* [PATCH] tc358743: use - instead of non-ascii wide-dash character
@ 2016-02-20 8:48 Hans Verkuil
0 siblings, 0 replies; only message in thread
From: Hans Verkuil @ 2016-02-20 8:48 UTC (permalink / raw)
To: Linux Media Mailing List; +Cc: Mats Randgaard (matrandg)
smatch complains about non-ascii characters. It turns out that a wide-dash character
was used instead of the more common '-' character.
Replace those dashes with -.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c
index da7469b..972e0d4 100644
--- a/drivers/media/i2c/tc358743.c
+++ b/drivers/media/i2c/tc358743.c
@@ -1198,21 +1198,21 @@ static int tc358743_log_status(struct v4l2_subdev *sd)
#ifdef CONFIG_VIDEO_ADV_DEBUG
static void tc358743_print_register_map(struct v4l2_subdev *sd)
{
- v4l2_info(sd, "0x0000–0x00FF: Global Control Register\n");
- v4l2_info(sd, "0x0100–0x01FF: CSI2-TX PHY Register\n");
- v4l2_info(sd, "0x0200–0x03FF: CSI2-TX PPI Register\n");
- v4l2_info(sd, "0x0400–0x05FF: Reserved\n");
- v4l2_info(sd, "0x0600–0x06FF: CEC Register\n");
- v4l2_info(sd, "0x0700–0x84FF: Reserved\n");
- v4l2_info(sd, "0x8500–0x85FF: HDMIRX System Control Register\n");
- v4l2_info(sd, "0x8600–0x86FF: HDMIRX Audio Control Register\n");
- v4l2_info(sd, "0x8700–0x87FF: HDMIRX InfoFrame packet data Register\n");
- v4l2_info(sd, "0x8800–0x88FF: HDMIRX HDCP Port Register\n");
- v4l2_info(sd, "0x8900–0x89FF: HDMIRX Video Output Port & 3D Register\n");
- v4l2_info(sd, "0x8A00–0x8BFF: Reserved\n");
- v4l2_info(sd, "0x8C00–0x8FFF: HDMIRX EDID-RAM (1024bytes)\n");
- v4l2_info(sd, "0x9000–0x90FF: HDMIRX GBD Extraction Control\n");
- v4l2_info(sd, "0x9100–0x92FF: HDMIRX GBD RAM read\n");
+ v4l2_info(sd, "0x0000-0x00FF: Global Control Register\n");
+ v4l2_info(sd, "0x0100-0x01FF: CSI2-TX PHY Register\n");
+ v4l2_info(sd, "0x0200-0x03FF: CSI2-TX PPI Register\n");
+ v4l2_info(sd, "0x0400-0x05FF: Reserved\n");
+ v4l2_info(sd, "0x0600-0x06FF: CEC Register\n");
+ v4l2_info(sd, "0x0700-0x84FF: Reserved\n");
+ v4l2_info(sd, "0x8500-0x85FF: HDMIRX System Control Register\n");
+ v4l2_info(sd, "0x8600-0x86FF: HDMIRX Audio Control Register\n");
+ v4l2_info(sd, "0x8700-0x87FF: HDMIRX InfoFrame packet data Register\n");
+ v4l2_info(sd, "0x8800-0x88FF: HDMIRX HDCP Port Register\n");
+ v4l2_info(sd, "0x8900-0x89FF: HDMIRX Video Output Port & 3D Register\n");
+ v4l2_info(sd, "0x8A00-0x8BFF: Reserved\n");
+ v4l2_info(sd, "0x8C00-0x8FFF: HDMIRX EDID-RAM (1024bytes)\n");
+ v4l2_info(sd, "0x9000-0x90FF: HDMIRX GBD Extraction Control\n");
+ v4l2_info(sd, "0x9100-0x92FF: HDMIRX GBD RAM read\n");
v4l2_info(sd, "0x9300- : Reserved\n");
}
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2016-02-20 8:48 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-20 8:48 [PATCH] tc358743: use - instead of non-ascii wide-dash character Hans Verkuil
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox