From: Hans Verkuil <hverkuil@xs4all.nl>
To: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: linux-media@vger.kernel.org, Hans Verkuil <hans.verkuil@cisco.com>
Subject: Re: [PATCH 8/9] ov9740: avoid calling ov9740_res_roundup() twice
Date: Mon, 04 May 2015 12:20:00 +0200 [thread overview]
Message-ID: <554747D0.50008@xs4all.nl> (raw)
In-Reply-To: <Pine.LNX.4.64.1505032244370.6055@axis700.grange>
On 05/03/2015 10:47 PM, Guennadi Liakhovetski wrote:
> Hi Hans,
>
> On Sun, 3 May 2015, Hans Verkuil wrote:
>
>> From: Hans Verkuil <hans.verkuil@cisco.com>
>>
>> Simplify ov9740_s_fmt.
>>
>> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
>> Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
>> ---
>> drivers/media/i2c/soc_camera/ov9740.c | 18 +-----------------
>> 1 file changed, 1 insertion(+), 17 deletions(-)
>>
>> diff --git a/drivers/media/i2c/soc_camera/ov9740.c b/drivers/media/i2c/soc_camera/ov9740.c
>> index 03a7fc7..61a8e18 100644
>> --- a/drivers/media/i2c/soc_camera/ov9740.c
>> +++ b/drivers/media/i2c/soc_camera/ov9740.c
>> @@ -673,20 +673,8 @@ static int ov9740_s_fmt(struct v4l2_subdev *sd,
>> {
>> struct i2c_client *client = v4l2_get_subdevdata(sd);
>> struct ov9740_priv *priv = to_ov9740(sd);
>> - enum v4l2_colorspace cspace;
>> - u32 code = mf->code;
>> int ret;
>>
>> - ov9740_res_roundup(&mf->width, &mf->height);
>> -
>> - switch (code) {
>> - case MEDIA_BUS_FMT_YUYV8_2X8:
>> - cspace = V4L2_COLORSPACE_SRGB;
>> - break;
>> - default:
>> - return -EINVAL;
>> - }
>> -
>
> ov9740_s_fmt() is also called from ov9740_s_power(), so, don't we have to
> do this simplification the other way round - remove redundant code from
> ov9740_set_fmt() instead?
Yes, but s_power is also calling ov9740_res_roundup() and it sets mf->code and
mf->colorspace to the correct values. So this code in s_fmt is a duplicate
for both s_power and for set_fmt. It can't be removed from set_fmt either
since it is needed for the TRY_FORMAT case anyway.
So IMHO it makes sense to remove it from s_fmt.
Regards,
Hans
>
> Thanks
> Guennadi
>
>> ret = ov9740_reg_write_array(client, ov9740_defaults,
>> ARRAY_SIZE(ov9740_defaults));
>> if (ret < 0)
>> @@ -696,11 +684,7 @@ static int ov9740_s_fmt(struct v4l2_subdev *sd,
>> if (ret < 0)
>> return ret;
>>
>> - mf->code = code;
>> - mf->colorspace = cspace;
>> -
>> - memcpy(&priv->current_mf, mf, sizeof(struct v4l2_mbus_framefmt));
>> -
>> + priv->current_mf = *mf;
>> return ret;
>> }
>>
>> --
>> 2.1.4
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2015-05-04 10:20 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-03 9:54 [PATCH 0/9] soc-camera sensor improvements Hans Verkuil
2015-05-03 9:54 ` [PATCH 1/9] imx074: don't call imx074_find_datafmt() twice Hans Verkuil
2015-05-03 17:54 ` Guennadi Liakhovetski
2015-05-04 7:22 ` Hans Verkuil
2015-05-03 9:54 ` [PATCH 2/9] mt9m001: avoid calling mt9m001_find_datafmt() twice Hans Verkuil
2015-05-03 17:56 ` Guennadi Liakhovetski
2015-05-03 9:54 ` [PATCH 3/9] mt9v022: avoid calling mt9v022_find_datafmt() twice Hans Verkuil
2015-05-03 17:57 ` Guennadi Liakhovetski
2015-05-03 9:54 ` [PATCH 4/9] ov2640: avoid calling ov2640_select_win() twice Hans Verkuil
2015-05-03 18:19 ` Guennadi Liakhovetski
2015-05-04 7:25 ` Hans Verkuil
2015-05-03 9:54 ` [PATCH 5/9] ov5642: avoid calling ov5642_find_datafmt() twice Hans Verkuil
2015-05-03 20:24 ` Guennadi Liakhovetski
2015-05-04 7:26 ` Hans Verkuil
2015-05-03 9:54 ` [PATCH 6/9] ov772x: avoid calling ov772x_select_params() twice Hans Verkuil
2015-05-03 20:30 ` Guennadi Liakhovetski
2015-05-03 9:54 ` [PATCH 7/9] ov9640: avoid calling ov9640_res_roundup() twice Hans Verkuil
2015-05-03 20:34 ` Guennadi Liakhovetski
2015-05-03 9:54 ` [PATCH 8/9] ov9740: avoid calling ov9740_res_roundup() twice Hans Verkuil
2015-05-03 20:47 ` Guennadi Liakhovetski
2015-05-04 10:20 ` Hans Verkuil [this message]
2015-05-03 9:54 ` [PATCH 9/9] mt9t112: initialize left and top Hans Verkuil
2015-05-03 21:02 ` Guennadi Liakhovetski
2015-05-03 21:09 ` Guennadi Liakhovetski
2015-05-04 7:31 ` Hans Verkuil
2015-05-04 7:40 ` Guennadi Liakhovetski
2015-05-04 7:43 ` Hans Verkuil
2015-05-04 7:54 ` Guennadi Liakhovetski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=554747D0.50008@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=g.liakhovetski@gmx.de \
--cc=hans.verkuil@cisco.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox