From: poma <pomidorabelisima@gmail.com>
To: For testing and quality assurance of Fedora releases
<test@lists.fedoraproject.org>
Cc: linux-media <linux-media@vger.kernel.org>,
Development discussions related to Fedora
<devel@lists.fedoraproject.org>,
Kevin Thayer <nufan_wfk@yahoo.com>, Chris Kennedy <c@groovy.org>,
Hans Verkuil <hans.verkuil@cisco.com>,
Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
Ben Hutchings <ben@decadent.org.uk>,
Josh Boyer <jwboyer@redhat.com>,
Richard Vollkommer <linux@hauppauge.com>,
Fred Richter <frichter@hauppauge.com>,
Hauppauge Tech Support <support@hauppauge.com>
Subject: ivtv - firmware - v4l-cx2341x*.fw - Upstream & Fedora
Date: Sun, 21 Jun 2015 23:47:42 +0200 [thread overview]
Message-ID: <558730FE.1030700@gmail.com> (raw)
Háu kola
$ lspci -d 4444:0016 -knn
01:08.0 Multimedia video controller [0400]: Internext Compression Inc iTVC16 (CX23416) Video Decoder [4444:0016] (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 150 [0070:8801]
Kernel driver in use: ivtv
Kernel modules: ivtv
~~~~~~~~~~~~~~~~~~~~
$ dmesg | grep ivtv
[ 10.082881] ivtv: Start initialization, version 1.4.3
[ 10.085644] ivtv0: Initializing card 0
[ 10.088287] ivtv0: Autodetected Hauppauge card (cx23416 based)
[ 10.094502] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 10.183374] ivtv0: Autodetected Hauppauge WinTV PVR-150
[ 10.240409] cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
[ 10.380617] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
[ 10.431991] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 10.432151] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 10.432256] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 10.432358] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 10.432459] ivtv0: Registered device radio0 for encoder radio
[ 10.432473] ivtv0: Initialized card: Hauppauge WinTV PVR-150
[ 10.433869] ivtv: End initialization
[ 11.820105] ivtv 0000:01:08.0: Direct firmware load for v4l-cx2341x-enc.fw failed with error -2
[ 11.820119] ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
[ 11.820124] ivtv0: Did you put the firmware in the hotplug firmware directory?
[ 11.820129] ivtv0: Retry loading firmware
[ 12.439735] ivtv 0000:01:08.0: Direct firmware load for v4l-cx2341x-enc.fw failed with error -2
[ 12.439747] ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
[ 12.439752] ivtv0: Did you put the firmware in the hotplug firmware directory?
[ 12.439757] ivtv0: Failed to initialize on device video32
[ 12.439788] ivtv0: Failed to initialize on device video0
[ 12.439953] ivtv0: Failed to initialize on device vbi0
[ 12.439968] ivtv0: Failed to initialize on device video24
[ 12.440110] ivtv0: Failed to initialize on device radio0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
$ modinfo ivtv | grep 'author\|firmware'
author: Kevin Thayer, Chris Kennedy, Hans Verkuil
firmware: v4l-cx2341x-init.mpg
firmware: v4l-cx2341x-dec.fw
firmware: v4l-cx2341x-enc.fw
~~~~~~~~~~~~~~~~~~~~~~~~
$ rpm -qi linux-firmware
...
Packager : Fedora Project
Vendor : Fedora Project
...
Summary : Firmware files used by the Linux kernel
Description :
This package includes firmware files required for some devices to
operate.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
$ rpm -ql linux-firmware | grep v4l-cx2341x
$
~~~~~~~~~~~~~~~~~~~~~~~~~~~
# yum install ivtv-firmware
...
No package ivtv-firmware available.
Error: Nothing to do
~~~~~~~~~~~~~~~~~~~~
$ rpm -qilp https://kojipkgs.fedoraproject.org/packages/ivtv-firmware/20080701/26/noarch/ivtv-firmware-20080701-26.noarch.rpm
Name : ivtv-firmware
Epoch : 2
Version : 20080701
Release : 26
Architecture: noarch
Install Date: (not installed)
Group : System Environment/Kernel
Size : 857256
License : Redistributable, no modification permitted
Signature : (none)
Source RPM : ivtv-firmware-20080701-26.src.rpm
Build Date : Sun 08 Jun 2014 05:38:45 AM CEST
Build Host : buildvm-11.phx2.fedoraproject.org
Relocations : (not relocatable)
Packager : Fedora Project
Vendor : Fedora Project
URL : http://dl.ivtvdriver.org/ivtv/firmware/
Summary : Firmware for the Hauppauge PVR 250/350/150/500/USB2 model series
Description :
This package contains the firmware for WinTV Hauppauge PVR
250/350/150/500/USB2 cards.
/lib/firmware/ivtv-firmware-license-end-user.txt
/lib/firmware/ivtv-firmware-license-oemihvisv.txt
/lib/firmware/v4l-cx2341x-dec.fw
/lib/firmware/v4l-cx2341x-enc.fw
/lib/firmware/v4l-cx2341x-init.mpg
/lib/firmware/v4l-cx25840.fw
/lib/firmware/v4l-pvrusb2-24xxx-01.fw
/lib/firmware/v4l-pvrusb2-29xxx-01.fw
/usr/share/doc/ivtv-firmware
/usr/share/doc/ivtv-firmware/license-end-user.txt
/usr/share/doc/ivtv-firmware/license-oemihvisv.txt
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Why these firmwares are not included upstream
http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/
?
Why these firmwares are obsoleted(?) downstream
http://pkgs.fedoraproject.org/cgit/ivtv-firmware.git
?
Why these firmware are not included downstream
http://pkgs.fedoraproject.org/cgit/linux-firmware.git
?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
next reply other threads:[~2015-06-21 21:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-21 21:47 poma [this message]
2015-06-22 12:13 ` ivtv - firmware - v4l-cx2341x*.fw - Upstream & Fedora Mauro Carvalho Chehab
2015-06-22 12:20 ` Mauro Carvalho Chehab
2015-06-22 15:44 ` poma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=558730FE.1030700@gmail.com \
--to=pomidorabelisima@gmail.com \
--cc=ben@decadent.org.uk \
--cc=c@groovy.org \
--cc=devel@lists.fedoraproject.org \
--cc=frichter@hauppauge.com \
--cc=hans.verkuil@cisco.com \
--cc=jwboyer@redhat.com \
--cc=linux-media@vger.kernel.org \
--cc=linux@hauppauge.com \
--cc=mchehab@osg.samsung.com \
--cc=nufan_wfk@yahoo.com \
--cc=support@hauppauge.com \
--cc=test@lists.fedoraproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).