From: poma <pomidorabelisima@gmail.com>
To: Antti Palosaari <crope@iki.fi>,
linux-media <linux-media@vger.kernel.org>
Cc: Michael Krufky <mkrufky@linuxtv.org>,
Manu Abraham <abraham.manu@gmail.com>
Subject: Re: dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x
Date: Thu, 21 May 2015 23:23:59 +0200 [thread overview]
Message-ID: <555E4CEF.4000901@gmail.com> (raw)
In-Reply-To: <555A3A48.2010002@gmail.com>
On 18.05.2015 21:15, poma wrote:
> On 17.05.2015 01:07, Antti Palosaari wrote:
...
>> try that
>> http://git.linuxtv.org/cgit.cgi/anttip/media_tree.git/commit/?h=af9015_mxl5007t_1
>>
>> Antti
>>
>
> Thanks.
> For now, I have noticed, unlike before the EIT program data are updated in full and promptly.
>
> I'll be back in a week.
>
>
No need to continue to test this patch because this is repeated:
BOOT from S5/Soft Off:
[ 1.007886] usb 1-2: Product: DVB-T 2
[ 1.032430] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
[ 1.035255] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/0003:15A4:9016.0001/input/input5
[ 1.089852] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2/input1
[ 13.353105] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state
[ 13.557671] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 13.558315] DVB: registering new adapter (Afatech AF9015 reference design)
[ 13.726582] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)...
[ 13.814649] mxl5007t 13-00c0: creating new instance
[ 13.817588] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0
[ 13.820460] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0
[ 13.824594] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 13.825234] DVB: registering new adapter (Afatech AF9015 reference design)
[ 14.040582] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)...
[ 14.040921] mxl5007t 13-00c0: attaching existing instance
[ 14.043201] usb 1-2: dvb_usb_af9015: command failed=1
[ 14.043429] mxl5007t_read_reg: 505: failed!
[ 14.043656] mxl5007t_get_chip_id: error -121 on line 824
[ 14.043880] mxl5007t_get_chip_id: unable to identify device @ 13-00c0
[ 14.044698] usb 1-2: dvb_usb_af9015: command failed=1
[ 14.044911] mxl5007t_soft_reset: 527: failed!
[ 14.046841] mxl5007t_attach: error -121 on line 914
[ 14.051434] usbcore: registered new interface driver dvb_usb_af9015
$ ls /dev/dvb/
ls: cannot access /dev/dvb/: No such file or directory
# modprobe -rv dvb_usb_af9015 mxl5007t
rmmod dvb_usb_af9015
rmmod dvb_usb_v2
rmmod rc_core
rmmod dvb_core
rmmod mxl5007t
# modprobe -v dvb_usb_af9015
insmod /lib/modules/4.0.4-502.fc21.x86_64/kernel/drivers/media/rc/rc-core.ko.xz
insmod /lib/modules/4.0.4-502.fc21.x86_64/kernel/drivers/media/dvb-core/dvb-core.ko.xz
insmod /lib/modules/4.0.4-502.fc21.x86_64/kernel/drivers/media/usb/dvb-usb-v2/dvb_usb_v2.ko.xz
insmod /lib/modules/4.0.4-502.fc21.x86_64/kernel/drivers/media/usb/dvb-usb-v2/dvb-usb-af9015.ko.xz
[ 2101.659729] usbcore: deregistering interface driver dvb_usb_af9015
[ 2117.056136] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state
[ 2117.265520] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 2117.265607] DVB: registering new adapter (Afatech AF9015 reference design)
[ 2117.268348] i2c i2c-13: af9013: firmware version 5.1.0.0
[ 2117.274958] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)...
[ 2117.280031] mxl5007t 13-00c0: creating new instance
[ 2117.281700] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0
[ 2117.284211] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0
[ 2117.287208] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 2117.287245] DVB: registering new adapter (Afatech AF9015 reference design)
[ 2117.493132] i2c i2c-13: af9013: found a 'Afatech AF9013' in warm state
[ 2117.496887] i2c i2c-13: af9013: firmware version 5.1.0.0
[ 2117.504373] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)...
