linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Tycho Lürsen" <tycholursen@gmail.com>
To: Christoph Hellwig <hch@lst.de>
Cc: LMML <linux-media@vger.kernel.org>
Subject: Re: cx23885: use pci_set_dma_mask insted of pci_dma_supported
Date: Wed, 18 Nov 2015 19:28:28 +0100	[thread overview]
Message-ID: <564CC34C.3060903@gmail.com> (raw)
In-Reply-To: <564CA89F.4030306@gmail.com>

Hi Christoph,
that additional patch fixed the problem indeed.
Thanks again.

Regards, Tycho

Op 18-11-15 om 17:34 schreef Tycho Lürsen:
> Hi Christoph,
> thanks, will do and report back shortly.
>
> Op 18-11-15 om 16:08 schreef Christoph Hellwig:
>> Hi Tycho,
>>
>> please try the patch below - Andrew should be sending it on to Linux 
>> soon.
>>
>> ---
>>  From 4c03a9f77104b04af45833e0424954191ca94a12 Mon Sep 17 00:00:00 2001
>> From: Christoph Hellwig <hch@lst.de>
>> Date: Wed, 11 Nov 2015 18:13:09 +0100
>> Subject: various: fix pci_set_dma_mask return value checking
>>
>> pci_set_dma_mask returns a negative errno value, not a bool
>> like pci_dma_supported.  This of course was just a giant test
>> for attention :)
>>
>> Reported-by: Jongman Heo <jongman.heo@samsung.com>
>> Tested-by: Jongman Heo <jongman.heo@samsung.com> [pcnet32]
>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>> ---
>>   drivers/media/pci/cx23885/cx23885-core.c           | 4 ++--
>>   drivers/media/pci/cx25821/cx25821-core.c           | 3 ++-
>>   drivers/media/pci/cx88/cx88-alsa.c                 | 4 ++--
>>   drivers/media/pci/cx88/cx88-mpeg.c                 | 3 ++-
>>   drivers/media/pci/cx88/cx88-video.c                | 4 ++--
>>   drivers/media/pci/netup_unidvb/netup_unidvb_core.c | 2 +-
>>   drivers/media/pci/saa7134/saa7134-core.c           | 4 ++--
>>   drivers/media/pci/saa7164/saa7164-core.c           | 4 ++--
>>   drivers/media/pci/tw68/tw68-core.c                 | 4 ++--
>>   drivers/net/ethernet/amd/pcnet32.c                 | 5 +++--
>>   10 files changed, 20 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/media/pci/cx23885/cx23885-core.c 
>> b/drivers/media/pci/cx23885/cx23885-core.c
>> index 35759a9..e8f8472 100644
>> --- a/drivers/media/pci/cx23885/cx23885-core.c
>> +++ b/drivers/media/pci/cx23885/cx23885-core.c
>> @@ -1992,9 +1992,9 @@ static int cx23885_initdev(struct pci_dev 
>> *pci_dev,
>>           (unsigned long long)pci_resource_start(pci_dev, 0));
>>         pci_set_master(pci_dev);
>> -    if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
>> +    err = pci_set_dma_mask(pci_dev, 0xffffffff);
>> +    if (err) {
>>           printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
>> -        err = -EIO;
>>           goto fail_context;
>>       }
>>   diff --git a/drivers/media/pci/cx25821/cx25821-core.c 
>> b/drivers/media/pci/cx25821/cx25821-core.c
>> index dbc695f..0042803 100644
>> --- a/drivers/media/pci/cx25821/cx25821-core.c
>> +++ b/drivers/media/pci/cx25821/cx25821-core.c
>> @@ -1319,7 +1319,8 @@ static int cx25821_initdev(struct pci_dev 
>> *pci_dev,
>>           dev->pci_lat, (unsigned long long)dev->base_io_addr);
>>         pci_set_master(pci_dev);
>> -    if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
>> +    err = pci_set_dma_mask(pci_dev, 0xffffffff);
>> +    if (err) {
>>           pr_err("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
>>           err = -EIO;
>>           goto fail_irq;
>> diff --git a/drivers/media/pci/cx88/cx88-alsa.c 
>> b/drivers/media/pci/cx88/cx88-alsa.c
>> index 0ed1b65..1b5268f 100644
>> --- a/drivers/media/pci/cx88/cx88-alsa.c
>> +++ b/drivers/media/pci/cx88/cx88-alsa.c
>> @@ -890,9 +890,9 @@ static int snd_cx88_create(struct snd_card *card, 
>> struct pci_dev *pci,
>>           return err;
>>       }
>>   -    if (!pci_set_dma_mask(pci,DMA_BIT_MASK(32))) {
>> +    err = pci_set_dma_mask(pci,DMA_BIT_MASK(32));
>> +    if (err) {
>>           dprintk(0, "%s/1: Oops: no 32bit PCI DMA ???\n",core->name);
>> -        err = -EIO;
>>           cx88_core_put(core, pci);
>>           return err;
>>       }
>> diff --git a/drivers/media/pci/cx88/cx88-mpeg.c 
>> b/drivers/media/pci/cx88/cx88-mpeg.c
>> index 9db7767..f34c229 100644
>> --- a/drivers/media/pci/cx88/cx88-mpeg.c
>> +++ b/drivers/media/pci/cx88/cx88-mpeg.c
>> @@ -393,7 +393,8 @@ static int cx8802_init_common(struct cx8802_dev 
>> *dev)
>>       if (pci_enable_device(dev->pci))
>>           return -EIO;
>>       pci_set_master(dev->pci);
>> -    if (!pci_set_dma_mask(dev->pci,DMA_BIT_MASK(32))) {
>> +    err = pci_set_dma_mask(dev->pci,DMA_BIT_MASK(32));
>> +    if (err) {
>>           printk("%s/2: Oops: no 32bit PCI DMA ???\n",dev->core->name);
>>           return -EIO;
>>       }
>> diff --git a/drivers/media/pci/cx88/cx88-video.c 
>> b/drivers/media/pci/cx88/cx88-video.c
>> index 0de1ad5..aef9acf 100644
>> --- a/drivers/media/pci/cx88/cx88-video.c
>> +++ b/drivers/media/pci/cx88/cx88-video.c
>> @@ -1314,9 +1314,9 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
>>              dev->pci_lat,(unsigned long 
>> long)pci_resource_start(pci_dev,0));
>>         pci_set_master(pci_dev);
>> -    if (!pci_set_dma_mask(pci_dev,DMA_BIT_MASK(32))) {
>> +    err = pci_set_dma_mask(pci_dev,DMA_BIT_MASK(32));
>> +    if (err) {
>>           printk("%s/0: Oops: no 32bit PCI DMA ???\n",core->name);
>> -        err = -EIO;
>>           goto fail_core;
>>       }
>>       dev->alloc_ctx = vb2_dma_sg_init_ctx(&pci_dev->dev);
>> diff --git a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c 
>> b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
>> index 60b2d46..3fdbd81 100644
>> --- a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
>> +++ b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
>> @@ -810,7 +810,7 @@ static int netup_unidvb_initdev(struct pci_dev 
>> *pci_dev,
>>           "%s(): board vendor 0x%x, revision 0x%x\n",
>>           __func__, board_vendor, board_revision);
>>       pci_set_master(pci_dev);
>> -    if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
>> +    if (pci_set_dma_mask(pci_dev, 0xffffffff) < 0) {
>>           dev_err(&pci_dev->dev,
>>               "%s(): 32bit PCI DMA is not supported\n", __func__);
>>           goto pci_detect_err;
>> diff --git a/drivers/media/pci/saa7134/saa7134-core.c 
>> b/drivers/media/pci/saa7134/saa7134-core.c
>> index e79d63e..f720cea 100644
>> --- a/drivers/media/pci/saa7134/saa7134-core.c
>> +++ b/drivers/media/pci/saa7134/saa7134-core.c
>> @@ -951,9 +951,9 @@ static int saa7134_initdev(struct pci_dev *pci_dev,
>>              pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
