From: Shuah Khan <shuahkh@osg.samsung.com>
To: Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
Linux Media Mailing List <linux-media@vger.kernel.org>
Cc: "Mauro Carvalho Chehab" <mchehab@infradead.org>,
"Hans Verkuil" <hans.verkuil@cisco.com>,
"Rafael Lourenço de Lima Chehab" <chehabrafael@gmail.com>,
"Javier Martinez Canillas" <javier@osg.samsung.com>,
"Shuah Khan" <shuahkh@osg.samsung.com>
Subject: Re: [PATCH 1/2] [media] au0828: disable tuner links and cache tuner/decoder
Date: Fri, 11 Mar 2016 09:27:40 -0700 [thread overview]
Message-ID: <56E2F1FC.1080405@osg.samsung.com> (raw)
In-Reply-To: <d14f3141901856eaed358ab049f4a3aac8fe4863.1457711514.git.mchehab@osg.samsung.com>
On 03/11/2016 08:55 AM, Mauro Carvalho Chehab wrote:
> For au0828_enable_source() to work, the tuner links should be
> disabled and the tuner/decoder should be cached at au0828 struct.
hmm. are you sure about needing to cache decoder in au0828 struct.
It gets cached in au0828_card_analog_fe_setup() which is called
from au0828_card_setup() - this step happens before
au0828_media_device_register()
#ifdef CONFIG_MEDIA_CONTROLLER
if (sd)
dev->decoder = &sd->entity;
#endif
thanks,
-- Shuah
>
> Fixes: 9822f4173f84 ('[media] au0828: use v4l2_mc_create_media_graph()')
> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
> ---
> drivers/media/usb/au0828/au0828-core.c | 42 ++++++++++++++++++++++------------
> 1 file changed, 27 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/media/usb/au0828/au0828-core.c b/drivers/media/usb/au0828/au0828-core.c
> index 5dc82e8c8670..ecfa18939663 100644
> --- a/drivers/media/usb/au0828/au0828-core.c
> +++ b/drivers/media/usb/au0828/au0828-core.c
> @@ -456,7 +456,8 @@ static int au0828_media_device_register(struct au0828_dev *dev,
> {
> #ifdef CONFIG_MEDIA_CONTROLLER
> int ret;
> - struct media_entity *entity, *demod = NULL, *tuner = NULL;
> + struct media_entity *entity, *demod = NULL;
> + struct media_link *link;
>
> if (!dev->media_dev)
> return 0;
> @@ -482,26 +483,37 @@ static int au0828_media_device_register(struct au0828_dev *dev,
> }
>
> /*
> - * Find tuner and demod to disable the link between
> - * the two to avoid disable step when tuner is requested
> - * by video or audio. Note that this step can't be done
> - * until dvb graph is created during dvb register.
> + * Find tuner, decoder and demod.
> + *
> + * The tuner and decoder should be cached, as they'll be used by
> + * au0828_enable_source.
> + *
> + * It also needs to disable the link between tuner and
> + * decoder/demod, to avoid disable step when tuner is requested
> + * by video or audio. Note that this step can't be done until dvb
> + * graph is created during dvb register.
> */
> media_device_for_each_entity(entity, dev->media_dev) {
> - if (entity->function == MEDIA_ENT_F_DTV_DEMOD)
> + switch (entity->function) {
> + case MEDIA_ENT_F_TUNER:
> + dev->tuner = entity;
> + break;
> + case MEDIA_ENT_F_ATV_DECODER:
> + dev->decoder = entity;
> + break;
> + case MEDIA_ENT_F_DTV_DEMOD:
> demod = entity;
> - else if (entity->function == MEDIA_ENT_F_TUNER)
> - tuner = entity;
> + break;
> + }
> }
> - /* Disable link between tuner and demod */
> - if (tuner && demod) {
> - struct media_link *link;
>
> - list_for_each_entry(link, &demod->links, list) {
> - if (link->sink->entity == demod &&
> - link->source->entity == tuner) {
> + /* Disable link between tuner->demod and/or tuner->decoder */
> + if (dev->tuner) {
> + list_for_each_entry(link, &dev->tuner->links, list) {
> + if (demod && link->sink->entity == demod)
> + media_entity_setup_link(link, 0);
> + if (dev->decoder && link->sink->entity == dev->decoder)
> media_entity_setup_link(link, 0);
> - }
> }
> }
>
>
--
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@osg.samsung.com | (970) 217-8978
next prev parent reply other threads:[~2016-03-11 16:27 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-11 15:55 [PATCH 1/2] [media] au0828: disable tuner links and cache tuner/decoder Mauro Carvalho Chehab
2016-03-11 15:55 ` [PATCH 2/2] [media] v4l2-mc: cleanup a warning Mauro Carvalho Chehab
2016-03-11 16:27 ` Shuah Khan [this message]
2016-03-11 16:34 ` [PATCH 1/2] [media] au0828: disable tuner links and cache tuner/decoder Mauro Carvalho Chehab
2016-03-11 16:52 ` Shuah Khan
2016-03-11 16:55 ` Shuah Khan
2016-03-11 19:02 ` [PATCH 1/2 v2] " Mauro Carvalho Chehab
2016-03-12 23:52 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56E2F1FC.1080405@osg.samsung.com \
--to=shuahkh@osg.samsung.com \
--cc=chehabrafael@gmail.com \
--cc=hans.verkuil@cisco.com \
--cc=javier@osg.samsung.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@infradead.org \
--cc=mchehab@osg.samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox