >>>> state >>>> [ 52.734618] cx23885 0000:04:00.0: firmware: direct-loading firmware >>>> dvb-demod-m88ds3103.fw >>>> [ 52.734621] i2c i2c-2: m88ds3103: downloading firmware from file >>>> 'dvb-demod-m88ds3103.fw' >>>> [ 53.636110] i2c i2c-2: m88ds3103: found a 'Montage M88DS3103' in >>warm >>>> state >>>> [ 53.636115] i2c i2c-2: m88ds3103: firmware version 3.B >>>> >>>> >>>> Thanks a lot for your help. >>>> >>>> Regards, >>>> Chris >>>> >>>> >>>> >>>> Am 18.11.2014 um 03:27 schrieb tech: >>>>> Hello, >>>>> Could you get the media code from linuxtv.org? >>>>> and build this driver and install. >>>>> http://git.linuxtv.org/cgit.cgi/media_build.git/about/ >>>>> BR, >>>>> tech >>>>> >>------------------------------------------------------------------------ >>>>> *From:* Christopher Scheuring<chris@anke-und-chris.de >>>>> <mailto:chris@anke-und-chris.de>> >>>>> *Date:* 2014-11-18 06:07:27 >>>>> *To:* tech<tech@dvbsky.net <mailto:tech@dvbsky.net>> >>>>> *Cc:* <> >>>>> *Subject:* Problems with Linux drivers (Debian Jessie kernel 3.16.0-4) >>>>> Hi, >>>>> >>>>> I reinstalled after updating my system with the Linux drivers for the >>>>> dvbsky cards provided by your site (media_build-bst-14-141106). >>>>> >>>>> Compiling with the build_x64.sh script was successfully and I could >>>>> install the needed drivers via make install. After that the Conexant >>>>> Systems CX23885 (DVBSKY S952) card works perfectly. >>>>> >>>>> Unfortunately after installing the drivers my Philips Semiconductors >>>>> SAA7146 (TT-Budget C-1501) card doesn't runs anymore - the card worked >>>>> perfectly before installing the provided drivers from your page! >>>>> >>>>> If got following error message in the kernel-log: >>>>> [ 14.916814] budget_core: disagrees about version of symbol >>>>> dvb_dmxdev_init >>>>> [ 14.916819] budget_core: Unknown symbol dvb_dmxdev_init (err -22) >>>>> [ 14.916827] budget_core: disagrees about version of symbol >>>>> saa7146_wait_for_debi_done >>>>> [ 14.916829] budget_core: Unknown symbol saa7146_wait_for_debi_done >>>>> (err -22) >>>>> [ 14.916832] budget_core: disagrees about version of symbol >>>>> saa7146_i2c_adapter_prepare >>>>> [ 14.916833] budget_core: Unknown symbol saa7146_i2c_adapter_prepare >>>>> (err -22) >>>>> [ 14.916840] budget_core: disagrees about version of symbol >>>>> dvb_register_adapter >>>>> [ 14.916841] budget_core: Unknown symbol dvb_register_adapter (err >>>>> -22) >>>>> [ 14.916846] budget_core: disagrees about version of symbol >>>>> dvb_dmx_swfilter_packets >>>>> [ 14.916848] budget_core: Unknown symbol dvb_dmx_swfilter_packets >>>>> (err -22) >>>>> [ 14.916862] budget_core: disagrees about version of symbol >>>>> dvb_dmx_release >>>>> [ 14.916864] budget_core: Unknown symbol dvb_dmx_release (err -22) >>>>> [ 14.916869] budget_core: disagrees about version of symbol >>>>> dvb_net_init >>>>> [ 14.916871] budget_core: Unknown symbol dvb_net_init (err -22) >>>>> [ 14.916875] budget_core: disagrees about version of symbol >>>>> dvb_dmxdev_release >>>>> [ 14.916877] budget_core: Unknown symbol dvb_dmxdev_release (err >>-22) >>>>> [ 14.916890] budget_core: disagrees about version of symbol >>>>> dvb_net_release >>>>> [ 14.916892] budget_core: Unknown symbol dvb_net_release (err -22) >>>>> [ 14.916896] budget_core: disagrees about version of symbol >>>>> saa7146_setgpio >>>>> [ 14.916897] budget_core: Unknown symbol saa7146_setgpio (err -22) >>>>> [ 14.916902] budget_core: disagrees about version of symbol >>>>> dvb_unregister_adapter >>>>> [ 14.916904] budget_core: Unknown symbol dvb_unregister_adapter (err >>>>> -22) >>>>> [ 14.916907] budget_core: disagrees about version of symbol >>>>> dvb_dmx_init >>>>> [ 14.916908] budget_core: Unknown symbol dvb_dmx_init (err -22) >>>>> >>>>> >>>>> >>>>> I think something went wrong with the provided driver packes or some >>>>> drivers where overwritten, and some necessary not... I couldn't found >>>>> any solution in the internet. >>>>> >>>>> Here my relevant system-infos: >>>>> Linux XXX 3.16.0-4-amd64 #1 SMP Debian 3.16.7-2 (2014-11-06) x86_64 >>>>> GNU/Linux >>>>> >>>>> The needed kernel header files 3.16.0-4-amd64 are installed. >>>>> >>>>> lsmod | grep dvb >>>>> rc_dvbsky 12399 0 >>>>> dvbsky_m88ds3103 25614 2 >>>>> videobuf_dvb 12762 1 cx23885 >>>>> videobuf_core 21832 3 videobuf_dma_sg,cx23885,videobuf_dvb >>>>> dvb_core 102010 3 cx23885,altera_ci,videobuf_dvb >>>>> i2c_core 46012 11 >>>>> >>drm,i2c_i801,cx23885,cx25840,dvbsky_m88ds3103,nvidia,v4l2_common,tveeprom,ttpci_eeprom,tda18271,videodev >>>>> rc_core 22404 13 >>>>> >>ir_sharp_decoder,lirc_dev,cx23885,ir_lirc_codec,ir_rc5_decoder,ir_nec_decoder,ir_sony_decoder,rc_dvbsky,ir_mce_kbd_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_sanyo_decoder >>>>> >>>>> >>>>> >>>>> Could you provide me any help for a solution getting the SAA7146 >>>>> (TT-Budget C-1501) card working again with the kernel 3.16.0-4? With >>>>> the kernel 3.2.0-4-amd64 (with Debian wheezy) and the drivers >>>>> media_build-bst-13-140526 I didn't had the problems... everything >>>>> worked fine. Downgrading is no solution :-) >>>>> >>>>> Attached the complete dmesg protocol. >>>>> >>>>> >>>>> Thanks a lot! >>>>> >>>>> Regards, >>>>> Chris >>>>> >>>> >>>> >>>> >> >>-- >>Christopher Scheuring *** chris@anke-und-chris.de >>-- >>To unsubscribe from this list: send the line "unsubscribe linux-media" in >>the body of a message to majordomo@vger.kernel.org >>More majordomo info at http://vger.kernel.org/majordomo-info.html -- Christopher Scheuring *** chris@anke-und-chris.de ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-12-16 12:45 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <201411191028007188819@dvbsky.net>
[not found] ` <546CEF67.9060803@anke-und-chris.de>
2014-11-19 19:55 ` Fwd: Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel 3.16.0-4) Christopher Scheuring
2014-11-20 7:01 ` Antti Palosaari
2014-11-20 12:53 ` Christopher Scheuring
2014-11-21 2:30 ` Re: Fwd: Re: Re: Problems with Linux drivers (Debian Jessie kernel3.16.0-4) Nibble Max
2014-12-16 12:45 ` Christopher Scheuring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).