>>              dev->pci_lat,(unsigned long 
>> long)pci_resource_start(pci_dev,0));
>>       pci_set_master(pci_dev);
>> -    if (!pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32))) {
>> +    err = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
>> +    if (err) {
>>           pr_warn("%s: Oops: no 32bit PCI DMA ???\n", dev->name);
>> -        err = -EIO;
>>           goto fail1;
>>       }
>>   diff --git a/drivers/media/pci/saa7164/saa7164-core.c 
>> b/drivers/media/pci/saa7164/saa7164-core.c
>> index 8f36b48..8bbd092 100644
>> --- a/drivers/media/pci/saa7164/saa7164-core.c
>> +++ b/drivers/media/pci/saa7164/saa7164-core.c
>> @@ -1264,9 +1264,9 @@ static int saa7164_initdev(struct pci_dev 
>> *pci_dev,
>>         pci_set_master(pci_dev);
>>       /* TODO */
>> -    if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
>> +    err = pci_set_dma_mask(pci_dev, 0xffffffff);
>> +    if (err) {
>>           printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
>> -        err = -EIO;
>>           goto fail_irq;
>>       }
>>   diff --git a/drivers/media/pci/tw68/tw68-core.c 
>> b/drivers/media/pci/tw68/tw68-core.c
>> index 8c5655d..4e77618 100644
>> --- a/drivers/media/pci/tw68/tw68-core.c
>> +++ b/drivers/media/pci/tw68/tw68-core.c
>> @@ -257,9 +257,9 @@ static int tw68_initdev(struct pci_dev *pci_dev,
>>           dev->name, pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
>>           dev->pci_lat, (u64)pci_resource_start(pci_dev, 0));
>>       pci_set_master(pci_dev);
>> -    if (!pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32))) {
>> +    err = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
>> +    if (err) {
>>           pr_info("%s: Oops: no 32bit PCI DMA ???\n", dev->name);
>> -        err = -EIO;
>>           goto fail1;
>>       }
>>   diff --git a/drivers/net/ethernet/amd/pcnet32.c 
>> b/drivers/net/ethernet/amd/pcnet32.c
>> index e2afabf..7ccebae 100644
>> --- a/drivers/net/ethernet/amd/pcnet32.c
>> +++ b/drivers/net/ethernet/amd/pcnet32.c
>> @@ -1500,10 +1500,11 @@ pcnet32_probe_pci(struct pci_dev *pdev, const 
>> struct pci_device_id *ent)
>>           return -ENODEV;
>>       }
>>   -    if (!pci_set_dma_mask(pdev, PCNET32_DMA_MASK)) {
>> +    err = pci_set_dma_mask(pdev, PCNET32_DMA_MASK);
>> +    if (err) {
>>           if (pcnet32_debug & NETIF_MSG_PROBE)
>>               pr_err("architecture does not support 32bit PCI 
>> busmaster DMA\n");
>> -        return -ENODEV;
>> +        return err;
>>       }
>>       if (!request_region(ioaddr, PCNET32_TOTAL_SIZE, 
>> "pcnet32_probe_pci")) {
>>           if (pcnet32_debug & NETIF_MSG_PROBE)
>


      reply	other threads:[~2015-11-18 18:28 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-12 19:53 [ANNOUNCE DRAFT] Kernel Summit Media Workshop 2015 report - Seoul Mauro Carvalho Chehab
2015-11-18 11:21 ` Mauro Carvalho Chehab
2015-11-18 13:58   ` cx23885: use pci_set_dma_mask insted of pci_dma_supported Tycho Lürsen
2015-11-18 15:08     ` Christoph Hellwig
2015-11-18 16:34       ` Tycho Lürsen
2015-11-18 18:28         ` Tycho Lürsen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=564CC34C.3060903@gmail.com \
    --to=tycholursen@gmail.com \
    --cc=hch@lst.de \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).