From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: linux-sunxi@googlegroups.com, paul.kocialkowski@bootlin.com
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
devel@driverdev.osuosl.org, linux-arm-kernel@lists.infradead.org,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Randy Li <ayaka@soulik.info>, Hans Verkuil <hverkuil@xs4all.nl>,
Ezequiel Garcia <ezequiel@collabora.com>,
Tomasz Figa <tfiga@chromium.org>,
Alexandre Courbot <acourbot@chromium.org>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: Re: [linux-sunxi] [PATCH v2 1/2] media: v4l: Add definitions for the HEVC slice format and controls
Date: Wed, 05 Dec 2018 21:59:38 +0100 [thread overview]
Message-ID: <5515174.7lFZcYkk85@jernej-laptop> (raw)
In-Reply-To: <20181123130209.11696-2-paul.kocialkowski@bootlin.com>
Hi!
Dne petek, 23. november 2018 ob 14:02:08 CET je Paul Kocialkowski napisal(a):
> This introduces the required definitions for HEVC decoding support with
> stateless VPUs. The controls associated to the HEVC slice format provide
> the required meta-data for decoding slices extracted from the bitstream.
>
> This interface comes with the following limitations:
> * No custom quantization matrices (scaling lists);
> * Support for a single temporal layer only;
> * No slice entry point offsets support;
> * No conformance window support;
> * No VUI parameters support;
> * No support for SPS extensions: range, multilayer, 3d, scc, 4 bits;
> * No support for PPS extensions: range, multilayer, 3d, scc, 4 bits.
>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> ---
<snip>
> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c
> b/drivers/media/v4l2-core/v4l2-ctrls.c index e96c453208e8..9af17815ecc3
> 100644
> --- a/drivers/media/v4l2-core/v4l2-ctrls.c
> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
> @@ -913,6 +913,9 @@ const char *v4l2_ctrl_get_name(u32 id)
> case V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD: return "HEVC Size of
> Length Field"; case V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES: return
> "Reference Frames for a P-Frame"; case
> V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR: return "Prepend SPS and PPS
to
> IDR"; + case V4L2_CID_MPEG_VIDEO_HEVC_SPS: return "HEVC Sequence
> Parameter Set"; + case V4L2_CID_MPEG_VIDEO_HEVC_PPS: return "HEVC
Picture
> Parameter Set"; + case V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS: return
"HEVC
> Slice Parameters";
>
> /* CAMERA controls */
> /* Keep the order of the 'case's the same as in v4l2-controls.h! */
> @@ -1320,6 +1323,15 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum
> v4l2_ctrl_type *type, case V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS:
> *type = V4L2_CTRL_TYPE_H264_DECODE_PARAMS;
> break;
> + case V4L2_CID_MPEG_VIDEO_HEVC_SPS:
> + *type = V4L2_CTRL_TYPE_HEVC_SPS;
> + break;
> + case V4L2_CID_MPEG_VIDEO_HEVC_PPS:
> + *type = V4L2_CTRL_TYPE_HEVC_PPS;
> + break;
> + case V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS:
> + *type = V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS;
> + break;
> default:
> *type = V4L2_CTRL_TYPE_INTEGER;
> break;
> @@ -1692,6 +1704,11 @@ static int std_validate(const struct v4l2_ctrl *ctrl,
> u32 idx, case V4L2_CTRL_TYPE_H264_DECODE_PARAMS:
> return 0;
>
> + case V4L2_CTRL_TYPE_HEVC_SPS:
> + case V4L2_CTRL_TYPE_HEVC_PPS:
> + case V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS:
> + return 0;
> +
> default:
> return -EINVAL;
> }
> @@ -2287,6 +2304,15 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct
> v4l2_ctrl_handler *hdl, case V4L2_CTRL_TYPE_H264_DECODE_PARAMS:
> elem_size = sizeof(struct v4l2_ctrl_h264_decode_param);
> break;
> + case V4L2_CTRL_TYPE_HEVC_SPS:
> + elem_size = sizeof(struct v4l2_ctrl_hevc_sps);
> + break;
> + case V4L2_CTRL_TYPE_HEVC_PPS:
> + elem_size = sizeof(struct v4l2_ctrl_hevc_pps);
> + break;
> + case V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS:
> + elem_size = sizeof(struct v4l2_ctrl_hevc_slice_params);
> + break;
> default:
> if (type < V4L2_CTRL_COMPOUND_TYPES)
> elem_size = sizeof(s32);
> diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c
> b/drivers/media/v4l2-core/v4l2-ioctl.c index aa63f1794272..7bec91c6effe
> 100644
> --- a/drivers/media/v4l2-core/v4l2-ioctl.c
> +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
> @@ -1321,6 +1321,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
> case V4L2_PIX_FMT_VP8: descr = "VP8"; break;
> case V4L2_PIX_FMT_VP9: descr = "VP9"; break;
> case V4L2_PIX_FMT_HEVC: descr = "HEVC"; break; /* aka H.265 */
> + case V4L2_PIX_FMT_HEVC_SLICE: descr = "HEVC Parsed Slice Data"; break;
> case V4L2_PIX_FMT_FWHT: descr = "FWHT"; break; /* used in vicodec */
> case V4L2_PIX_FMT_CPIA1: descr = "GSPCA CPiA YUV"; break;
> case V4L2_PIX_FMT_WNVA: descr = "WNVA"; break;
> diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
> index b4ca95710d2d..11664c5c3706 100644
> --- a/include/media/v4l2-ctrls.h
> +++ b/include/media/v4l2-ctrls.h
> @@ -48,6 +48,9 @@ struct poll_table_struct;
> * @p_h264_scal_mtrx: Pointer to a struct
v4l2_ctrl_h264_scaling_matrix.
> * @p_h264_slice_param: Pointer to a struct v4l2_ctrl_h264_slice_param.
> * @p_h264_decode_param: Pointer to a struct v4l2_ctrl_h264_decode_param.
> + * @p_hevc_sps: Pointer to an HEVC sequence parameter set structure.
> + * @p_hevc_pps: Pointer to an HEVC picture parameter set structure.
> + * @p_hevc_slice_params Pointer to an HEVC slice parameters structure.
> * @p: Pointer to a compound value.
> */
> union v4l2_ctrl_ptr {
> @@ -64,6 +67,9 @@ union v4l2_ctrl_ptr {
> struct v4l2_ctrl_h264_scaling_matrix *p_h264_scal_mtrx;
> struct v4l2_ctrl_h264_slice_param *p_h264_slice_param;
> struct v4l2_ctrl_h264_decode_param *p_h264_decode_param;
> + struct v4l2_ctrl_hevc_sps *p_hevc_sps;
> + struct v4l2_ctrl_hevc_pps *p_hevc_pps;
> + struct v4l2_ctrl_hevc_slice_params *p_hevc_slice_params;
> void *p;
> };
>
> diff --git a/include/uapi/linux/v4l2-controls.h
> b/include/uapi/linux/v4l2-controls.h index 628c0cdb51d9..5bbf63b2dad1
> 100644
> --- a/include/uapi/linux/v4l2-controls.h
> +++ b/include/uapi/linux/v4l2-controls.h
> @@ -709,6 +709,9 @@ enum v4l2_cid_mpeg_video_hevc_size_of_length_field {
> #define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_BR (V4L2_CID_MPEG_BASE +
> 642) #define V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES (V4L2_CID_MPEG_BASE
> + 643) #define
> V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR (V4L2_CID_MPEG_BASE + 644)
> +#define V4L2_CID_MPEG_VIDEO_HEVC_SPS (V4L2_CID_MPEG_BASE + 645)
+#define
> V4L2_CID_MPEG_VIDEO_HEVC_PPS (V4L2_CID_MPEG_BASE + 646) +#define
> V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (V4L2_CID_MPEG_BASE + 647)
>
> /* MPEG-class control IDs specific to the CX2341x driver as defined by
> V4L2 */ #define V4L2_CID_MPEG_CX2341X_BASE (V4L2_CTRL_CLASS_MPEG |
> 0x1000) @@ -1324,4 +1327,156 @@ struct v4l2_ctrl_h264_decode_param {
> struct v4l2_h264_dpb_entry dpb[16];
> };
>
> +#define V4L2_HEVC_SLICE_TYPE_B 0
> +#define V4L2_HEVC_SLICE_TYPE_P 1
> +#define V4L2_HEVC_SLICE_TYPE_I 2
> +
> +struct v4l2_ctrl_hevc_sps {
> + /* ISO/IEC 23008-2, ITU-T Rec. H.265: Sequence parameter set */
> + __u8 chroma_format_idc;
> + __u8 separate_colour_plane_flag;
> + __u16 pic_width_in_luma_samples;
> + __u16 pic_height_in_luma_samples;
> + __u8 bit_depth_luma_minus8;
> + __u8 bit_depth_chroma_minus8;
> + __u8 log2_max_pic_order_cnt_lsb_minus4;
> + __u8 sps_max_dec_pic_buffering_minus1;
> + __u8 sps_max_num_reorder_pics;
> + __u8 sps_max_latency_increase_plus1;
