From: poma <pomidorabelisima@gmail.com>
To: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: For testing and quality assurance of Fedora releases
<test@lists.fedoraproject.org>,
linux-media <linux-media@vger.kernel.org>,
Development discussions related to Fedora
<devel@lists.fedoraproject.org>,
Kevin Thayer <nufan_wfk@yahoo.com>, Chris Kennedy <c@groovy.org>,
Hans Verkuil <hans.verkuil@cisco.com>,
Ben Hutchings <ben@decadent.org.uk>,
Josh Boyer <jwboyer@redhat.com>,
Richard Vollkommer <linux@hauppauge.com>,
Fred Richter <frichter@hauppauge.com>,
Hauppauge Tech Support <support@hauppauge.com>
Subject: Re: ivtv - firmware - v4l-cx2341x*.fw - Upstream & Fedora
Date: Mon, 22 Jun 2015 17:44:37 +0200 [thread overview]
Message-ID: <55882D65.8020400@gmail.com> (raw)
In-Reply-To: <20150622092001.6c3b9350@recife.lan>
On 22.06.2015 14:20, Mauro Carvalho Chehab wrote:
> (please disregard my last e-mail - I pressed, by mistake, some control sequence
> to send it before finishing it)
>
> Hi,
>
> Em Sun, 21 Jun 2015 23:47:42 +0200
> poma <pomidorabelisima@gmail.com> escreveu:
>
>>
>> Háu kola
>>
>>
>> $ lspci -d 4444:0016 -knn
>> 01:08.0 Multimedia video controller [0400]: Internext Compression Inc iTVC16 (CX23416) Video Decoder [4444:0016] (rev 01)
>> Subsystem: Hauppauge computer works Inc. WinTV PVR 150 [0070:8801]
>> Kernel driver in use: ivtv
>> Kernel modules: ivtv
>>
>> ~~~~~~~~~~~~~~~~~~~~
>>
>> $ dmesg | grep ivtv
>> [ 10.082881] ivtv: Start initialization, version 1.4.3
>> [ 10.085644] ivtv0: Initializing card 0
>> [ 10.088287] ivtv0: Autodetected Hauppauge card (cx23416 based)
>> [ 10.094502] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
>> [ 10.183374] ivtv0: Autodetected Hauppauge WinTV PVR-150
>> [ 10.240409] cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
>> [ 10.380617] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
>> [ 10.431991] ivtv0: Registered device video0 for encoder MPG (4096 kB)
>> [ 10.432151] ivtv0: Registered device video32 for encoder YUV (2048 kB)
>> [ 10.432256] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
>> [ 10.432358] ivtv0: Registered device video24 for encoder PCM (320 kB)
>> [ 10.432459] ivtv0: Registered device radio0 for encoder radio
>> [ 10.432473] ivtv0: Initialized card: Hauppauge WinTV PVR-150
>> [ 10.433869] ivtv: End initialization
>> [ 11.820105] ivtv 0000:01:08.0: Direct firmware load for v4l-cx2341x-enc.fw failed with error -2
>> [ 11.820119] ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
>> [ 11.820124] ivtv0: Did you put the firmware in the hotplug firmware directory?
>> [ 11.820129] ivtv0: Retry loading firmware
>> [ 12.439735] ivtv 0000:01:08.0: Direct firmware load for v4l-cx2341x-enc.fw failed with error -2
>> [ 12.439747] ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
>> [ 12.439752] ivtv0: Did you put the firmware in the hotplug firmware directory?
>> [ 12.439757] ivtv0: Failed to initialize on device video32
>> [ 12.439788] ivtv0: Failed to initialize on device video0
>> [ 12.439953] ivtv0: Failed to initialize on device vbi0
>> [ 12.439968] ivtv0: Failed to initialize on device video24
>> [ 12.440110] ivtv0: Failed to initialize on device radio0
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> $ modinfo ivtv | grep 'author\|firmware'
>> author: Kevin Thayer, Chris Kennedy, Hans Verkuil
>> firmware: v4l-cx2341x-init.mpg
>> firmware: v4l-cx2341x-dec.fw
>> firmware: v4l-cx2341x-enc.fw
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> $ rpm -qi linux-firmware
>> ...
>> Packager : Fedora Project
>> Vendor : Fedora Project
>> ...
>> Summary : Firmware files used by the Linux kernel
>> Description :
>> This package includes firmware files required for some devices to
>> operate.
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> $ rpm -ql linux-firmware | grep v4l-cx2341x
>> $
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> # yum install ivtv-firmware
>> ...
>> No package ivtv-firmware available.
>> Error: Nothing to do
>>
>> ~~~~~~~~~~~~~~~~~~~~
>>
>> $ rpm -qilp https://kojipkgs.fedoraproject.org/packages/ivtv-firmware/20080701/26/noarch/ivtv-firmware-20080701-26.noarch.rpm
>> Name : ivtv-firmware
>> Epoch : 2
>> Version : 20080701
>> Release : 26
>> Architecture: noarch
>> Install Date: (not installed)
>> Group : System Environment/Kernel
>> Size : 857256
>> License : Redistributable, no modification permitted
>> Signature : (none)
>> Source RPM : ivtv-firmware-20080701-26.src.rpm
>> Build Date : Sun 08 Jun 2014 05:38:45 AM CEST
>> Build Host : buildvm-11.phx2.fedoraproject.org
>> Relocations : (not relocatable)
>> Packager : Fedora Project
>> Vendor : Fedora Project
>> URL : http://dl.ivtvdriver.org/ivtv/firmware/
>> Summary : Firmware for the Hauppauge PVR 250/350/150/500/USB2 model series
>> Description :
>> This package contains the firmware for WinTV Hauppauge PVR
>> 250/350/150/500/USB2 cards.
>> /lib/firmware/ivtv-firmware-license-end-user.txt
>> /lib/firmware/ivtv-firmware-license-oemihvisv.txt
>> /lib/firmware/v4l-cx2341x-dec.fw
>> /lib/firmware/v4l-cx2341x-enc.fw
>> /lib/firmware/v4l-cx2341x-init.mpg
>> /lib/firmware/v4l-cx25840.fw
>> /lib/firmware/v4l-pvrusb2-24xxx-01.fw
>> /lib/firmware/v4l-pvrusb2-29xxx-01.fw
>> /usr/share/doc/ivtv-firmware
>> /usr/share/doc/ivtv-firmware/license-end-user.txt
>> /usr/share/doc/ivtv-firmware/license-oemihvisv.txt
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> Why these firmwares are not included upstream
>> http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/
>> ?
>>
>> Why these firmwares are obsoleted(?) downstream
>> http://pkgs.fedoraproject.org/cgit/ivtv-firmware.git
>> ?
>>
>> Why these firmware are not included downstream
>> http://pkgs.fedoraproject.org/cgit/linux-firmware.git
>> ?
>
> I've no idea who tagged the ivtv-firmware package as obsoleted.
>
> The status of the firmwares is that almost all ivtv firmwares
> are part of linux-firmware. However, we didn't manage to get
> an ack from Conexant (or Hauppauge) to release a few firmwares
> using a license that would allow redistribution. The problem
> is that those firmwares are for hardware that are discontinued
> by the chipset manufacturer.
>
> So, those should still be released using the license that
> was granted on this package.
>
> So, IMO, those files should be kept at the package:
> /lib/firmware/ivtv-firmware-license-end-user.txt
> /lib/firmware/ivtv-firmware-license-oemihvisv.txt
> /lib/firmware/v4l-cx2341x-enc.fw
> /lib/firmware/v4l-pvrusb2-24xxx-01.fw
> /lib/firmware/v4l-pvrusb2-29xxx-01.fw
> /usr/share/doc/ivtv-firmware
> /usr/share/doc/ivtv-firmware/license-end-user.txt
> /usr/share/doc/ivtv-firmware/license-oemihvisv.txt
>
> The other files should be replaced by the ones at linux-firmware,
> with has a better license that allows redistribution.
>
> Regards,
> Mauro
>
Thanks for your reply.
These two "firmwares" are also needed, right:
- v4l-cx2341x-dec.fw : CX23415 decoder part
- v4l-cx2341x-init.mpg : decoder initializer
Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-350
Are there any technical or legal issues for all these firmware files not to be included downstream within "linux-firmware" package, with the rest of firmwares?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
prev parent reply other threads:[~2015-06-22 15:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-21 21:47 ivtv - firmware - v4l-cx2341x*.fw - Upstream & Fedora poma
2015-06-22 12:13 ` Mauro Carvalho Chehab
2015-06-22 12:20 ` Mauro Carvalho Chehab
2015-06-22 15:44 ` poma [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55882D65.8020400@gmail.com \
--to=pomidorabelisima@gmail.com \
--cc=ben@decadent.org.uk \
--cc=c@groovy.org \
--cc=devel@lists.fedoraproject.org \
--cc=frichter@hauppauge.com \
--cc=hans.verkuil@cisco.com \
--cc=jwboyer@redhat.com \
--cc=linux-media@vger.kernel.org \
--cc=linux@hauppauge.com \
--cc=mchehab@osg.samsung.com \
--cc=nufan_wfk@yahoo.com \
--cc=support@hauppauge.com \
--cc=test@lists.fedoraproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).