From: Hans Verkuil <hverkuil@xs4all.nl>
To: Gregor Jasny <gjasny@googlemail.com>,
linux-media@vger.kernel.org,
Mauro Carvalho Chehab <m.chehab@samsung.com>,
Hans de Goede <hdegoede@redhat.com>
Subject: Re: v4l-utils stable release 1.6.1
Date: Fri, 21 Nov 2014 20:37:58 +0100 [thread overview]
Message-ID: <546F9496.9020207@xs4all.nl> (raw)
In-Reply-To: <546E093D.4030203@googlemail.com>
Hi Gregor,
On 11/20/2014 04:31 PM, Gregor Jasny wrote:
> Hello,
>
> do you consider something from these commits as important enough for a
> bugfix release?
>
> Thanks,
> Gregor
>
>> Akihiro Tsukada (9):
>> libdvbv5, dvbv5-scan: generalize channel duplication check
>> libdvbv5: add as many channels as possible in scanning DVB-T2
>> libdvbv5: wrong frequency in the output of satellite delsys scans
>> libdvbv5: add support for ISDB-S tuning
>> libdvbv5: add support for ISDB-S scanning
>> libdvbv5: add COUNTRY property
>> v4l-utils/libdvbv5: restore deleted functions to keep API/ABI compatible
>> v4l-utils/libdvbv5: fix memory leak in dvb_guess_user_country()
>> v4l-utils/libdvbv5: add gconv module for the text conversions of ISDB-S/T.
>>
>> Gregor Jasny (7):
>> Start v4l-utils 1.7.0 development cycle
>> man: remove duplicate backslash from NAME section
>> man: Use Unicode character for ellipsis and fall back to ...
>> man: add generated files to .gitignore
>> libdvbv5: Remove stray semicolon
>> v4l2-compliance: Explicitely link against rt library
>> v4l2-ctl: Explicitely link against rt library
>>
>> Hans Verkuil (10):
>> qv4l2/v4l2-ctl: fix buffer overrun in vivid-tpg.
This one should go in (critical bug fix).
>> v4l2-ctl: fix sliced vbi mode parsing
And this one.
>> v4l2-compliance: when streaming used at least 2 buffers.
>> v4l2-compliance: add initial checks for VIDIOC_QUERY_EXT_CTRL
>> v4l2-ctl: add support for U32 control type.
>> v4l2-ctl: fix array handling
And these two for v4l2-ctl.
Sorry for being late with replying.
Regards,
Hans
>> v4l2-compliance: allow the V4L2_IN_ST_NO_SYNC status flag.
>> qv4l2: add single step support
>> qv4l2: don't select alsa device for video output.
>> v4l2-compliance: select(): split "ret <= 0" test in two
>>
>> Hans de Goede (2):
>> rc_keymaps: allwinner: S/KEY_HOME/KEY_HOMEPAGE/
>> v4lconvert: Fix decoding of jpeg data with no vertical sub-sampling
>>
>> Mauro Carvalho Chehab (41):
>> libdvbv5: properly represent Satellite frequencies
>> README: better document the package
>> libdvbv5: Fix some Doxygen warnings at dvb-fe.h
>> Doxygen: Document libdvbv5 countries.h
>> configure.ac: Fix gconv compilation with 64 bits
>> parse_tcpdump_log.pl: only adjust direction for control EP
>> contrib: add a parser for af9035
>> parse_af9035.pl: properly handle URB errors
>> parse_af9035.pl: Add two other commands from ITE driver
>> parse_af9035.pl: add arguments to show timestamp and debug
>> parse_af9035.pl: group write/read URBs
>> parse_af9035.pl: create a routine to print send/race
>> parse_af9035.pl: print read/write as C lines
>> parse_af9035.pl: add support for firmware commands
>> parse_af9035.pl: fix firmware write size
>> ir-keytable: fix a regression introduced by fe2aa5f767eba
>> gen_keytables.pl: Fix a regression at RC map file generation
>> rc: Update the protocol name at RC6 tables
>> rc_maps.cfg: reorder entries alphabetically
>> rc: sync with Kernel
>> rc: copy userspace-only maps to a separate dir
>> README: Add the steps needed to syncronize with the Kernel tree
>> vivid-tpg.h.patch: update to match current upstream tree
>> Synchronize with the Kernel
>> parse_af9035.pl: proper handle when stack is not filled
>> parse_af9035.pl: add support for CMD_IR_GET
>> parse_af9035.pl: add options to hide part of the messages
>> parse_af9035.pl: Add firmware boot message to the parser
>> parse_af9035.pl: improve IR handling
>> parse_af9035.pl: add support for generic I2C read/write
>> parse_af9035.pl: better handle the read data
>> parse_af9035.pl: allow to hide parsing errors
>> parse_af9035.pl: add support for standard I2C commands
>> parse_af9035.pl: some cleanups
>> parse_af9035.pl: Fix decoding order at I2C read/write
>> parse_af9035.pl: Fix size on rd/wr regs prints
>> parse_af9035.pl: Fix some hide conditions
>> parse_af9035.pl: Improve argument handling
>> libdvbv5: add experimental DTMB support
>> parse_tcpdump_log.pl: simplify non-control data
>> parse_tcpdump_log.pl: remove some leftovers
>>
>> Niels Ole Salscheider (1):
>> qv4l2: Fix out-of-source build
>>
>> Patrick Boettcher (4):
>> parse_tcpdump_log.pl: skip filtered frames and remove them from pending
>> parse_tcpdump_log.pl: show transfer-direction for non-ctrl-transfers
>> parse_tcpdump_log.pl: add external frame_processor-option
>> parse_tcpdump_log.pl: remove --all option which was not documented and not working as expected
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2014-11-21 19:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-20 15:31 v4l-utils stable release 1.6.1 Gregor Jasny
2014-11-20 16:15 ` Mauro Carvalho Chehab
2014-11-20 20:22 ` Hans de Goede
2014-11-21 19:37 ` Hans Verkuil [this message]
2014-11-21 20:03 ` v4l-utils stable release 1.6.2 Gregor Jasny
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=546F9496.9020207@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=gjasny@googlemail.com \
--cc=hdegoede@redhat.com \
--cc=linux-media@vger.kernel.org \
--cc=m.chehab@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).