> + __u8 log2_min_luma_coding_block_size_minus3;
> + __u8 log2_diff_max_min_luma_coding_block_size;
> + __u8 log2_min_luma_transform_block_size_minus2;
> + __u8 log2_diff_max_min_luma_transform_block_size;
> + __u8 max_transform_hierarchy_depth_inter;
> + __u8 max_transform_hierarchy_depth_intra;
> + __u8 scaling_list_enabled_flag;
> + __u8 amp_enabled_flag;
> + __u8 sample_adaptive_offset_enabled_flag;
> + __u8 pcm_enabled_flag;
> + __u8 pcm_sample_bit_depth_luma_minus1;
> + __u8 pcm_sample_bit_depth_chroma_minus1;
> + __u8 log2_min_pcm_luma_coding_block_size_minus3;
> + __u8 log2_diff_max_min_pcm_luma_coding_block_size;
> + __u8 pcm_loop_filter_disabled_flag;
> + __u8 num_short_term_ref_pic_sets;
> + __u8 long_term_ref_pics_present_flag;
> + __u8 num_long_term_ref_pics_sps;
> + __u8 sps_temporal_mvp_enabled_flag;
> + __u8 strong_intra_smoothing_enabled_flag;
> +};
> +
> +struct v4l2_ctrl_hevc_pps {
> + /* ISO/IEC 23008-2, ITU-T Rec. H.265: Picture parameter set */
> + __u8 dependent_slice_segment_flag;
> + __u8 output_flag_present_flag;
> + __u8 num_extra_slice_header_bits;
> + __u8 sign_data_hiding_enabled_flag;
> + __u8 cabac_init_present_flag;
> + __s8 init_qp_minus26;
> + __u8 constrained_intra_pred_flag;
> + __u8 transform_skip_enabled_flag;
> + __u8 cu_qp_delta_enabled_flag;
> + __u8 diff_cu_qp_delta_depth;
> + __s8 pps_cb_qp_offset;
> + __s8 pps_cr_qp_offset;
> + __u8 pps_slice_chroma_qp_offsets_present_flag;
> + __u8 weighted_pred_flag;
> + __u8 weighted_bipred_flag;
> + __u8 transquant_bypass_enabled_flag;
> + __u8 tiles_enabled_flag;
> + __u8 entropy_coding_sync_enabled_flag;
> + __u8 num_tile_columns_minus1;
> + __u8 num_tile_rows_minus1;
> + __u8 column_width_minus1[20];
> + __u8 row_height_minus1[22];
> + __u8 loop_filter_across_tiles_enabled_flag;
> + __u8 pps_loop_filter_across_slices_enabled_flag;
> + __u8 deblocking_filter_override_enabled_flag;
> + __u8 pps_disable_deblocking_filter_flag;
> + __s8 pps_beta_offset_div2;
> + __s8 pps_tc_offset_div2;
> + __u8 lists_modification_present_flag;
> + __u8 log2_parallel_merge_level_minus2;
> + __u8 slice_segment_header_extension_present_flag;
> +};
Although scaling lists are not supported yet, I still think you should include
"scaling_list_data_present_flag" here for the sake of completeness and you
already included "scaling_list_enable_flag" in SPS.
I didn't do any thorough review though, just noticed this bit.
