From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from lb2-smtp-cloud3.xs4all.net ([194.109.24.26]:59899 "EHLO lb2-smtp-cloud3.xs4all.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751794AbbH1NYg (ORCPT ); Fri, 28 Aug 2015 09:24:36 -0400 Message-ID: <55E060DF.3030202@xs4all.nl> Date: Fri, 28 Aug 2015 15:23:43 +0200 From: Hans Verkuil MIME-Version: 1.0 To: Steven Toth CC: Ricardo Ribalda Delgado , Linux Media Mailing List Subject: Re: [PATCH] saa7164: convert to the control framework References: <55D730F4.80100@xs4all.nl> <55D85325.80607@xs4all.nl> <55D86F3C.6090004@xs4all.nl> <55DDBB73.5010902@xs4all.nl> <55E014E6.5000801@xs4all.nl> In-Reply-To: Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: On 08/28/2015 02:44 PM, Steven Toth wrote: >>> Send me your shipping address _privately_, I talk to Hauppauge about a >>> replacement. >>> >> >> No need, I managed to get it working if I use a PCI-to-PCIe adapter card. Very >> strange, it won't work in the PCIe slot of my motherboard, but using the PCI slot >> and that adapter it works fine. > > Excellent. > >> >> It's good that it was tested since the menu control creation code was wrong. > > Ahh. > >> >> One thing that is very confusing to me: I have this board: >> >> [ 1878.280918] CORE saa7164[0]: subsystem: 0070:8900, board: Hauppauge WinTV-HVR2200 [card=5,autodetected] >> [ 1878.280928] saa7164[0]/0: found at 0000:09:00.0, rev: 129, irq: 18, latency: 0, mmio: 0xfb800000 >> [ 1878.327399] tveeprom 14-0000: Hauppauge model 89519, rev B2F2, serial# 4029789519 >> [ 1878.327405] tveeprom 14-0000: MAC address is 00:0d:fe:31:b5:4f >> [ 1878.327409] tveeprom 14-0000: tuner model is NXP 18271C2_716x (idx 152, type 4) >> [ 1878.327413] tveeprom 14-0000: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) >> [ 1878.327416] tveeprom 14-0000: audio processor is SAA7164 (idx 43) >> [ 1878.327418] tveeprom 14-0000: decoder processor is CX23887A (idx 39) >> [ 1878.327420] tveeprom 14-0000: has radio >> [ 1878.327423] saa7164[0]: Hauppauge eeprom: model=89519 >> >> but the default firmware with size 4919072 fails to work (image corrupt), instead >> I need to use the firmware with size 4038864 (v4l-saa7164-1.0.3-3.fw). >> >> For that I have to patch the driver. > > Take a look at your board, on the main large PCIe IC, its probably > marked as either a REV2 or a REV3, or a -02 or -03, what do you have? > > I suspect you have a rev-02 chip. Not many of them go out into > production. (A few thousand, compared to significantly more -03 > chips). The text on the chip is: SAA7164E/2 P60962.00 10 ESG07271Y I suspect the /2 means REV2. Regards, Hans