linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: poma <pomidorabelisima@gmail.com>
To: Antti Palosaari <crope@iki.fi>, Olli Salonen <olli.salonen@iki.fi>
Cc: linux-media <linux-media@vger.kernel.org>,
	Jose Alberto Reguero <jareguero@telefonica.net>,
	Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Subject: Re: dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x
Date: Thu, 13 Aug 2015 01:52:11 +0200	[thread overview]
Message-ID: <55CBDC2B.9080309@gmail.com> (raw)
In-Reply-To: <55C92879.5020306@iki.fi>

On 11.08.2015 00:40, Antti Palosaari wrote:
> On 08/11/2015 12:46 AM, poma wrote:
>> Furthermore, to fix this issue - AF9015 DVB-T USB2.0 stick brokenness - is the responsibility of developers.
>> I am here only proven tester.
>>
>> I hope we understand each other, and this problem will be resolved in good faith.
> 
> Your patches are implemented wrong.


Talk about deflecting.

The patch that you called "my" is nothing but two reverted commitas:

- 02f9cf96df57575acea2e6eb4041e9f3ecd32548
  "[media] [PATH,2/2] mxl5007 move loop_thru to attach"
- fe4860af002a4516dd878f7297b61e186c475b35
  "[media] [PATH,1/2] mxl5007 move reset to attach"

Besides the author, Jose Alberto Reguero does not oppose to revert them, due to the trouble they cause.

> 
> When I added mxl5007t support to that driver it was DigitalNow TinyTwin 
> v2 I had. The rest mxl5007t dual devices using reference design IDs went 
> to same due to reason driver detects used tuner. My device is still 
> working fine, which means your device has different wiring. As 2nd tuner 
> attach fails it means there is communication loss to tuner. Which means 
> tuner is most likely hold in a reset attach time or there is some I2C 
> gating which prevents communication.
> 
> Patches you sent will introduce another issue. For dual tuner 
> configuration there could be antenna wired from tuner chip to another. 
> After that patch you will lose antenna signal from 2nd tuner on cases 
> where tuner antenna wire is loop through master tuner to slave.
> 
> So fix it correctly. Find out reason there is communication loss to 2nd 
> tuner on attach time. I cannot do much as I simply don't have such 
> hardware. And I really do not care to take any responsibility when that 
> kind of issues happens - it is not my job to bough every single device 
> from the market in able to test and fix every hardware combination.
> 
> 
> Antti
> 

You very well know that I am not a developer, 
Therefore I believe this above what you write is addressed to yourself,
after all *you* are a developer, a capable one, right.

Are you?



  reply	other threads:[~2015-08-12 23:52 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-06 20:17 dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x Jose Alberto Reguero
2015-07-07  8:48 ` poma
2015-07-13  9:48   ` poma
2015-07-31 15:03     ` poma
     [not found]       ` <CAAZRmGym49dG6Jj-ZeKZmy0rgr4ozph7-ggjLoWtGOvT1m4oBA@mail.gmail.com>
2015-08-10 21:46         ` poma
2015-08-10 22:40           ` Antti Palosaari
2015-08-12 23:52             ` poma [this message]
  -- strict thread matches above, loose matches on Subject: below --
2015-05-08 10:20 dvb_usb_af9015: command failed=1 - stable: 4.0.2 poma
2015-05-08 10:59 ` poma
2015-05-10 10:38   ` dvb_usb_af9015: command failed=1 >= 3.19.x poma
2015-05-10 22:25     ` dvb_usb_af9015: command failed=1 _ lsdvb " poma
2015-05-11 18:43       ` dvb_usb_af9015: command failed=1 _ kernel >= 4.1.x poma
2015-05-12 14:11         ` Antti Palosaari
2015-05-13  3:56           ` poma
2015-05-16 23:07             ` Antti Palosaari
2015-05-18 19:15               ` poma
2015-05-21 21:23                 ` poma
2015-05-26 12:24                   ` poma
2015-07-02 23:02                     ` poma

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55CBDC2B.9080309@gmail.com \
    --to=pomidorabelisima@gmail.com \
    --cc=crope@iki.fi \
    --cc=jareguero@telefonica.net \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@osg.samsung.com \
    --cc=olli.salonen@iki.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).