From: Hans Verkuil <hverkuil@xs4all.nl>
To: Linux Media Mailing List <linux-media@vger.kernel.org>
Cc: Mariusz Bialonczyk <manio@skyboo.net>
Subject: Re: [PATCH for v3.18] media: use sg = sg_next(sg) instead of sg++
Date: Fri, 21 Nov 2014 11:05:15 +0100 [thread overview]
Message-ID: <546F0E5B.80600@xs4all.nl> (raw)
In-Reply-To: <546F03F8.9000301@xs4all.nl>
Mariusz,
Thanks for reporting and testing this so quickly!
On 11/21/2014 10:20 AM, Hans Verkuil wrote:
> Several drivers (mostly copy-and-paste) still used sg++ instead of
> sg = sg_next(sg). Fix them since sg++ won't work if contiguous scatter
> entries where combined into one larger entry.
>
> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Mariusz Bialonczyk <manio@skyboo.net>
Tested-by: Mariusz Bialonczyk <manio@skyboo.net>
Regards,
Hans
> Cc: stable@vger.kernel.org # for v3.7 and up
> ---
> drivers/media/pci/bt8xx/bttv-risc.c | 12 ++++++------
> drivers/media/pci/cx23885/cx23885-core.c | 6 +++---
> drivers/media/pci/cx25821/cx25821-core.c | 12 ++++++------
> drivers/media/pci/cx88/cx88-core.c | 6 +++---
> drivers/media/pci/ivtv/ivtv-udma.c | 2 +-
> 5 files changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/media/pci/bt8xx/bttv-risc.c b/drivers/media/pci/bt8xx/bttv-risc.c
> index 82cc47d..4d3f05a 100644
> --- a/drivers/media/pci/bt8xx/bttv-risc.c
> +++ b/drivers/media/pci/bt8xx/bttv-risc.c
> @@ -84,7 +84,7 @@ bttv_risc_packed(struct bttv *btv, struct btcx_riscmem *risc,
> continue;
> while (offset && offset >= sg_dma_len(sg)) {
> offset -= sg_dma_len(sg);
> - sg++;
> + sg = sg_next(sg);
> }
> if (bpl <= sg_dma_len(sg)-offset) {
> /* fits into current chunk */
> @@ -100,13 +100,13 @@ bttv_risc_packed(struct bttv *btv, struct btcx_riscmem *risc,
> *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset);
> todo -= (sg_dma_len(sg)-offset);
> offset = 0;
> - sg++;
> + sg = sg_next(sg);
> while (todo > sg_dma_len(sg)) {
> *(rp++)=cpu_to_le32(BT848_RISC_WRITE|
> sg_dma_len(sg));
> *(rp++)=cpu_to_le32(sg_dma_address(sg));
> todo -= sg_dma_len(sg);
> - sg++;
> + sg = sg_next(sg);
> }
> *(rp++)=cpu_to_le32(BT848_RISC_WRITE|BT848_RISC_EOL|
> todo);
> @@ -187,15 +187,15 @@ bttv_risc_planar(struct bttv *btv, struct btcx_riscmem *risc,
> /* go to next sg entry if needed */
> while (yoffset && yoffset >= sg_dma_len(ysg)) {
> yoffset -= sg_dma_len(ysg);
> - ysg++;
> + ysg = sg_next(ysg);
> }
> while (uoffset && uoffset >= sg_dma_len(usg)) {
> uoffset -= sg_dma_len(usg);
> - usg++;
> + usg = sg_next(usg);
> }
> while (voffset && voffset >= sg_dma_len(vsg)) {
> voffset -= sg_dma_len(vsg);
> - vsg++;
> + vsg = sg_next(vsg);
> }
>
> /* calculate max number of bytes we can write */
> diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c
> index 331edda..3bd386c 100644
> --- a/drivers/media/pci/cx23885/cx23885-core.c
> +++ b/drivers/media/pci/cx23885/cx23885-core.c
> @@ -1078,7 +1078,7 @@ static __le32 *cx23885_risc_field(__le32 *rp, struct scatterlist *sglist,
> for (line = 0; line < lines; line++) {
> while (offset && offset >= sg_dma_len(sg)) {
> offset -= sg_dma_len(sg);
> - sg++;
> + sg = sg_next(sg);
> }
>
> if (lpi && line > 0 && !(line % lpi))
> @@ -1101,14 +1101,14 @@ static __le32 *cx23885_risc_field(__le32 *rp, struct scatterlist *sglist,
> *(rp++) = cpu_to_le32(0); /* bits 63-32 */
> todo -= (sg_dma_len(sg)-offset);
> offset = 0;
> - sg++;
> + sg = sg_next(sg);
> while (todo > sg_dma_len(sg)) {
> *(rp++) = cpu_to_le32(RISC_WRITE|
> sg_dma_len(sg));
> *(rp++) = cpu_to_le32(sg_dma_address(sg));
> *(rp++) = cpu_to_le32(0); /* bits 63-32 */
> todo -= sg_dma_len(sg);
> - sg++;
> + sg = sg_next(sg);
> }
> *(rp++) = cpu_to_le32(RISC_WRITE|RISC_EOL|todo);
> *(rp++) = cpu_to_le32(sg_dma_address(sg));
> diff --git a/drivers/media/pci/cx25821/cx25821-core.c b/drivers/media/pci/cx25821/cx25821-core.c
> index e81173c..389fffd 100644
> --- a/drivers/media/pci/cx25821/cx25821-core.c
> +++ b/drivers/media/pci/cx25821/cx25821-core.c
> @@ -996,7 +996,7 @@ static __le32 *cx25821_risc_field(__le32 * rp, struct scatterlist *sglist,