[ 2117.504664] mxl5007t 13-00c0: attaching existing instance
[ 2117.506848] usb 1-2: dvb_usb_af9015: command failed=1
[ 2117.506858] mxl5007t_read_reg: 505: failed!
[ 2117.506864] mxl5007t_get_chip_id: error -121 on line 824
[ 2117.506868] mxl5007t_get_chip_id: unable to identify device @ 13-00c0
[ 2117.507344] usb 1-2: dvb_usb_af9015: command failed=1
[ 2117.507350] mxl5007t_soft_reset: 527: failed!
[ 2117.509007] mxl5007t_attach: error -121 on line 914
[ 2117.511150] usbcore: registered new interface driver dvb_usb_af9015
$ ls /dev/dvb/
ls: cannot access /dev/dvb/: No such file or directory
REBOOT:
[ 1.049265] usb 1-2: Product: DVB-T 2
[ 1.067810] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
[ 1.068145] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/0003:15A4:9016.0001/input/input5
[ 1.118889] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2/input1
[ 12.023590] usb 1-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state
[ 12.225419] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 12.225524] DVB: registering new adapter (Afatech AF9015 reference design)
[ 12.238958] usb 1-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)...
[ 12.261783] mxl5007t 13-00c0: creating new instance
[ 12.265081] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0
[ 12.267236] mxl5007t_get_chip_id: MxL5007T.v4 detected @ 13-00c0
[ 12.270335] usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 12.270376] DVB: registering new adapter (Afatech AF9015 reference design)
[ 12.484761] usb 1-2: DVB: registering adapter 1 frontend 0 (Afatech AF9013)...
[ 12.485016] mxl5007t 13-00c0: attaching existing instance
[ 12.487225] usb 1-2: dvb_usb_af9015: command failed=1
[ 12.487251] mxl5007t_read_reg: 505: failed!
[ 12.487266] mxl5007t_get_chip_id: error -121 on line 824
[ 12.487281] mxl5007t_get_chip_id: unable to identify device @ 13-00c0
[ 12.487716] usb 1-2: dvb_usb_af9015: command failed=1
[ 12.487753] mxl5007t_soft_reset: 527: failed!
[ 12.489363] mxl5007t_attach: error -121 on line 914
[ 12.490589] usbcore: registered new interface driver dvb_usb_af9015
$ ls /dev/dvb
ls: cannot access /dev/dvb: No such file or directory
$ uname -r
4.0.4-502.fc21.x86_64
next prev parent reply other threads:[~2015-05-21 21:24 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-08 10:20 dvb_usb_af9015: command failed=1 - stable: 4.0.2 poma
2015-05-08 10:59 ` poma
2015-05-10 10:38 ` dvb_usb_af9015: command failed=1 >= 3.19.x poma
2015-05-10 22:25 ` dvb_usb_af9015: command failed=1 _ lsdvb " poma
2015-05-11 18:43 ` dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x poma
2015-05-12 14:11 ` Antti Palosaari
2015-05-13 3:56 ` poma
2015-05-16 23:07 ` Antti Palosaari
2015-05-18 19:15 ` poma
2015-05-21 21:23 ` poma [this message]
2015-05-26 12:24 ` poma
2015-07-02 23:02 ` poma
-- strict thread matches above, loose matches on Subject: below --
2015-07-06 20:17 Jose Alberto Reguero
2015-07-07 8:48 ` poma
2015-07-13 9:48 ` poma
2015-07-31 15:03 ` poma
[not found] ` <CAAZRmGym49dG6Jj-ZeKZmy0rgr4ozph7-ggjLoWtGOvT1m4oBA@mail.gmail.com>
2015-08-10 21:46 ` poma
2015-08-10 22:40 ` Antti Palosaari
2015-08-12 23:52 ` poma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=555E4CEF.4000901@gmail.com \
--to=pomidorabelisima@gmail.com \
--cc=abraham.manu@gmail.com \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=mkrufky@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).