Best regards,
Jernej
> +
> +#define V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_BEFORE 0x01
> +#define V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_AFTER 0x02
> +#define V4L2_HEVC_DPB_ENTRY_RPS_LT_CURR 0x03
> +
> +#define V4L2_HEVC_DPB_ENTRIES_NUM_MAX 16
> +
> +struct v4l2_hevc_dpb_entry {
> + __u32 buffer_tag;
> + __u8 rps;
> + __u8 field_pic;
> + __u16 pic_order_cnt[2];
> +};
> +
> +struct v4l2_hevc_pred_weight_table {
> + __u8 luma_log2_weight_denom;
> + __s8 delta_chroma_log2_weight_denom;
> +
> + __s8 delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> + __s8 luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> + __s8 delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
> + __s8 chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
> +
> + __s8 delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> + __s8 luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> + __s8 delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
> + __s8 chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2];
> +};
> +
> +struct v4l2_ctrl_hevc_slice_params {
> + __u32 bit_size;
> + __u32 data_bit_offset;
> +
> + /* ISO/IEC 23008-2, ITU-T Rec. H.265: NAL unit header */
> + __u8 nal_unit_type;
> + __u8 nuh_temporal_id_plus1;
> +
> + /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */
> + __u8 slice_type;
> + __u8 colour_plane_id;
> + __u16 slice_pic_order_cnt;
> + __u8 slice_sao_luma_flag;
> + __u8 slice_sao_chroma_flag;
> + __u8 slice_temporal_mvp_enabled_flag;
> + __u8 num_ref_idx_l0_active_minus1;
> + __u8 num_ref_idx_l1_active_minus1;
> + __u8 mvd_l1_zero_flag;
> + __u8 cabac_init_flag;
> + __u8 collocated_from_l0_flag;
> + __u8 collocated_ref_idx;
> + __u8 five_minus_max_num_merge_cand;
> + __u8 use_integer_mv_flag;
> + __s8 slice_qp_delta;
> + __s8 slice_cb_qp_offset;
> + __s8 slice_cr_qp_offset;
> + __s8 slice_act_y_qp_offset;
> + __s8 slice_act_cb_qp_offset;
> + __s8 slice_act_cr_qp_offset;
> + __u8 slice_deblocking_filter_disabled_flag;
> + __s8 slice_beta_offset_div2;
> + __s8 slice_tc_offset_div2;
> + __u8 slice_loop_filter_across_slices_enabled_flag;
> +
> + /* ISO/IEC 23008-2, ITU-T Rec. H.265: Picture timing SEI message */
> + __u8 pic_struct;
> +
> + /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */
> + struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> + __u8 num_active_dpb_entries;
> + __u8 ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> + __u8 ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX];
> +
> + __u8 num_rps_poc_st_curr_before;
> + __u8 num_rps_poc_st_curr_after;
> + __u8 num_rps_poc_lt_curr;
> +
> + /* ISO/IEC 23008-2, ITU-T Rec. H.265: Weighted prediction parameter */
> + struct v4l2_hevc_pred_weight_table pred_weight_table;
> +};
> +
> #endif
next prev parent reply other threads:[~2018-12-05 20:59 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-23 13:02 [PATCH v2 0/2] HEVC/H.265 stateless support for V4L2 and Cedrus Paul Kocialkowski
2018-11-23 13:02 ` [PATCH v2 1/2] media: v4l: Add definitions for the HEVC slice format and controls Paul Kocialkowski
2018-12-05 13:18 ` Hans Verkuil
2018-12-05 20:59 ` Jernej Škrabec [this message]
2018-12-12 12:51 ` [linux-sunxi] " Paul Kocialkowski
2019-01-07 3:49 ` Randy Li
2019-01-07 9:57 ` Paul Kocialkowski
2019-01-08 1:16 ` Ayaka
2019-01-08 8:38 ` Paul Kocialkowski
2019-01-08 10:00 ` Ayaka
2019-01-10 13:32 ` ayaka
2019-01-24 10:27 ` Paul Kocialkowski
2019-01-24 12:23 ` Ayaka
2019-01-25 13:04 ` Paul Kocialkowski
2019-01-29 7:44 ` Alexandre Courbot
2019-01-29 8:09 ` Maxime Ripard
2019-01-29 9:39 ` Tomasz Figa
2019-01-29 21:41 ` Nicolas Dufresne
2019-01-30 2:28 ` Alexandre Courbot
2019-01-30 3:35 ` Tomasz Figa
2019-01-30 6:27 ` Ayaka
2019-01-30 7:17 ` Tomasz Figa
2019-01-30 9:54 ` Ayaka
2019-01-30 7:57 ` Maxime Ripard
2019-01-30 7:03 ` Ayaka
2019-01-24 10:36 ` Paul Kocialkowski
2019-01-24 12:19 ` Ayaka
2018-11-23 13:02 ` [PATCH v2 2/2] media: cedrus: Add HEVC/H.265 decoding support Paul Kocialkowski
2018-11-27 8:21 ` Maxime Ripard
2019-01-24 13:10 ` Paul Kocialkowski
2019-01-25 10:10 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5515174.7lFZcYkk85@jernej-laptop \
--to=jernej.skrabec@gmail.com \
--cc=acourbot@chromium.org \
--cc=ayaka@soulik.info \
--cc=devel@driverdev.osuosl.org \
--cc=ezequiel@collabora.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@bootlin.com \
--cc=mchehab@kernel.org \
--cc=paul.kocialkowski@bootlin.com \
--cc=tfiga@chromium.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox