From: "Stefan Pöschel" <basic.master@gmx.de>
To: Linux Media Mailing List <linux-media@vger.kernel.org>
Subject: Re: [PATCH] af9035: add support for 2nd tuner of MSI DigiVox Diversity
Date: Mon, 25 Jan 2016 20:54:02 +0100 [thread overview]
Message-ID: <56A67D5A.2000205@gmx.de> (raw)
In-Reply-To: <569928B0.9060703@gmx.de>
OK, I guess some further details might help here:
The MSI DigiVox Diversity (USB DVB-T stick) has two tuners and is
promoted with diversity function. I can confirm both features working
under Windows.
The stick also works out-of-the-box under a more or less recent kernel -
however only one tuner/DVB adapter is recognized and added.
Therefore I sniffed the stick initialisation via USB under Windows and
stepwise compared the I²C writing/reading with another dump of the stick
init under Linux. It turned out that the regarding EEPROM register of
the stick has a different value than the two present ones, to announce
that it has two tuners and diversity.
After adding the new value of 5 to the regarding IF clauses, the second
tuner is recognized and added as a second DVB adapter.
To verify the tuners working independent from each other, I used VLC
with the --dvb-adapter param and tuned to different DVB-T muxes. Both
tuners worked at the same time without problems.
Though the diversity feature does not seem to work yet; as far as I
understand there are hardly kernel drivers supporting this...
Regards,
Stefan
Am 15.01.2016 um 18:13 schrieb Stefan Pöschel:
> Hi,
>
> I just wanted to ask if there is any further information needed regarding my patch.
>
> Best regards,
> Stefan
>
> Am 04.01.2016 um 22:16 schrieb Stefan Pöschel:
>> PIP tested with VLC. Diversity tested with the Windows driver.
>>
>> Signed-off-by: Stefan Pöschel <basic.master@gmx.de>
>> ---
>> drivers/media/usb/dvb-usb-v2/af9035.c | 4 ++--
>> drivers/media/usb/dvb-usb-v2/af9035.h | 3 ++-
>> 2 files changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
>> index 6e02a15..b3c09fe 100644
>> --- a/drivers/media/usb/dvb-usb-v2/af9035.c
>> +++ b/drivers/media/usb/dvb-usb-v2/af9035.c
>> @@ -684,7 +684,7 @@ static int af9035_download_firmware(struct dvb_usb_device *d,
>> if (ret < 0)
>> goto err;
>>
>> - if (tmp =1 || tmp == 3) {
>> + if (tmp =1 || tmp == 3 || tmp == 5) {
>> /* configure gpioh1, reset & power slave demod */
>> ret =f9035_wr_reg_mask(d, 0x00d8b0, 0x01, 0x01);
>> if (ret < 0)
>> @@ -823,7 +823,7 @@ static int af9035_read_config(struct dvb_usb_device *d)
>> if (ret < 0)
>> goto err;
>>
>> - if (tmp =1 || tmp == 3)
>> + if (tmp =1 || tmp == 3 || tmp == 5)
>> state->dual_mode =rue;
>>
>> dev_dbg(&d->udev->dev, "%s: ts mode= dual mode=%d\n", __func__,
>> diff --git a/drivers/media/usb/dvb-usb-v2/af9035.h b/drivers/media/usb/dvb-usb-v2/af9035.h
>> index 416a97f..df22001 100644
>> --- a/drivers/media/usb/dvb-usb-v2/af9035.h
>> +++ b/drivers/media/usb/dvb-usb-v2/af9035.h
>> @@ -112,9 +112,10 @@ static const u32 clock_lut_it9135[] =
>> * 0 TS
>> * 1 DCA + PIP
>> * 3 PIP
>> + * 5 DCA + PIP
>> * n DCA
>> *
>> - * Values 0 and 3 are seen to this day. 0 for single TS and 3 for dual TS.
>> + * Values 0, 3 and 5 are seen to this day. 0 for single TS and 3/5 for dual TS.
>> */
>>
>> #define EEPROM_BASE_AF9035 0x42fd
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
prev parent reply other threads:[~2016-01-25 19:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-04 21:16 [PATCH] af9035: add support for 2nd tuner of MSI DigiVox Diversity Stefan Pöschel
2016-01-15 17:13 ` Stefan Pöschel
2016-01-25 19:54 ` Stefan Pöschel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56A67D5A.2000205@gmx.de \
--to=basic.master@gmx.de \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).