From: Jouni Karvo <Jouni.Karvo@iki.fi>
To: linux-media@vger.kernel.org
Subject: cx23885 risc op code error with DvbSKY T982
Date: Sun, 21 Jun 2015 21:19:00 +0300 [thread overview]
Message-ID: <55870014.90902@iki.fi> (raw)
I have dvbsky T982. The firmware is up to date from openelec site. Nothing on the CI slot
Linux xpc 4.1.0-rc8 #2 SMP Sun Jun 21 11:16:21 EEST 2015 x86_64 x86_64 x86_64 GNU/Linux
I run the kernel in ubuntu
dmesg from the startup
[ 16.427634] CORE cx23885[0]: subsystem: 4254:0982, board: DVBSky T982 [card=51,autodetected]
[ 17.275820] cx23885_dvb_register() allocating 1 frontend(s)
[ 17.275822] cx23885[0]: cx23885 based dvb card
[ 17.281850] DVB: registering new adapter (cx23885[0])
[ 17.281853] cx23885 0000:01:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[ 17.308303] DVBSky T982 port 1 MAC address: 00:17:42:54:09:87
[ 17.308304] cx23885_dvb_register() allocating 1 frontend(s)
[ 17.308305] cx23885[0]: cx23885 based dvb card
[ 17.310640] DVB: registering new adapter (cx23885[0])
And /var/log/kern.log from the event.
Jun 21 16:44:03 xpc kernel: [ 9793.748543] cx23885[0]: mpeg risc op code error
Jun 21 16:44:03 xpc kernel: [ 9793.748548] cx23885[0]: TS2 C - dma channel status dump
Jun 21 16:44:03 xpc kernel: [ 9793.748550] cx23885[0]: cmds: init risc lo : 0x78b76000
Jun 21 16:44:03 xpc kernel: [ 9793.748552] cx23885[0]: cmds: init risc hi : 0x00000000
Jun 21 16:44:03 xpc kernel: [ 9793.748554] cx23885[0]: cmds: cdt base : 0x000105e0
Jun 21 16:44:03 xpc kernel: [ 9793.748556] cx23885[0]: cmds: cdt size : 0x0000000a
Jun 21 16:44:03 xpc kernel: [ 9793.748558] cx23885[0]: cmds: iq base : 0x00010440
Jun 21 16:44:03 xpc kernel: [ 9793.748560] cx23885[0]: cmds: iq size : 0x00000010
Jun 21 16:44:03 xpc kernel: [ 9793.748562] cx23885[0]: cmds: risc pc lo : 0x78b76004
Jun 21 16:44:03 xpc kernel: [ 9793.748564] cx23885[0]: cmds: risc pc hi : 0x00000000
Jun 21 16:44:03 xpc kernel: [ 9793.748566] cx23885[0]: cmds: iq wr ptr : 0x00004111
Jun 21 16:44:03 xpc kernel: [ 9793.748568] cx23885[0]: cmds: iq rd ptr : 0x00004110
Jun 21 16:44:03 xpc kernel: [ 9793.748570] cx23885[0]: cmds: cdt current : 0x00010628
Jun 21 16:44:03 xpc kernel: [ 9793.748572] cx23885[0]: cmds: pci target lo : 0x4b9a42f0
Jun 21 16:44:03 xpc kernel: [ 9793.748574] cx23885[0]: cmds: pci target hi : 0x00000000
Jun 21 16:44:03 xpc kernel: [ 9793.748576] cx23885[0]: cmds: line / byte : 0x02610000
Jun 21 16:44:03 xpc kernel: [ 9793.748578] cx23885[0]: risc0: 0x1c0002f0 [ write sol eol count=752 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748582] cx23885[0]: risc1: 0x4b9a42f0 [ INVALID sol irq2 irq1 23 20 19 cnt1 14 count=752 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748587] cx23885[0]: risc2: 0x00000000 [ INVALID count=0 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748589] cx23885[0]: risc3: 0x1c0002f0 [ write sol eol count=752 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748592] cx23885[0]: (0x00010440) iq 0: 0x003fb002 [ INVALID 21 20 19 18 cnt1 cnt0 resync 13 12 count=2 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748597] cx23885[0]: (0x00010444) iq 1: 0x4b9a4000 [ INVALID sol irq2 irq1 23 20 19 cnt1 14 count=0 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748601] cx23885[0]: (0x00010448) iq 2: 0x00000000 [ INVALID count=0 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748603] cx23885[0]: (0x0001044c) iq 3: 0x1c0002f0 [ write sol eol count=752 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748606] cx23885[0]: iq 4: 0x4b9a42f0 [ arg #1 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748608] cx23885[0]: iq 5: 0x00000000 [ arg #2 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748610] cx23885[0]: (0x00010458) iq 6: 0x1c0002f0 [ write sol eol count=752 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748613] cx23885[0]: iq 7: 0x4b9a45e0 [ arg #1 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748615] cx23885[0]: iq 8: 0x00000000 [ arg #2 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748617] cx23885[0]: (0x00010464) iq 9: 0x1c0002f0 [ write sol eol count=752 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748620] cx23885[0]: iq a: 0x4b9a48d0 [ arg #1 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748623] cx23885[0]: iq b: 0x00000000 [ arg #2 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748625] cx23885[0]: (0x00010470) iq c: 0x1c0002f0 [ write sol eol count=752 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748628] cx23885[0]: iq d: 0x4b9a4bc0 [ arg #1 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748629] cx23885[0]: iq e: 0x00000000 [ arg #2 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748631] cx23885[0]: (0x0001047c) iq f: 0x71000000 [ jump irq1 count=0 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748634] cx23885[0]: iq 10: 0x0af829b7 [ arg #1 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748636] cx23885[0]: iq 11: 0x7bf7a9f0 [ arg #2 ]
Jun 21 16:44:03 xpc kernel: [ 9793.748637] cx23885[0]: fifo: 0x00006000 -> 0x7000
Jun 21 16:44:03 xpc kernel: [ 9793.748638] cx23885[0]: ctrl: 0x00010440 -> 0x104a0
Jun 21 16:44:03 xpc kernel: [ 9793.748640] cx23885[0]: ptr1_reg: 0x00006be0
Jun 21 16:44:03 xpc kernel: [ 9793.748642] cx23885[0]: ptr2_reg: 0x00010628
Jun 21 16:44:03 xpc kernel: [ 9793.748643] cx23885[0]: cnt1_reg: 0x00000002
Jun 21 16:44:03 xpc kernel: [ 9793.748645] cx23885[0]: cnt2_reg: 0x00000001
yours,
Jouni
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
next reply other threads:[~2015-06-21 18:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-21 18:19 Jouni Karvo [this message]
2015-06-22 9:43 ` cx23885 risc op code error with DvbSKY T982 Jouni Karvo
2015-06-22 9:55 ` Tycho Lürsen
2015-06-29 9:39 ` Jouni Karvo
2015-07-01 9:11 ` Jouni Karvo
2015-07-01 9:13 ` Hans Verkuil
2015-07-01 10:06 ` Jouni Karvo
2015-06-22 12:00 ` Jouni Karvo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55870014.90902@iki.fi \
--to=jouni.karvo@iki.fi \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox