* dvb_usb_af9015: command failed=1 - stable: 4.0.2 @ 2015-05-08 10:20 poma 2015-05-08 10:59 ` poma 0 siblings, 1 reply; 12+ messages in thread From: poma @ 2015-05-08 10:20 UTC (permalink / raw) To: linux-media; +Cc: Antti Palosaari [ 0.000000] Linux version 4.0.2-200.fc21.x86_64 ... [ 0.870875] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 0.990286] usb 1-2: New USB device found, idVendor=15a4, idProduct=9016 [ 0.992575] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 0.994859] usb 1-2: Product: DVB-T 2 [ 1.001398] usb 1-2: Manufacturer: Afatech [ 1.003555] usb 1-2: SerialNumber: 010101010600001 [ 1.009194] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7 [ 1.011694] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/0003:15A4:9016.0001/input/input5 [ 1.066814] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2/input1 [ 11.997119] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state [ 12.206778] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 12.207412] DVB: registering new adapter (Afatech AF9015 reference design) [ 12.286137] i2c i2c-13: af9013: firmware version 5.1.0.0 [ 12.289121] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)... [ 12.343650] mxl5007t 13-00c0: creating new instance [ 12.346003] mxl5007t_get_chip_id: unknown rev (3f) [ 12.346156] mxl5007t_get_chip_id: MxL5007T detected @ 13-00c0 [ 12.350371] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 12.350649] DVB: registering new adapter (Afatech AF9015 reference design) [ 12.553632] i2c i2c-13: af9013: found a 'Afatech AF9013' in warm state [ 12.557256] i2c i2c-13: af9013: firmware version 5.1.0.0 [ 12.563779] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)... [ 12.564554] mxl5007t 13-00c0: attaching existing instance [ 12.567004] usb 1-2: dvb_usb_af9015: command failed=1 [ 12.567555] mxl5007t_soft_reset: 521: failed! [ 12.569745] mxl5007t_attach: error -121 on line 907 [ 12.571231] usbcore: registered new interface driver dvb_usb_af9015 $ lsdvb lsdvb: Simple utility to list PCI/PCIe DVB devices Version: 0.0.4 Copyright (C) Manu Abraham $ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: dvb_usb_af9015: command failed=1 - stable: 4.0.2 2015-05-08 10:20 dvb_usb_af9015: command failed=1 - stable: 4.0.2 poma @ 2015-05-08 10:59 ` poma 2015-05-10 10:38 ` dvb_usb_af9015: command failed=1 >= 3.19.x poma 0 siblings, 1 reply; 12+ messages in thread From: poma @ 2015-05-08 10:59 UTC (permalink / raw) To: linux-media; +Cc: Antti Palosaari On 08.05.2015 12:20, poma wrote: > > [ 0.000000] Linux version 4.0.2-200.fc21.x86_64 ... > > [ 0.870875] usb 1-2: new high-speed USB device number 2 using ehci-pci > [ 0.990286] usb 1-2: New USB device found, idVendor=15a4, idProduct=9016 > [ 0.992575] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [ 0.994859] usb 1-2: Product: DVB-T 2 > > [ 1.001398] usb 1-2: Manufacturer: Afatech > [ 1.003555] usb 1-2: SerialNumber: 010101010600001 > [ 1.009194] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7 > [ 1.011694] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/0003:15A4:9016.0001/input/input5 > [ 1.066814] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2/input1 > > [ 11.997119] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state > [ 12.206778] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer > [ 12.207412] DVB: registering new adapter (Afatech AF9015 reference design) > > [ 12.286137] i2c i2c-13: af9013: firmware version 5.1.0.0 > [ 12.289121] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)... > [ 12.343650] mxl5007t 13-00c0: creating new instance > [ 12.346003] mxl5007t_get_chip_id: unknown rev (3f) > [ 12.346156] mxl5007t_get_chip_id: MxL5007T detected @ 13-00c0 > [ 12.350371] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer > [ 12.350649] DVB: registering new adapter (Afatech AF9015 reference design) > [ 12.553632] i2c i2c-13: af9013: found a 'Afatech AF9013' in warm state > [ 12.557256] i2c i2c-13: af9013: firmware version 5.1.0.0 > [ 12.563779] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)... > [ 12.564554] mxl5007t 13-00c0: attaching existing instance > [ 12.567004] usb 1-2: dvb_usb_af9015: command failed=1 > [ 12.567555] mxl5007t_soft_reset: 521: failed! > [ 12.569745] mxl5007t_attach: error -121 on line 907 > [ 12.571231] usbcore: registered new interface driver dvb_usb_af9015 > > > $ lsdvb > > lsdvb: Simple utility to list PCI/PCIe DVB devices > Version: 0.0.4 > Copyright (C) Manu Abraham > $ > Afatech AF9015 reference design: 3.18.12-200.fc21.x86_64 - OK 3.19.7-200.fc21.x86_64 - KO 4.0.2-200.fc21.x86_64 - KO 4.1.0-0.rc2.git3.1.fc23.x86_64 - KO If you have a patch to test, shout loudly. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: dvb_usb_af9015: command failed=1 >= 3.19.x 2015-05-08 10:59 ` poma @ 2015-05-10 10:38 ` poma 2015-05-10 22:25 ` dvb_usb_af9015: command failed=1 _ lsdvb " poma 0 siblings, 1 reply; 12+ messages in thread From: poma @ 2015-05-10 10:38 UTC (permalink / raw) To: linux-media; +Cc: Antti Palosaari, Michael Krufky On 08.05.2015 12:59, poma wrote: > On 08.05.2015 12:20, poma wrote: >> >> [ 0.000000] Linux version 4.0.2-200.fc21.x86_64 ... >> >> [ 0.870875] usb 1-2: new high-speed USB device number 2 using ehci-pci >> [ 0.990286] usb 1-2: New USB device found, idVendor=15a4, idProduct=9016 >> [ 0.992575] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >> [ 0.994859] usb 1-2: Product: DVB-T 2 >> >> [ 1.001398] usb 1-2: Manufacturer: Afatech >> [ 1.003555] usb 1-2: SerialNumber: 010101010600001 >> [ 1.009194] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7 >> [ 1.011694] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/0003:15A4:9016.0001/input/input5 >> [ 1.066814] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2/input1 >> >> [ 11.997119] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state >> [ 12.206778] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer >> [ 12.207412] DVB: registering new adapter (Afatech AF9015 reference design) >> >> [ 12.286137] i2c i2c-13: af9013: firmware version 5.1.0.0 >> [ 12.289121] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)... >> [ 12.343650] mxl5007t 13-00c0: creating new instance >> [ 12.346003] mxl5007t_get_chip_id: unknown rev (3f) >> [ 12.346156] mxl5007t_get_chip_id: MxL5007T detected @ 13-00c0 >> [ 12.350371] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer >> [ 12.350649] DVB: registering new adapter (Afatech AF9015 reference design) >> [ 12.553632] i2c i2c-13: af9013: found a 'Afatech AF9013' in warm state >> [ 12.557256] i2c i2c-13: af9013: firmware version 5.1.0.0 >> [ 12.563779] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)... >> [ 12.564554] mxl5007t 13-00c0: attaching existing instance >> [ 12.567004] usb 1-2: dvb_usb_af9015: command failed=1 >> [ 12.567555] mxl5007t_soft_reset: 521: failed! >> [ 12.569745] mxl5007t_attach: error -121 on line 907 >> [ 12.571231] usbcore: registered new interface driver dvb_usb_af9015 >> >> >> $ lsdvb >> >> lsdvb: Simple utility to list PCI/PCIe DVB devices >> Version: 0.0.4 >> Copyright (C) Manu Abraham >> $ >> > > > Afatech AF9015 reference design: > > 3.18.12-200.fc21.x86_64 - OK > > 3.19.7-200.fc21.x86_64 - KO > 4.0.2-200.fc21.x86_64 - KO > 4.1.0-0.rc2.git3.1.fc23.x86_64 - KO > > > If you have a patch to test, shout loudly. > > Looks like the same bug: AVerMedia HD Volar (A867) - Afatech AF9033 http://forum.sifteam.eu/sifbox-by-sif-team/125122-kernel-3-19-a867-xgaz-dove.html http://git.linuxtv.org/cgit.cgi/media_build.git - no positive effect. Ho ho ho ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: dvb_usb_af9015: command failed=1 _ lsdvb >= 3.19.x 2015-05-10 10:38 ` dvb_usb_af9015: command failed=1 >= 3.19.x poma @ 2015-05-10 22:25 ` poma 2015-05-11 18:43 ` dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x poma 0 siblings, 1 reply; 12+ messages in thread From: poma @ 2015-05-10 22:25 UTC (permalink / raw) To: linux-media; +Cc: Antti Palosaari, Michael Krufky, Manu Abraham On 10.05.2015 12:38, poma wrote: > On 08.05.2015 12:59, poma wrote: >> On 08.05.2015 12:20, poma wrote: >>> >>> [ 0.000000] Linux version 4.0.2-200.fc21.x86_64 ... >>> >>> [ 0.870875] usb 1-2: new high-speed USB device number 2 using ehci-pci >>> [ 0.990286] usb 1-2: New USB device found, idVendor=15a4, idProduct=9016 >>> [ 0.992575] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >>> [ 0.994859] usb 1-2: Product: DVB-T 2 >>> >>> [ 1.001398] usb 1-2: Manufacturer: Afatech >>> [ 1.003555] usb 1-2: SerialNumber: 010101010600001 >>> [ 1.009194] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7 >>> [ 1.011694] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/0003:15A4:9016.0001/input/input5 >>> [ 1.066814] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2/input1 >>> >>> [ 11.997119] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state >>> [ 12.206778] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer >>> [ 12.207412] DVB: registering new adapter (Afatech AF9015 reference design) >>> >>> [ 12.286137] i2c i2c-13: af9013: firmware version 5.1.0.0 >>> [ 12.289121] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)... >>> [ 12.343650] mxl5007t 13-00c0: creating new instance >>> [ 12.346003] mxl5007t_get_chip_id: unknown rev (3f) >>> [ 12.346156] mxl5007t_get_chip_id: MxL5007T detected @ 13-00c0 >>> [ 12.350371] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer >>> [ 12.350649] DVB: registering new adapter (Afatech AF9015 reference design) >>> [ 12.553632] i2c i2c-13: af9013: found a 'Afatech AF9013' in warm state >>> [ 12.557256] i2c i2c-13: af9013: firmware version 5.1.0.0 >>> [ 12.563779] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)... >>> [ 12.564554] mxl5007t 13-00c0: attaching existing instance >>> [ 12.567004] usb 1-2: dvb_usb_af9015: command failed=1 >>> [ 12.567555] mxl5007t_soft_reset: 521: failed! >>> [ 12.569745] mxl5007t_attach: error -121 on line 907 >>> [ 12.571231] usbcore: registered new interface driver dvb_usb_af9015 >>> >>> >>> $ lsdvb >>> >>> lsdvb: Simple utility to list PCI/PCIe DVB devices >>> Version: 0.0.4 >>> Copyright (C) Manu Abraham >>> $ >>> >> >> >> Afatech AF9015 reference design: >> >> 3.18.12-200.fc21.x86_64 - OK >> >> 3.19.7-200.fc21.x86_64 - KO >> 4.0.2-200.fc21.x86_64 - KO >> 4.1.0-0.rc2.git3.1.fc23.x86_64 - KO >> >> >> If you have a patch to test, shout loudly. >> >> > > Looks like the same bug: > AVerMedia HD Volar (A867) - Afatech AF9033 > http://forum.sifteam.eu/sifbox-by-sif-team/125122-kernel-3-19-a867-xgaz-dove.html > > http://git.linuxtv.org/cgit.cgi/media_build.git - no positive effect. > > > Ho ho ho > It seems the 'lsdvb' is what made the device unusable after re/boot. Of course this applies to kernel >= 3.19.x The device has to be unplugged and after a minute or two plugged back to be usable again. $ lsdvb lsdvb: Simple utility to list PCI/PCIe DVB devices Version: 0.0.4 Copyright (C) Manu Abraham usb (5:0 -868620712:32665) on PCI Domain:-874755276 Bus:32665 Device:2098 Function:0 DEVICE:0 ADAPTER:0 FRONTEND:0 (Afatech AF9013) FE_OFDM Fmin=174MHz Fmax=862MHz DEVICE:0 ADAPTER:1 FRONTEND:0 (Afatech AF9013) FE_OFDM Fmin=174MHz Fmax=862MHz $ dmesg [ 80.332837] usb 2-2: dvb_usb_af9015: command failed=1 [ 80.332857] i2c i2c-13: af9013: i2c wr failed=-5 reg=d607 len=1 [ 80.337837] usb 2-2: dvb_usb_af9015: command failed=1 [ 80.337848] mxl5007t_write_reg: 472: failed! [ 80.337853] mxl5007t_sleep: error -121 on line 709 [ 80.338324] usb 2-2: dvb_usb_af9015: command failed=1 [ 80.338328] mxl5007t_write_reg: 472: failed! [ 80.338332] mxl5007t_sleep: error -121 on line 711 ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x 2015-05-10 22:25 ` dvb_usb_af9015: command failed=1 _ lsdvb " poma @ 2015-05-11 18:43 ` poma 2015-05-12 14:11 ` Antti Palosaari 0 siblings, 1 reply; 12+ messages in thread From: poma @ 2015-05-11 18:43 UTC (permalink / raw) To: linux-media; +Cc: Antti Palosaari, Michael Krufky, Manu Abraham On 05/11/2015 12:25 AM, poma wrote: > On 10.05.2015 12:38, poma wrote: >> On 08.05.2015 12:59, poma wrote: >>> On 08.05.2015 12:20, poma wrote: >>>> >>>> [ 0.000000] Linux version 4.0.2-200.fc21.x86_64 ... >>>> >>>> [ 0.870875] usb 1-2: new high-speed USB device number 2 using ehci-pci >>>> [ 0.990286] usb 1-2: New USB device found, idVendor=15a4, idProduct=9016 >>>> [ 0.992575] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >>>> [ 0.994859] usb 1-2: Product: DVB-T 2 >>>> >>>> [ 1.001398] usb 1-2: Manufacturer: Afatech >>>> [ 1.003555] usb 1-2: SerialNumber: 010101010600001 >>>> [ 1.009194] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7 >>>> [ 1.011694] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/0003:15A4:9016.0001/input/input5 >>>> [ 1.066814] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2/input1 >>>> >>>> [ 11.997119] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state >>>> [ 12.206778] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer >>>> [ 12.207412] DVB: registering new adapter (Afatech AF9015 reference design) >>>> >>>> [ 12.286137] i2c i2c-13: af9013: firmware version 5.1.0.0 >>>> [ 12.289121] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)... >>>> [ 12.343650] mxl5007t 13-00c0: creating new instance >>>> [ 12.346003] mxl5007t_get_chip_id: unknown rev (3f) >>>> [ 12.346156] mxl5007t_get_chip_id: MxL5007T detected @ 13-00c0 >>>> [ 12.350371] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer >>>> [ 12.350649] DVB: registering new adapter (Afatech AF9015 reference design) >>>> [ 12.553632] i2c i2c-13: af9013: found a 'Afatech AF9013' in warm state >>>> [ 12.557256] i2c i2c-13: af9013: firmware version 5.1.0.0 >>>> [ 12.563779] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)... >>>> [ 12.564554] mxl5007t 13-00c0: attaching existing instance >>>> [ 12.567004] usb 1-2: dvb_usb_af9015: command failed=1 >>>> [ 12.567555] mxl5007t_soft_reset: 521: failed! >>>> [ 12.569745] mxl5007t_attach: error -121 on line 907 >>>> [ 12.571231] usbcore: registered new interface driver dvb_usb_af9015 >>>> >>>> >>>> $ lsdvb >>>> >>>> lsdvb: Simple utility to list PCI/PCIe DVB devices >>>> Version: 0.0.4 >>>> Copyright (C) Manu Abraham >>>> $ >>>> >>> >>> >>> Afatech AF9015 reference design: >>> >>> 3.18.12-200.fc21.x86_64 - OK >>> >>> 3.19.7-200.fc21.x86_64 - KO >>> 4.0.2-200.fc21.x86_64 - KO >>> 4.1.0-0.rc2.git3.1.fc23.x86_64 - KO >>> >>> >>> If you have a patch to test, shout loudly. >>> >>> >> >> Looks like the same bug: >> AVerMedia HD Volar (A867) - Afatech AF9033 >> http://forum.sifteam.eu/sifbox-by-sif-team/125122-kernel-3-19-a867-xgaz-dove.html >> >> http://git.linuxtv.org/cgit.cgi/media_build.git - no positive effect. >> >> >> Ho ho ho >> > > It seems the 'lsdvb' is what made the device unusable after re/boot. > Of course this applies to kernel >= 3.19.x > The device has to be unplugged and after a minute or two plugged back to be usable again. > > > $ lsdvb > > lsdvb: Simple utility to list PCI/PCIe DVB devices > Version: 0.0.4 > Copyright (C) Manu Abraham > > usb (5:0 -868620712:32665) on PCI Domain:-874755276 Bus:32665 Device:2098 Function:0 > DEVICE:0 ADAPTER:0 FRONTEND:0 (Afatech AF9013) > FE_OFDM Fmin=174MHz Fmax=862MHz > DEVICE:0 ADAPTER:1 FRONTEND:0 (Afatech AF9013) > FE_OFDM Fmin=174MHz Fmax=862MHz > > $ dmesg > [ 80.332837] usb 2-2: dvb_usb_af9015: command failed=1 > [ 80.332857] i2c i2c-13: af9013: i2c wr failed=-5 reg=d607 len=1 > [ 80.337837] usb 2-2: dvb_usb_af9015: command failed=1 > [ 80.337848] mxl5007t_write_reg: 472: failed! > [ 80.337853] mxl5007t_sleep: error -121 on line 709 > [ 80.338324] usb 2-2: dvb_usb_af9015: command failed=1 > [ 80.338328] mxl5007t_write_reg: 472: failed! > [ 80.338332] mxl5007t_sleep: error -121 on line 711 > > > Furthermore, it is sufficient to re/boot to the latest kernels, and the device is K.O. again, e.g. # modinfo -n mxl5007t /lib/modules/4.1.0-0.rc3.git0.1.fc23.x86_64+debug/kernel/drivers/media/tuners/mxl5007t.ko.xz ... [ 13.874536] i2c i2c-13: af9013: found a 'Afatech AF9013' in warm state [ 13.878031] i2c i2c-13: af9013: firmware version 5.1.0.0 [ 13.884691] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)... [ 13.884942] mxl5007t 13-00c0: attaching existing instance [ 13.887166] usb 1-2: dvb_usb_af9015: command failed=1 [ 13.887179] mxl5007t_soft_reset: 521: failed! [ 13.888780] mxl5007t_attach: error -121 on line 907 [ 13.897808] usbcore: registered new interface driver dvb_usb_af9015 ... # ls -al /dev/dvb ls: cannot access /dev/dvb: No such file or directory Keep in mind, this time it has nothing to do with 'lsdvb', # lsdvb -bash: /bin/lsdvb: Permission denied ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x 2015-05-11 18:43 ` dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x poma @ 2015-05-12 14:11 ` Antti Palosaari 2015-05-13 3:56 ` poma 0 siblings, 1 reply; 12+ messages in thread From: Antti Palosaari @ 2015-05-12 14:11 UTC (permalink / raw) To: poma, linux-media; +Cc: Michael Krufky, Manu Abraham On 05/11/2015 09:43 PM, poma wrote: > On 05/11/2015 12:25 AM, poma wrote: >> On 10.05.2015 12:38, poma wrote: >>> On 08.05.2015 12:59, poma wrote: >>>> On 08.05.2015 12:20, poma wrote: >>>>> >>>>> [ 0.000000] Linux version 4.0.2-200.fc21.x86_64 ... >>>>> >>>>> [ 0.870875] usb 1-2: new high-speed USB device number 2 using ehci-pci >>>>> [ 0.990286] usb 1-2: New USB device found, idVendor=15a4, idProduct=9016 >>>>> [ 0.992575] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >>>>> [ 0.994859] usb 1-2: Product: DVB-T 2 >>>>> >>>>> [ 1.001398] usb 1-2: Manufacturer: Afatech >>>>> [ 1.003555] usb 1-2: SerialNumber: 010101010600001 >>>>> [ 1.009194] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7 >>>>> [ 1.011694] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/0003:15A4:9016.0001/input/input5 >>>>> [ 1.066814] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2/input1 >>>>> >>>>> [ 11.997119] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state >>>>> [ 12.206778] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer >>>>> [ 12.207412] DVB: registering new adapter (Afatech AF9015 reference design) >>>>> >>>>> [ 12.286137] i2c i2c-13: af9013: firmware version 5.1.0.0 >>>>> [ 12.289121] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)... >>>>> [ 12.343650] mxl5007t 13-00c0: creating new instance >>>>> [ 12.346003] mxl5007t_get_chip_id: unknown rev (3f) >>>>> [ 12.346156] mxl5007t_get_chip_id: MxL5007T detected @ 13-00c0 >>>>> [ 12.350371] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer >>>>> [ 12.350649] DVB: registering new adapter (Afatech AF9015 reference design) >>>>> [ 12.553632] i2c i2c-13: af9013: found a 'Afatech AF9013' in warm state >>>>> [ 12.557256] i2c i2c-13: af9013: firmware version 5.1.0.0 >>>>> [ 12.563779] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)... >>>>> [ 12.564554] mxl5007t 13-00c0: attaching existing instance >>>>> [ 12.567004] usb 1-2: dvb_usb_af9015: command failed=1 >>>>> [ 12.567555] mxl5007t_soft_reset: 521: failed! >>>>> [ 12.569745] mxl5007t_attach: error -121 on line 907 >>>>> [ 12.571231] usbcore: registered new interface driver dvb_usb_af9015 >>>>> >>>>> >>>>> $ lsdvb >>>>> >>>>> lsdvb: Simple utility to list PCI/PCIe DVB devices >>>>> Version: 0.0.4 >>>>> Copyright (C) Manu Abraham >>>>> $ >>>>> >>>> >>>> >>>> Afatech AF9015 reference design: >>>> >>>> 3.18.12-200.fc21.x86_64 - OK >>>> >>>> 3.19.7-200.fc21.x86_64 - KO >>>> 4.0.2-200.fc21.x86_64 - KO >>>> 4.1.0-0.rc2.git3.1.fc23.x86_64 - KO >>>> >>>> >>>> If you have a patch to test, shout loudly. >>>> >>>> >>> >>> Looks like the same bug: >>> AVerMedia HD Volar (A867) - Afatech AF9033 >>> http://forum.sifteam.eu/sifbox-by-sif-team/125122-kernel-3-19-a867-xgaz-dove.html >>> >>> http://git.linuxtv.org/cgit.cgi/media_build.git - no positive effect. >>> >>> >>> Ho ho ho >>> >> >> It seems the 'lsdvb' is what made the device unusable after re/boot. >> Of course this applies to kernel >= 3.19.x >> The device has to be unplugged and after a minute or two plugged back to be usable again. >> >> >> $ lsdvb >> >> lsdvb: Simple utility to list PCI/PCIe DVB devices >> Version: 0.0.4 >> Copyright (C) Manu Abraham >> >> usb (5:0 -868620712:32665) on PCI Domain:-874755276 Bus:32665 Device:2098 Function:0 >> DEVICE:0 ADAPTER:0 FRONTEND:0 (Afatech AF9013) >> FE_OFDM Fmin=174MHz Fmax=862MHz >> DEVICE:0 ADAPTER:1 FRONTEND:0 (Afatech AF9013) >> FE_OFDM Fmin=174MHz Fmax=862MHz >> >> $ dmesg >> [ 80.332837] usb 2-2: dvb_usb_af9015: command failed=1 >> [ 80.332857] i2c i2c-13: af9013: i2c wr failed=-5 reg=d607 len=1 >> [ 80.337837] usb 2-2: dvb_usb_af9015: command failed=1 >> [ 80.337848] mxl5007t_write_reg: 472: failed! >> [ 80.337853] mxl5007t_sleep: error -121 on line 709 >> [ 80.338324] usb 2-2: dvb_usb_af9015: command failed=1 >> [ 80.338328] mxl5007t_write_reg: 472: failed! >> [ 80.338332] mxl5007t_sleep: error -121 on line 711 >> >> >> > > > Furthermore, it is sufficient to re/boot to the latest kernels, > and the device is K.O. again, > > e.g. > # modinfo -n mxl5007t > /lib/modules/4.1.0-0.rc3.git0.1.fc23.x86_64+debug/kernel/drivers/media/tuners/mxl5007t.ko.xz > > ... > [ 13.874536] i2c i2c-13: af9013: found a 'Afatech AF9013' in warm state > [ 13.878031] i2c i2c-13: af9013: firmware version 5.1.0.0 > [ 13.884691] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)... > [ 13.884942] mxl5007t 13-00c0: attaching existing instance > [ 13.887166] usb 1-2: dvb_usb_af9015: command failed=1 > [ 13.887179] mxl5007t_soft_reset: 521: failed! > [ 13.888780] mxl5007t_attach: error -121 on line 907 > [ 13.897808] usbcore: registered new interface driver dvb_usb_af9015 > ... > > # ls -al /dev/dvb > ls: cannot access /dev/dvb: No such file or directory > > > Keep in mind, this time it has nothing to do with 'lsdvb', > > # lsdvb > -bash: /bin/lsdvb: Permission denied It is that commit which causes the problem: commit fe4860af002a4516dd878f7297b61e186c475b35 [media] [PATH,1/2] mxl5007 move reset to attach ... but I am pretty sure actual root of cause something else. Likely your second tuner chip is on reset/powered off and due to that it does not answer. I have almost similar device which works (DigitalNow TinyTwin). Maybe I should try to test which are that tuner GPIO reset lines... but I am a bit lazy :/ regards Antti -- http://palosaari.fi/ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x 