> for (line = 0; line < lines; line++) {
> while (offset && offset >= sg_dma_len(sg)) {
> offset -= sg_dma_len(sg);
> - sg++;
> + sg = sg_next(sg);
> }
> if (bpl <= sg_dma_len(sg) - offset) {
> /* fits into current chunk */
> @@ -1014,14 +1014,14 @@ static __le32 *cx25821_risc_field(__le32 * rp, struct scatterlist *sglist,
> *(rp++) = cpu_to_le32(0); /* bits 63-32 */
> todo -= (sg_dma_len(sg) - offset);
> offset = 0;
> - sg++;
> + sg = sg_next(sg);
> while (todo > sg_dma_len(sg)) {
> *(rp++) = cpu_to_le32(RISC_WRITE |
> sg_dma_len(sg));
> *(rp++) = cpu_to_le32(sg_dma_address(sg));
> *(rp++) = cpu_to_le32(0); /* bits 63-32 */
> todo -= sg_dma_len(sg);
> - sg++;
> + sg = sg_next(sg);
> }
> *(rp++) = cpu_to_le32(RISC_WRITE | RISC_EOL | todo);
> *(rp++) = cpu_to_le32(sg_dma_address(sg));
> @@ -1101,7 +1101,7 @@ static __le32 *cx25821_risc_field_audio(__le32 * rp, struct scatterlist *sglist,
> for (line = 0; line < lines; line++) {
> while (offset && offset >= sg_dma_len(sg)) {
> offset -= sg_dma_len(sg);
> - sg++;
> + sg = sg_next(sg);
> }
>
> if (lpi && line > 0 && !(line % lpi))
> @@ -1125,14 +1125,14 @@ static __le32 *cx25821_risc_field_audio(__le32 * rp, struct scatterlist *sglist,
> *(rp++) = cpu_to_le32(0); /* bits 63-32 */
> todo -= (sg_dma_len(sg) - offset);
> offset = 0;
> - sg++;
> + sg = sg_next(sg);
> while (todo > sg_dma_len(sg)) {
> *(rp++) = cpu_to_le32(RISC_WRITE |
> sg_dma_len(sg));
> *(rp++) = cpu_to_le32(sg_dma_address(sg));
> *(rp++) = cpu_to_le32(0); /* bits 63-32 */
> todo -= sg_dma_len(sg);
> - sg++;
> + sg = sg_next(sg);
> }
> *(rp++) = cpu_to_le32(RISC_WRITE | RISC_EOL | todo);
> *(rp++) = cpu_to_le32(sg_dma_address(sg));
> diff --git a/drivers/media/pci/cx88/cx88-core.c b/drivers/media/pci/cx88/cx88-core.c
> index 9fa4acb..dee177e 100644
> --- a/drivers/media/pci/cx88/cx88-core.c
> +++ b/drivers/media/pci/cx88/cx88-core.c
> @@ -95,7 +95,7 @@ static __le32* cx88_risc_field(__le32 *rp, struct scatterlist *sglist,
> for (line = 0; line < lines; line++) {
> while (offset && offset >= sg_dma_len(sg)) {
> offset -= sg_dma_len(sg);
> - sg++;
> + sg = sg_next(sg);
> }
> if (lpi && line>0 && !(line % lpi))
> sol = RISC_SOL | RISC_IRQ1 | RISC_CNT_INC;
> @@ -114,13 +114,13 @@ static __le32* cx88_risc_field(__le32 *rp, struct scatterlist *sglist,
> *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset);
> todo -= (sg_dma_len(sg)-offset);
> offset = 0;
> - sg++;
> + sg = sg_next(sg);
> while (todo > sg_dma_len(sg)) {
> *(rp++)=cpu_to_le32(RISC_WRITE|
> sg_dma_len(sg));
> *(rp++)=cpu_to_le32(sg_dma_address(sg));
> todo -= sg_dma_len(sg);
> - sg++;
> + sg = sg_next(sg);
> }
> *(rp++)=cpu_to_le32(RISC_WRITE|RISC_EOL|todo);
> *(rp++)=cpu_to_le32(sg_dma_address(sg));
> diff --git a/drivers/media/pci/ivtv/ivtv-udma.c b/drivers/media/pci/ivtv/ivtv-udma.c
> index 7338cb2..bee2329 100644
> --- a/drivers/media/pci/ivtv/ivtv-udma.c
> +++ b/drivers/media/pci/ivtv/ivtv-udma.c
> @@ -76,7 +76,7 @@ void ivtv_udma_fill_sg_array (struct ivtv_user_dma *dma, u32 buffer_offset, u32
> int i;
> struct scatterlist *sg;
>
> - for (i = 0, sg = dma->SGlist; i < dma->SG_length; i++, sg++) {
> + for (i = 0, sg = dma->SGlist; i < dma->SG_length; i++, sg = sg_next(sg)) {
> dma->SGarray[i].size = cpu_to_le32(sg_dma_len(sg));
> dma->SGarray[i].src = cpu_to_le32(sg_dma_address(sg));
> dma->SGarray[i].dst = cpu_to_le32(buffer_offset);
>
next prev parent reply other threads:[~2014-11-21 10:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-21 9:20 [PATCH for v3.18] media: use sg = sg_next(sg) instead of sg++ Hans Verkuil
2014-11-21 10:05 ` Hans Verkuil [this message]
2014-11-21 10:50 ` Hans Verkuil
2014-11-24 18:24 ` Mauro Carvalho Chehab
2014-11-24 18:37 ` Hans Verkuil
2014-11-24 18:51 ` Mauro Carvalho Chehab
2014-11-24 19:16 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=546F0E5B.80600@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
--cc=manio@skyboo.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox