From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mailout2.w1.samsung.com ([210.118.77.12]:11771 "EHLO mailout2.w1.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752810AbbC3Hgl (ORCPT ); Mon, 30 Mar 2015 03:36:41 -0400 Message-id: <5518FD05.5060800@samsung.com> Date: Mon, 30 Mar 2015 09:36:37 +0200 From: Jacek Anaszewski MIME-version: 1.0 To: Sakari Ailus Cc: linux-leds@vger.kernel.org, linux-media@vger.kernel.org, devicetree@vger.kernel.org, kyungmin.park@samsung.com, pavel@ucw.cz, cooloney@gmail.com, rpurdie@rpsys.net, s.nawrocki@samsung.com, Andrzej Hajda , Lee Jones , Chanwoo Choi Subject: Re: [PATCH v2 04/11] DT: Add documentation for the mfd Maxim max77693 References: <1427464185-27950-1-git-send-email-j.anaszewski@samsung.com> <1427464185-27950-5-git-send-email-j.anaszewski@samsung.com> <20150328225503.GZ18321@valkosipuli.retiisi.org.uk> In-reply-to: <20150328225503.GZ18321@valkosipuli.retiisi.org.uk> Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Hi Sakari, On 03/28/2015 11:55 PM, Sakari Ailus wrote: > On Fri, Mar 27, 2015 at 02:49:38PM +0100, Jacek Anaszewski wrote: >> This patch adds device tree binding documentation for >> the flash cell of the Maxim max77693 multifunctional device. >> >> Signed-off-by: Jacek Anaszewski >> Signed-off-by: Andrzej Hajda >> Acked-by: Kyungmin Park >> Acked-by: Sakari Ailus >> Cc: Lee Jones >> Cc: Chanwoo Choi >> Cc: Bryan Wu >> Cc: Richard Purdie >> --- >> Documentation/devicetree/bindings/mfd/max77693.txt | 61 ++++++++++++++++++++ >> 1 file changed, 61 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt >> index 38e6440..15c546ea 100644 >> --- a/Documentation/devicetree/bindings/mfd/max77693.txt >> +++ b/Documentation/devicetree/bindings/mfd/max77693.txt >> @@ -76,7 +76,53 @@ Optional properties: >> Valid values: 4300000, 4700000, 4800000, 4900000 >> Default: 4300000 >> >> +- led : the LED submodule device node >> + >> +There are two LED outputs available - FLED1 and FLED2. Each of them can >> +control a separate LED or they can be connected together to double >> +the maximum current for a single connected LED. One LED is represented >> +by one child node. >> + >> +Required properties: >> +- compatible : Must be "maxim,max77693-led". >> + >> +Optional properties: >> +- maxim,trigger-type : Flash trigger type. >> + Possible trigger types: >> + LEDS_TRIG_TYPE_EDGE (0) - Rising edge of the signal triggers >> + the flash, >> + LEDS_TRIG_TYPE_LEVEL (1) - Strobe pulse length controls duration >> + of the flash. >> +- maxim,boost-mode : >> + In boost mode the device can produce up to 1.2A of total current >> + on both outputs. The maximum current on each output is reduced >> + to 625mA then. If not enabled explicitly, boost setting defaults to >> + LEDS_BOOST_FIXED in case both current sources are used. >> + Possible values: >> + LEDS_BOOST_OFF (0) - no boost, >> + LEDS_BOOST_ADAPTIVE (1) - adaptive mode, >> + LEDS_BOOST_FIXED (2) - fixed mode. >> +- maxim,boost-mvout : Output voltage of the boost module in millivolts. > > What are the possible values for this? maxim,boost-mvout : Output voltage of the boost module in millivolts Range: 3300 - 5500 Do you think it is necessary to mention also allowed step for all the values? > Is the datasheet publicly available btw.? I have an access only to the non-public one. >> +- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired >> + if chip estimates that system voltage could drop below this level due >> + to flash power consumption. >> + >> +Required properties of the LED child node: >> +- led-sources : see Documentation/devicetree/bindings/leds/common.txt; >> + device current output identifiers: 0 - FLED1, 1 - FLED2 >> + >> +Optional properties of the LED child node: >> +- label : see Documentation/devicetree/bindings/leds/common.txt >> +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt >> + Range: 15625 - 250000 >> +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt >> + Range: 15625 - 1000000 >> +- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt >> + Range: 62500 - 1000000 >> + >> Example: >> +#include >> + >> max77693@66 { >> compatible = "maxim,max77693"; >> reg = <0x66>; >> @@ -117,5 +163,20 @@ Example: >> maxim,thermal-regulation-celsius = <75>; >> maxim,battery-overcurrent-microamp = <3000000>; >> maxim,charge-input-threshold-microvolt = <4300000>; >> + >> + led { >> + compatible = "maxim,max77693-led"; >> + maxim,trigger-type = ; >> + maxim,boost-mode = ; >> + maxim,boost-mvout = <5000>; >> + maxim,mvsys-min = <2400>; >> + >> + camera_flash: flash-led { >> + label = "max77693-flash"; >> + led-sources = <0>, <1>; >> + max-microamp = <500000>; >> + flash-max-microamp = <1250000>; >> + flash-timeout-us = <1000000>; >> + }; >> }; >> }; > -- Best Regards, Jacek Anaszewski