2015-05-12 14:11 ` Antti Palosaari @ 2015-05-13 3:56 ` poma 2015-05-16 23:07 ` Antti Palosaari 0 siblings, 1 reply; 12+ messages in thread From: poma @ 2015-05-13 3:56 UTC (permalink / raw) To: Antti Palosaari, linux-media; +Cc: Michael Krufky, Manu Abraham On 12.05.2015 16:11, Antti Palosaari wrote: > On 05/11/2015 09:43 PM, poma wrote: >> On 05/11/2015 12:25 AM, poma wrote: >>> On 10.05.2015 12:38, poma wrote: >>>> On 08.05.2015 12:59, poma wrote: >>>>> On 08.05.2015 12:20, poma wrote: >>>>>> >>>>>> [ 0.000000] Linux version 4.0.2-200.fc21.x86_64 ... >>>>>> >>>>>> [ 0.870875] usb 1-2: new high-speed USB device number 2 using ehci-pci >>>>>> [ 0.990286] usb 1-2: New USB device found, idVendor=15a4, idProduct=9016 >>>>>> [ 0.992575] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >>>>>> [ 0.994859] usb 1-2: Product: DVB-T 2 >>>>>> >>>>>> [ 1.001398] usb 1-2: Manufacturer: Afatech >>>>>> [ 1.003555] usb 1-2: SerialNumber: 010101010600001 >>>>>> [ 1.009194] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7 >>>>>> [ 1.011694] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/0003:15A4:9016.0001/input/input5 >>>>>> [ 1.066814] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2/input1 >>>>>> >>>>>> [ 11.997119] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state >>>>>> [ 12.206778] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer >>>>>> [ 12.207412] DVB: registering new adapter (Afatech AF9015 reference design) >>>>>> >>>>>> [ 12.286137] i2c i2c-13: af9013: firmware version 5.1.0.0 >>>>>> [ 12.289121] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)... >>>>>> [ 12.343650] mxl5007t 13-00c0: creating new instance >>>>>> [ 12.346003] mxl5007t_get_chip_id: unknown rev (3f) >>>>>> [ 12.346156] mxl5007t_get_chip_id: MxL5007T detected @ 13-00c0 >>>>>> [ 12.350371] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer >>>>>> [ 12.350649] DVB: registering new adapter (Afatech AF9015 reference design) >>>>>> [ 12.553632] i2c i2c-13: af9013: found a 'Afatech AF9013' in warm state >>>>>> [ 12.557256] i2c i2c-13: af9013: firmware version 5.1.0.0 >>>>>> [ 12.563779] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)... >>>>>> [ 12.564554] mxl5007t 13-00c0: attaching existing instance >>>>>> [ 12.567004] usb 1-2: dvb_usb_af9015: command failed=1 >>>>>> [ 12.567555] mxl5007t_soft_reset: 521: failed! >>>>>> [ 12.569745] mxl5007t_attach: error -121 on line 907 >>>>>> [ 12.571231] usbcore: registered new interface driver dvb_usb_af9015 >>>>>> >>>>>> >>>>>> $ lsdvb >>>>>> >>>>>> lsdvb: Simple utility to list PCI/PCIe DVB devices >>>>>> Version: 0.0.4 >>>>>> Copyright (C) Manu Abraham >>>>>> $ >>>>>> >>>>> >>>>> >>>>> Afatech AF9015 reference design: >>>>> >>>>> 3.18.12-200.fc21.x86_64 - OK >>>>> >>>>> 3.19.7-200.fc21.x86_64 - KO >>>>> 4.0.2-200.fc21.x86_64 - KO >>>>> 4.1.0-0.rc2.git3.1.fc23.x86_64 - KO >>>>> >>>>> >>>>> If you have a patch to test, shout loudly. >>>>> >>>>> >>>> >>>> Looks like the same bug: >>>> AVerMedia HD Volar (A867) - Afatech AF9033 >>>> http://forum.sifteam.eu/sifbox-by-sif-team/125122-kernel-3-19-a867-xgaz-dove.html >>>> >>>> http://git.linuxtv.org/cgit.cgi/media_build.git - no positive effect. >>>> >>>> >>>> Ho ho ho >>>> >>> >>> It seems the 'lsdvb' is what made the device unusable after re/boot. >>> Of course this applies to kernel >= 3.19.x >>> The device has to be unplugged and after a minute or two plugged back to be usable again. >>> >>> >>> $ lsdvb >>> >>> lsdvb: Simple utility to list PCI/PCIe DVB devices >>> Version: 0.0.4 >>> Copyright (C) Manu Abraham >>> >>> usb (5:0 -868620712:32665) on PCI Domain:-874755276 Bus:32665 Device:2098 Function:0 >>> DEVICE:0 ADAPTER:0 FRONTEND:0 (Afatech AF9013) >>> FE_OFDM Fmin=174MHz Fmax=862MHz >>> DEVICE:0 ADAPTER:1 FRONTEND:0 (Afatech AF9013) >>> FE_OFDM Fmin=174MHz Fmax=862MHz >>> >>> $ dmesg >>> [ 80.332837] usb 2-2: dvb_usb_af9015: command failed=1 >>> [ 80.332857] i2c i2c-13: af9013: i2c wr failed=-5 reg=d607 len=1 >>> [ 80.337837] usb 2-2: dvb_usb_af9015: command failed=1 >>> [ 80.337848] mxl5007t_write_reg: 472: failed! >>> [ 80.337853] mxl5007t_sleep: error -121 on line 709 >>> [ 80.338324] usb 2-2: dvb_usb_af9015: command failed=1 >>> [ 80.338328] mxl5007t_write_reg: 472: failed! >>> [ 80.338332] mxl5007t_sleep: error -121 on line 711 >>> >>> >>> >> >> >> Furthermore, it is sufficient to re/boot to the latest kernels, >> and the device is K.O. again, >> >> e.g. >> # modinfo -n mxl5007t >> /lib/modules/4.1.0-0.rc3.git0.1.fc23.x86_64+debug/kernel/drivers/media/tuners/mxl5007t.ko.xz >> >> ... >> [ 13.874536] i2c i2c-13: af9013: found a 'Afatech AF9013' in warm state >> [ 13.878031] i2c i2c-13: af9013: firmware version 5.1.0.0 >> [ 13.884691] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)... >> [ 13.884942] mxl5007t 13-00c0: attaching existing instance >> [ 13.887166] usb 1-2: dvb_usb_af9015: command failed=1 >> [ 13.887179] mxl5007t_soft_reset: 521: failed! >> [ 13.888780] mxl5007t_attach: error -121 on line 907 >> [ 13.897808] usbcore: registered new interface driver dvb_usb_af9015 >> ... >> >> # ls -al /dev/dvb >> ls: cannot access /dev/dvb: No such file or directory >> >> >> Keep in mind, this time it has nothing to do with 'lsdvb', >> >> # lsdvb >> -bash: /bin/lsdvb: Permission denied > > It is that commit which causes the problem: > commit fe4860af002a4516dd878f7297b61e186c475b35 > [media] [PATH,1/2] mxl5007 move reset to attach > > ... but I am pretty sure actual root of cause something else. Likely > your second tuner chip is on reset/powered off and due to that it does > not answer. I have almost similar device which works (DigitalNow TinyTwin). > > Maybe I should try to test which are that tuner GPIO reset lines... but > I am a bit lazy :/ > > regards > Antti > Is a beer keg enough as bribe? :) Just do not say that you drink juice. After the reverting of all changes http://git.linuxtv.org/cgit.cgi/media_tree.git/log/drivers/media/tuners/mxl5007t.c device now survives both, 'lsdvb' and rc kernels. Besides, despite all this, this device is already not working at its full potential. One of the tuners can withstand a few hours and then hangs. After that, in the application e.g. vlc is needed to select the second tuner and so continue to use the device. So this is actually a "single-seater" as Formula 1. Vroom vroom! mxl5007t.c | 28 +++++----------------------- 1 file changed, 5 insertions(+), 23 deletions(-) --- a/drivers/media/tuners/mxl5007t.c 2015-05-13 04:50:18.362256795 +0200 +++ b/drivers/media/tuners/mxl5007t.c 2015-05-13 05:05:15.070996638 +0200 @@ -374,6 +374,7 @@ mxl5007t_set_if_freq_bits(state, cfg->if_freq_hz, cfg->invert_if); mxl5007t_set_xtal_freq_bits(state, cfg->xtal_freq_hz); + set_reg_bits(state->tab_init, 0x04, 0x01, cfg->loop_thru_enable); set_reg_bits(state->tab_init, 0x03, 0x08, cfg->clk_out_enable << 3); set_reg_bits(state->tab_init, 0x03, 0x07, cfg->clk_out_amp); @@ -530,6 +531,10 @@ struct reg_pair_t *init_regs; int ret; + ret = mxl5007t_soft_reset(state); + if (mxl_fail(ret)) + goto fail; + /* calculate initialization reg array */ init_regs = mxl5007t_calc_init_regs(state, mode); @@ -896,29 +901,6 @@ break; } - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - - ret = mxl5007t_soft_reset(state); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 0); - - if (mxl_fail(ret)) - goto fail; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - - ret = mxl5007t_write_reg(state, 0x04, - state->config->loop_thru_enable); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 0); - - if (mxl_fail(ret)) - goto fail; - fe->tuner_priv = state; mutex_unlock(&mxl5007t_list_mutex); $ modinfo mxl5007t filename: /lib/modules/4.1.0-0.rc3.git1.1.fc23.x86_64/updates/mxl5007t.ko version: 0.2 license: GPL author: Michael Krufky <mkrufky@linuxtv.org> description: MaxLinear MxL5007T Silicon IC tuner driver srcversion: 72D27DB6EF6CEC612700FB9 depends: intree: Y vermagic: 4.1.0-0.rc3.git1.1.fc23.x86_64 SMP mod_unload parm: debug:set debug level (int) $ dmesg [ 1.114202] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 1.235071] usb 1-2: New USB device found, idVendor=15a4, idProduct=9016 [ 1.237463] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.239831] usb 1-2: Product: DVB-T 2 [ 1.242163] usb 1-2: Manufacturer: Afatech [ 1.244422] usb 1-2: SerialNumber: 010101010600001 [ 1.251607] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7 [ 1.254602] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/0003:15A4:9016.0001/input/input5 [ 1.311052] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2/input1 [ 14.326420] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state [ 14.563618] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 14.563854] DVB: registering new adapter (Afatech AF9015 reference design) [ 14.622564] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)... [ 14.659556] mxl5007t: module verification failed: signature and/or required key missing - tainting kernel [ 14.660903] mxl5007t 13-00c0: creating new instance [ 14.663714] mxl5007t_get_chip_id: unknown rev (3f) [ 14.663727] mxl5007t_get_chip_id: MxL5007T detected @ 13-00c0 [ 14.664450] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 14.664603] DVB: registering new adapter (Afatech AF9015 reference design) [ 14.882505] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)... [ 14.883176] mxl5007t 13-00c0: attaching existing instance [ 14.905227] input: Afatech AF9015 reference design as /devices/pci0000:00/0000:00:02.1/usb1/1-2/rc/rc0/input14 [ 14.907885] rc0: Afatech AF9015 reference design as /devices/pci0000:00/0000:00:02.1/usb1/1-2/rc/rc0 [ 14.907917] usb 1-2: dvb_usb_v2: schedule remote query interval to 500 msecs [ 14.908170] usb 1-2: dvb_usb_v2: 'Afatech AF9015 reference design' successfully initialized and connected [ 14.908490] usbcore: registered new interface driver dvb_usb_af9015 $ lsdvb lsdvb: Simple utility to list PCI/PCIe DVB devices Version: 0.0.4 Copyright (C) Manu Abraham usb (5:0 -956221864:32726) on PCI Domain:-962356428 Bus:32726 Device:2098 Function:0 DEVICE:0 ADAPTER:0 FRONTEND:0 (Afatech AF9013) FE_OFDM Fmin=174MHz Fmax=862MHz DEVICE:0 ADAPTER:1 FRONTEND:0 (Afatech AF9013) FE_OFDM Fmin=174MHz Fmax=862MHz $ dmesg [ 306.258474] usb 1-2: dvb_usb_af9015: command failed=1 [ 306.258500] i2c i2c-13: af9013: i2c wr failed=-5 reg=d607 len=1 [ 306.264805] usb 1-2: dvb_usb_af9015: command failed=1 [ 306.264819] mxl5007t_write_reg: 473: failed! [ 306.264826] mxl5007t_sleep: error -121 on line 714 [ 306.265298] usb 1-2: dvb_usb_af9015: command failed=1 [ 306.265306] mxl5007t_write_reg: 473: failed! [ 306.265309] mxl5007t_sleep: error -121 on line 716 ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x 2015-05-13 3:56 ` poma @ 2015-05-16 23:07 ` Antti Palosaari 2015-05-18 19:15 ` poma 0 siblings, 1 reply; 12+ messages in thread From: Antti Palosaari @ 2015-05-16 23:07 UTC (permalink / raw) To: poma, linux-media; +Cc: Michael Krufky, Manu Abraham On 05/13/2015 06:56 AM, poma wrote: > On 12.05.2015 16:11, Antti Palosaari wrote: >> On 05/11/2015 09:43 PM, poma wrote: >>> On 05/11/2015 12:25 AM, poma wrote: >>>> On 10.05.2015 12:38, poma wrote: >>>>> On 08.05.2015 12:59, poma wrote: > Is a beer keg enough as bribe? :) > Just do not say that you drink juice. > > After the reverting of all changes > http://git.linuxtv.org/cgit.cgi/media_tree.git/log/drivers/media/tuners/mxl5007t.c > > device now survives both, 'lsdvb' and rc kernels. > > Besides, despite all this, this device is already not working at its full potential. > One of the tuners can withstand a few hours and then hangs. > After that, in the application e.g. vlc is needed to select the second tuner and so continue to use the device. > So this is actually a "single-seater" as Formula 1. > Vroom vroom! try that http://git.linuxtv.org/cgit.cgi/anttip/media_tree.git/commit/?h=af9015_mxl5007t_1 Antti -- http://palosaari.fi/ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x 2015-05-16 23:07 ` Antti Palosaari @ 2015-05-18 19:15 ` poma 2015-05-21 21:23 ` poma 0 siblings, 1 reply; 12+ messages in thread From: poma @ 2015-05-18 19:15 UTC (permalink / raw) To: Antti Palosaari, linux-media; +Cc: Michael Krufky, Manu Abraham On 17.05.2015 01:07, Antti Palosaari wrote: > > > On 05/13/2015 06:56 AM, poma wrote: >> On 12.05.2015 16:11, Antti Palosaari wrote: >>> On 05/11/2015 09:43 PM, poma wrote: >>>> On 05/11/2015 12:25 AM, poma wrote: >>>>> On 10.05.2015 12:38, poma wrote: >>>>>> On 08.05.2015 12:59, poma wrote: >> Is a beer keg enough as bribe? :) >> Just do not say that you drink juice. >> >> After the reverting of all changes >> http://git.linuxtv.org/cgit.cgi/media_tree.git/log/drivers/media/tuners/mxl5007t.c >> >> device now survives both, 'lsdvb' and rc kernels. >> >> Besides, despite all this, this device is already not working at its full potential. >> One of the tuners can withstand a few hours and then hangs. >> After that, in the application e.g. vlc is needed to select the second tuner and so continue to use the device. >> So this is actually a "single-seater" as Formula 1. >> Vroom vroom! > > try that > http://git.linuxtv.org/cgit.cgi/anttip/media_tree.git/commit/?h=af9015_mxl5007t_1 > > Antti > Thanks. For now, I have noticed, unlike before the EIT program data are updated in full and promptly. I'll be back in a week. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x 2015-05-18 19:15 ` poma @ 2015-05-21 21:23 ` poma 2015-05-26 12:24 ` poma 0 siblings, 1 reply; 12+ messages in thread From: poma @ 2015-05-21 21:23 UTC (permalink / raw) To: Antti Palosaari, linux-media; +Cc: Michael Krufky, Manu Abraham On 18.05.2015 21:15, poma wrote: > On 17.05.2015 01:07, Antti Palosaari wrote: ... >> try that >> http://git.linuxtv.org/cgit.cgi/anttip/media_tree.git/commit/?h=af9015_mxl5007t_1 >> >> Antti >> > > Thanks. > For now, I have noticed, unlike before the EIT program data are updated in full and promptly. > > I'll be back in a week. > > No need to continue to test this patch because this is repeated: BOOT from S5/Soft Off: [ 1.007886] usb 1-2: Product: DVB-T 2 [ 1.032430] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7 [ 1.035255] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/0003:15A4:9016.0001/input/input5 [ 1.089852] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2/input1 [ 13.353105] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state [ 13.557671] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 13.558315] DVB: registering new adapter (Afatech AF9015 reference design) [ 13.726582] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)... [ 13.814649] mxl5007t 13-00c0: creating new instance [ 13.817588] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0 [ 13.820460] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0 [ 13.824594] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 13.825234] DVB: registering new adapter (Afatech AF9015 reference design) [ 14.040582] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)... [ 14.040921] mxl5007t 13-00c0: attaching existing instance [ 14.043201] usb 1-2: dvb_usb_af9015: command failed=1 [ 14.043429] mxl5007t_read_reg: 505: failed! [ 14.043656] mxl5007t_get_chip_id: error -121 on line 824 [ 14.043880] mxl5007t_get_chip_id: unable to identify device @ 13-00c0 [ 14.044698] usb 1-2: dvb_usb_af9015: command failed=1 [ 14.044911] mxl5007t_soft_reset: 527: failed! [ 14.046841] mxl5007t_attach: error -121 on line 914 [ 14.051434] usbcore: registered new interface driver dvb_usb_af9015 $ ls /dev/dvb/ ls: cannot access /dev/dvb/: No such file or directory # modprobe -rv dvb_usb_af9015 mxl5007t rmmod dvb_usb_af9015 rmmod dvb_usb_v2 rmmod rc_core rmmod dvb_core rmmod mxl5007t # modprobe -v dvb_usb_af9015 insmod /lib/modules/4.0.4-502.fc21.x86_64/kernel/drivers/media/rc/rc-core.ko.xz insmod /lib/modules/4.0.4-502.fc21.x86_64/kernel/drivers/media/dvb-core/dvb-core.ko.xz insmod /lib/modules/4.0.4-502.fc21.x86_64/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_v2.ko.xz insmod /lib/modules/4.0.4-502.fc21.x86_64/kernel/drivers/media/usb/dvb-usb-v2/dvb-usb-af9015.ko.xz [ 2101.659729] usbcore: deregistering interface driver dvb_usb_af9015 [ 2117.056136] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state [ 2117.265520] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 2117.265607] DVB: registering new adapter (Afatech AF9015 reference design) [ 2117.268348] i2c i2c-13: af9013: firmware version 5.1.0.0 [ 2117.274958] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)... [ 2117.280031] mxl5007t 13-00c0: creating new instance [ 2117.281700] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0 [ 2117.284211] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0 [ 2117.287208] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 2117.287245] DVB: registering new adapter (Afatech AF9015 reference design) [ 2117.493132] i2c i2c-13: af9013: found a 'Afatech AF9013' in warm state [ 2117.496887] i2c i2c-13: af9013: firmware version 5.1.0.0 [ 2117.504373] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)... [ 2117.504664] mxl5007t 13-00c0: attaching existing instance [ 2117.506848] usb 1-2: dvb_usb_af9015: command failed=1 [ 2117.506858] mxl5007t_read_reg: 505: failed! [ 2117.506864] mxl5007t_get_chip_id: error -121 on line 824 [ 2117.506868] mxl5007t_get_chip_id: unable to identify device @ 13-00c0 [ 2117.507344] usb 1-2: dvb_usb_af9015: command failed=1 [ 2117.507350] mxl5007t_soft_reset: 527: failed! [ 2117.509007] mxl5007t_attach: error -121 on line 914 [ 2117.511150] usbcore: registered new interface driver dvb_usb_af9015 $ ls /dev/dvb/ ls: cannot access /dev/dvb/: No such file or directory REBOOT: [ 1.049265] usb 1-2: Product: DVB-T 2 [ 1.067810] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7 [ 1.068145] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/0003:15A4:9016.0001/input/input5 [ 1.118889] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2/input1 [ 12.023590] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state [ 12.225419] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 12.225524] DVB: registering new adapter (Afatech AF9015 reference design) [ 12.238958] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)... [ 12.261783] mxl5007t 13-00c0: creating new instance [ 12.265081] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0 [ 12.267236] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0 [ 12.270335] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 12.270376] DVB: registering new adapter (Afatech AF9015 reference design) [ 12.484761] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)... [ 12.485016] mxl5007t 13-00c0: attaching existing instance [ 12.487225] usb 1-2: dvb_usb_af9015: command failed=1 [ 12.487251] mxl5007t_read_reg: 505: failed! [ 12.487266] mxl5007t_get_chip_id: error -121 on line 824 [ 12.487281] mxl5007t_get_chip_id: unable to identify device @ 13-00c0 [ 12.487716] usb 1-2: dvb_usb_af9015: command failed=1 [ 12.487753] mxl5007t_soft_reset: 527: failed! [ 12.489363] mxl5007t_attach: error -121 on line 914 [ 12.490589] usbcore: registered new interface driver dvb_usb_af9015 $ ls /dev/dvb ls: cannot access /dev/dvb: No such file or directory $ uname -r 4.0.4-502.fc21.x86_64 ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x 2015-05-21 21:23 ` poma @ 2015-05-26 12:24 ` poma 2015-07-02 23:02 ` poma 0 siblings, 1 reply; 12+ messages in thread From: poma @ 2015-05-26 12:24 UTC (permalink / raw) To: Antti Palosaari, linux-media; +Cc: Michael Krufky, Manu Abraham If it is not taken into account the already known problem of unreliable operation of the first tuner of the two, the device works reliably within kernel 4.0.4 with mxl5007t.ko reverted to http://git.linuxtv.org/cgit.cgi/media_tree.git/commit/drivers/media/tuners/mxl5007t.c?id=ccae7af that is in the same state as is in the longterm kernel - 3.18.14, which is in correspondence with the aforementioned results. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x 2015-05-26 12:24 ` poma @ 2015-07-02 23:02 ` poma 0 siblings, 0 replies; 12+ messages in thread From: poma @ 2015-07-02 23:02 UTC (permalink / raw) To: Antti Palosaari, linux-media Cc: Michael Krufky, Manu Abraham, Mauro Carvalho Chehab, Jose Alberto Reguero On 26.05.2015 14:24, poma wrote: > > If it is not taken into account the already known problem of unreliable operation of the first tuner of the two, > the device works reliably within kernel 4.0.4 with mxl5007t.ko reverted to > http://git.linuxtv.org/cgit.cgi/media_tree.git/commit/drivers/media/tuners/mxl5007t.c?id=ccae7af > that is in the same state as is in the longterm kernel - 3.18.14, > which is in correspondence with the aforementioned results. > > http://git.linuxtv.org/cgit.cgi/media_tree.git/log/drivers/media/tuners/mxl5007t.c 5. 2014-11-11 [media] [PATH,2/2] mxl5007 move loop_thru to attach 02f9cf9 Jose Alberto Reguero 4. 2014-11-11 [media] [PATH,1/2] mxl5007 move reset to attach fe4860a Jose Alberto Reguero 3. 2013-02-08 Revert "[media] [PATH,1/2] mxl5007 move reset to attach" db5c05b Mauro Carvalho Chehab 2. 2013-02-08 [media] [PATH,1/2] mxl5007 move reset to attach 0a32377 Jose Alberto Reguero 1. 2012-08-14 [media] common: move media/common/tuners to media/tuners ccae7af Mauro Carvalho Chehab This is the conclusion after extensive testing, commitas 5. 4. and 2. produce: mxl5007t_soft_reset: 521: failed! mxl5007t_attach: error -121 on line 907 causing the device completely unusable - AF9015 DVB-T USB2.0 stick Do you need a patch to revert to commita 3. or 1. - again for the third time, or you have a better solution? ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2015-07-02 23:02 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-05-08 10:20 dvb_usb_af9015: command failed=1 - stable: 4.0.2 poma 2015-05-08 10:59 ` poma 2015-05-10 10:38 ` dvb_usb_af9015: command failed=1 >= 3.19.x poma 2015-05-10 22:25 ` dvb_usb_af9015: command failed=1 _ lsdvb " poma 2015-05-11 18:43 ` dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x poma 2015-05-12 14:11 ` Antti Palosaari 2015-05-13 3:56 ` poma 2015-05-16 23:07 ` Antti Palosaari 2015-05-18 19:15 ` poma 2015-05-21 21:23 ` poma 2015-05-26 12:24 ` poma 2015-07-02 23:02 ` poma
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).