From: Jouni Karvo <Jouni.Karvo@iki.fi>
To: "Tycho Lürsen" <tycholursen@gmail.com>, linux-media@vger.kernel.org
Subject: Re: cx23885 risc op code error with DvbSKY T982
Date: Wed, 01 Jul 2015 12:11:02 +0300 [thread overview]
Message-ID: <5593AEA6.7020901@iki.fi> (raw)
In-Reply-To: <55911239.4000709@iki.fi>
29.06.2015, 12:39, Jouni Karvo kirjoitti:
> 22.06.2015, 12:55, Tycho Lürsen kirjoitti:
>> I've got a couple of T982 cards. Running Debian Jessie, with kernel
>> 4.1-rc8, I cannot reproduce your errors.
>> Only difference might be:
>> I synced the silabs drivers with upstream and used the patch from:
>
> hi,
>
> I tested with 4.1.0 (which produced the errors. 4.1.0 with
> media_build produced the errors. I did not test that with the patch,
> as because of another kernel bug (in mdraid) I switched to 4.0.6.
>
> With 4.0.6 this error does not seem to happen with neither card.
Just as I reported, it happened. Then I got the media_build driver from
Jun 25 (which seems to include the IF selection patch), and there it
happens again...
Jun 30 21:16:40 xpc kernel: [11870.833240] cx23885[1]: mpeg risc op code
error
Jun 30 21:16:40 xpc kernel: [11870.833244] cx23885[1]: TS1 B - dma
channel status dump
Jun 30 21:16:40 xpc kernel: [11870.833247] cx23885[1]: cmds: init risc
lo : 0x924d0000
Jun 30 21:16:40 xpc kernel: [11870.833248] cx23885[1]: cmds: init risc
hi : 0x00000000
Jun 30 21:16:40 xpc kernel: [11870.833250] cx23885[1]: cmds: cdt
base : 0x00010580
Jun 30 21:16:40 xpc kernel: [11870.833252] cx23885[1]: cmds: cdt
size : 0x0000000a
Jun 30 21:16:40 xpc kernel: [11870.833254] cx23885[1]: cmds: iq
base : 0x00010400
Jun 30 21:16:40 xpc kernel: [11870.833256] cx23885[1]: cmds: iq
size : 0x00000010
Jun 30 21:16:40 xpc kernel: [11870.833257] cx23885[1]: cmds: risc pc
lo : 0x924d000c
Jun 30 21:16:40 xpc kernel: [11870.833259] cx23885[1]: cmds: risc pc
hi : 0x00000000
Jun 30 21:16:40 xpc kernel: [11870.833261] cx23885[1]: cmds: iq wr
ptr : 0x00004103
Jun 30 21:16:40 xpc kernel: [11870.833263] cx23885[1]: cmds: iq rd
ptr : 0x00004100
Jun 30 21:16:40 xpc kernel: [11870.833264] cx23885[1]: cmds: cdt
current : 0x000105c8
Jun 30 21:16:40 xpc kernel: [11870.833266] cx23885[1]: cmds: pci
target lo : 0xaed882f0
Jun 30 21:16:40 xpc kernel: [11870.833268] cx23885[1]: cmds: pci
target hi : 0x00000000
Jun 30 21:16:40 xpc kernel: [11870.833270] cx23885[1]: cmds: line /
byte : 0x01610000
Jun 30 21:16:40 xpc kernel: [11870.833272] cx23885[1]: risc0:
0x1c0002f0 [ write sol eol count=752 ]
Jun 30 21:16:40 xpc kernel: [11870.833275] cx23885[1]: risc1:
0xaed882f0 [ readc sol eol irq2 23 22 20 19 resync count=752 ]
Jun 30 21:16:40 xpc kernel: [11870.833279] cx23885[1]: risc2:
0x00000000 [ INVALID count=0 ]
Jun 30 21:16:40 xpc kernel: [11870.833281] cx23885[1]: risc3:
0x1c0002f0 [ write sol eol count=752 ]
Jun 30 21:16:40 xpc kernel: [11870.833284] cx23885[1]: (0x00010400) iq
0: 0x80200080 [ sync 21 count=128 ]
Jun 30 21:16:40 xpc kernel: [11870.833286] cx23885[1]: (0x00010404) iq
1: 0x87ff3140 [ sync eol irq2 irq1 23 22 21 20 19 18 cnt1 cnt0 13 12
count=320 ]
Jun 30 21:16:40 xpc kernel: [11870.833291] cx23885[1]: (0x00010408) iq
2: 0x01000000 [ INVALID irq1 count=0 ]
Jun 30 21:16:40 xpc kernel: [11870.833293] cx23885[1]: (0x0001040c) iq
3: 0x00000000 [ INVALID count=0 ]
Jun 30 21:16:40 xpc kernel: [11870.833295] cx23885[1]: (0x00010410) iq
4: 0x1c0002f0 [ write sol eol count=752 ]
Jun 30 21:16:40 xpc kernel: [11870.833298] cx23885[1]: iq 5:
0xaed88bc0 [ arg #1 ]
Jun 30 21:16:40 xpc kernel: [11870.833300] cx23885[1]: iq 6:
0x00000000 [ arg #2 ]
Jun 30 21:16:40 xpc kernel: [11870.833301] cx23885[1]: (0x0001041c) iq
7: 0x71000000 [ jump irq1 count=0 ]
Jun 30 21:16:40 xpc kernel: [11870.833304] cx23885[1]: iq 8:
0x1c0002f0 [ arg #1 ]
Jun 30 21:16:40 xpc kernel: [11870.833306] cx23885[1]: iq 9:
0xaed88000 [ arg #2 ]
Jun 30 21:16:40 xpc kernel: [11870.833307] cx23885[1]: (0x00010428) iq
a: 0x00000000 [ INVALID count=0 ]
Jun 30 21:16:40 xpc kernel: [11870.833309] cx23885[1]: (0x0001042c) iq
b: 0x1c0002f0 [ write sol eol count=752 ]
Jun 30 21:16:40 xpc kernel: [11870.833312] cx23885[1]: iq c:
0xaed882f0 [ arg #1 ]
Jun 30 21:16:40 xpc kernel: [11870.833314] cx23885[1]: iq d:
0x00000000 [ arg #2 ]
Jun 30 21:16:40 xpc kernel: [11870.833315] cx23885[1]: (0x00010438) iq
e: 0x1c0002f0 [ write sol eol count=752 ]
Jun 30 21:16:40 xpc kernel: [11870.833318] cx23885[1]: iq f:
0xaed885e0 [ arg #1 ]
Jun 30 21:16:40 xpc kernel: [11870.833320] cx23885[1]: iq 10:
0x9beae2ae [ arg #2 ]
Jun 30 21:16:40 xpc kernel: [11870.833320] cx23885[1]: fifo: 0x00005000
-> 0x6000
Jun 30 21:16:40 xpc kernel: [11870.833321] cx23885[1]: ctrl: 0x00010400
-> 0x10460
Jun 30 21:16:40 xpc kernel: [11870.833323] cx23885[1]: ptr1_reg:
0x00005bf0
Jun 30 21:16:40 xpc kernel: [11870.833325] cx23885[1]: ptr2_reg:
0x000105c8
Jun 30 21:16:40 xpc kernel: [11870.833326] cx23885[1]: cnt1_reg:
0x00000003
Jun 30 21:16:40 xpc kernel: [11870.833328] cx23885[1]: cnt2_reg:
0x00000001
next prev parent reply other threads:[~2015-07-01 9:11 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-21 18:19 cx23885 risc op code error with DvbSKY T982 Jouni Karvo
2015-06-22 9:43 ` Jouni Karvo
2015-06-22 9:55 ` Tycho Lürsen
2015-06-29 9:39 ` Jouni Karvo
2015-07-01 9:11 ` Jouni Karvo [this message]
2015-07-01 9:13 ` Hans Verkuil
2015-07-01 10:06 ` Jouni Karvo
2015-06-22 12:00 ` Jouni Karvo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5593AEA6.7020901@iki.fi \
--to=jouni.karvo@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=tycholursen@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox