linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
To: Sebastian Reichel <sre@kernel.org>
Cc: sakari.ailus@iki.fi, pali.rohar@gmail.com, pavel@ucw.cz,
	linux-media@vger.kernel.org
Subject: Re: [RFC PATCH 00/24] Make Nokia N900 cameras working
Date: Wed, 27 Apr 2016 08:05:48 +0300	[thread overview]
Message-ID: <572048AC.7050700@gmail.com> (raw)
In-Reply-To: <20160427030850.GA17034@earth>

Hi,

On 27.04.2016 06:08, Sebastian Reichel wrote:
> Hi,
>
> On Mon, Apr 25, 2016 at 12:08:00AM +0300, Ivaylo Dimitrov wrote:
>> Those patch series make cameras on Nokia N900 partially working.
>> Some more patches are needed, but I've already sent them for
>> upstreaming so they are not part of the series:
>>
>> https://lkml.org/lkml/2016/4/16/14
>> https://lkml.org/lkml/2016/4/16/33
>>
>> As omap3isp driver supports only one endpoint on ccp2 interface,
>> but cameras on N900 require different strobe settings, so far
>> it is not possible to have both cameras correctly working with
>> the same board DTS. DTS patch in the series has the correct
>> settings for the front camera. This is a problem still to be
>> solved.
>>
>> The needed pipeline could be made with:
>>
>> media-ctl -r
>> media-ctl -l '"vs6555 binner 2-0010":1 -> "video-bus-switch":2 [1]'
>> media-ctl -l '"video-bus-switch":0 -> "OMAP3 ISP CCP2":0 [1]'
>> media-ctl -l '"OMAP3 ISP CCP2":1 -> "OMAP3 ISP CCDC":0 [1]'
>> media-ctl -l '"OMAP3 ISP CCDC":2 -> "OMAP3 ISP preview":0 [1]'
>> media-ctl -l '"OMAP3 ISP preview":1 -> "OMAP3 ISP resizer":0 [1]'
>> media-ctl -l '"OMAP3 ISP resizer":1 -> "OMAP3 ISP resizer output":0 [1]'
>> media-ctl -V '"vs6555 pixel array 2-0010":0 [SGRBG10/648x488 (0,0)/648x488 (0,0)/648x488]'
>> media-ctl -V '"vs6555 binner 2-0010":1 [SGRBG10/648x488 (0,0)/648x488 (0,0)/648x488]'
>> media-ctl -V '"OMAP3 ISP CCP2":0 [SGRBG10 648x488]'
>> media-ctl -V '"OMAP3 ISP CCP2":1 [SGRBG10 648x488]'
>> media-ctl -V '"OMAP3 ISP CCDC":2 [SGRBG10 648x488]'
>> media-ctl -V '"OMAP3 ISP preview":1 [UYVY 648x488]'
>> media-ctl -V '"OMAP3 ISP resizer":1 [UYVY 656x488]'
>>
>> and tested with:
>>
>> mplayer -tv driver=v4l2:width=656:height=488:outfmt=uyvy:device=/dev/video6 -vo xv -vf screenshot tv://
>
> 4.6-rc4 + twl regulator patch + the patches mentioned above + this
> patchset (I put everything together here [0]) do _not_ work for me.
> The error matches what I have seen when I was working on it: No
> image data seems to be received by the ISP. For example there are
> no related IRQs:
>
> root@n900:~# cat /proc/interrupts  | grep ISP
>   40:          0      INTC  24 Edge      480bd400.mmu, OMAP3 ISP
>
> I tested with mpv and yavta (yavta --capture=8 --pause --skip 0
> --format UYVY --size 656x488 /dev/video6)
>
> [0] https://git.kernel.org/cgit/linux/kernel/git/sre/linux-n900.git/log/?h=n900-camera-ivo
>

Ok, going to diff with my tree to see what I have missed to send in the 
patchset

Thanks

  reply	other threads:[~2016-04-27  5:05 UTC|newest]

Thread overview: 102+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20160420081427.GZ32125@valkosipuli.retiisi.org.uk>
2016-04-24 21:08 ` [RFC PATCH 00/24] Make Nokia N900 cameras working Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 01/24] V4L fixes Ivaylo Dimitrov
2016-04-24 22:05     ` Pavel Machek
2016-04-25  7:29     ` Hans Verkuil
2016-04-25 13:25     ` Sakari Ailus
2016-04-25 16:32       ` Ivaylo Dimitrov
2016-04-29  7:41         ` Sakari Ailus
2016-04-24 21:08   ` [RFC PATCH 02/24] smiaregs: Generic i2c register writing Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 03/24] et8ek8: Toshiba 5MP sensor driver Ivaylo Dimitrov
2016-05-01 10:44     ` Sakari Ailus
2016-05-01 12:31       ` Ivaylo Dimitrov
2016-05-01 12:32         ` Ivaylo Dimitrov
2016-05-01 12:50       ` Ivaylo Dimitrov
2016-05-01 13:41         ` Sakari Ailus
2016-05-03 14:50           ` [PATCH] [media]: Driver for Toshiba et8ek8 5MP sensor Ivaylo Dimitrov
2016-05-22 10:07             ` Ivaylo Dimitrov
2016-05-24 11:19             ` Pavel Machek
2016-06-04 19:16               ` Ivaylo Dimitrov
2016-06-06  9:04               ` Sylwester Nawrocki
2016-05-25 21:45             ` Sakari Ailus
2016-06-04 19:54               ` Ivaylo Dimitrov
2016-06-09 23:13                 ` Sakari Ailus
2016-04-24 21:08   ` [RFC PATCH 04/24] smiapp-pll: Take existing divisor into account in minimum divisor check Ivaylo Dimitrov
2016-05-01 10:45     ` Sakari Ailus
2016-05-03 18:25       ` Ivaylo Dimitrov
2016-05-24  9:09       ` Pali Rohár
2016-05-24 10:17     ` Pavel Machek
2016-04-24 21:08   ` [RFC PATCH 05/24] smiapp: Add smiapp_has_quirk() to tell whether a quirk is implemented Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 06/24] smiapp: Add quirk control support Ivaylo Dimitrov
2016-05-01 10:46     ` Sakari Ailus
2016-05-03 18:32       ` Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 07/24] v4l: of: Call CSI2 bus csi2, not csi Ivaylo Dimitrov
2016-04-29 13:22     ` Pavel Machek
2016-04-24 21:08   ` [RFC PATCH 08/24] v4l: of: Obtain data bus type from bus-type property Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 09/24] v4l: Add CSI1 and CCP2 bus type to enum v4l2_mbus_type Ivaylo Dimitrov
2016-04-29 13:27     ` Pavel Machek
2016-04-24 21:08   ` [RFC PATCH 10/24] v4l: of: Separate lane parsing from CSI-2 bus parameter parsing Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 11/24] dt: bindings: v4l: Add bus-type video interface property Ivaylo Dimitrov
2016-04-29 13:28     ` Pavel Machek
2016-04-24 21:08   ` [RFC PATCH 12/24] dt: bindings: Add CSI1/CCP2 related properties to video-interfaces.txt Ivaylo Dimitrov
2016-04-29 13:39     ` Pavel Machek
2016-04-24 21:08   ` [RFC PATCH 13/24] v4l: of: Support CSI-1 and CCP2 busses Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 14/24] media: et8ek8: add device tree binding document Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 15/24] media: add subdev type for bus switch Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 16/24] media: video-bus-switch: new driver Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 17/24] smiapp: add CCP2 support Ivaylo Dimitrov
2016-05-01 10:57     ` Sakari Ailus
2016-04-24 21:08   ` [RFC PATCH 18/24] v4l2-async: per notifier locking Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 19/24] v4l2_device_register_subdev_nodes: allow calling multiple times Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 20/24] ARM: dts: omap3-n900: enable cameras Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 21/24] omap3isp: dt: Add support for CSI1/CCP2 busses Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 22/24] [media] omap3isp: Correctly set IO_OUT_SEL and VP_CLK_POL for CCP2 mode Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 23/24] [media] omap3isp: Make sure CSI1 interface is enabled in CPP2 mode Ivaylo Dimitrov
2016-04-24 21:08   ` [RFC PATCH 24/24] ARM: dts: omap3-n900: enable cameras - remove invalid entry Ivaylo Dimitrov
2016-04-24 21:55   ` [RFC PATCH 00/24] Make Nokia N900 cameras working Pavel Machek
2016-04-25  6:33     ` Ivaylo Dimitrov
2016-04-25 17:09       ` Pavel Machek
2016-04-25 17:21         ` Ivaylo Dimitrov
2016-04-27 21:07           ` Pavel Machek
2016-04-25 10:40   ` Pali Rohár
2016-04-25 14:06     ` Pavel Machek
2016-04-25 14:09       ` Hans Verkuil
2016-04-27 21:09         ` Pavel Machek
2016-04-25 14:14       ` Pali Rohár
2016-04-25 17:14         ` Pali Rohár
2016-04-25 16:58   ` Pavel Machek
2016-04-25 17:17     ` Ivaylo Dimitrov
2016-04-25 18:40       ` Pavel Machek
2016-04-25 19:17         ` Ivaylo Dimitrov
2016-04-25 20:41           ` Pavel Machek
2016-04-25 20:53             ` Ivaylo Dimitrov
2016-04-25 22:07               ` Pavel Machek
2016-04-26  4:21                 ` Ivaylo Dimitrov
2016-04-27  8:30                   ` Pavel Machek
2016-04-27  3:08   ` Sebastian Reichel
2016-04-27  5:05     ` Ivaylo Dimitrov [this message]
2016-04-27  6:57       ` Ivaylo Dimitrov
2016-04-27 16:42         ` Sebastian Reichel
2016-04-27 16:45           ` Pavel Machek
2016-04-27 16:59             ` Sebastian Reichel
2016-05-02  7:06               ` Pavel Machek
2016-04-27 17:12           ` Ивайло Димитров
2016-04-27 19:05             ` Pavel Machek
2016-04-29  0:05             ` Sebastian Reichel
2016-04-29 17:45               ` Sebastian Reichel
2016-04-29 18:44                 ` Ivaylo Dimitrov
2016-05-01 10:37                   ` Sakari Ailus
2016-05-01  9:03                 ` Pavel Machek
2016-04-27 20:30           ` Pavel Machek
2016-06-17 16:42     ` Nokia N900 cameras -- pipeline setup in python (was Re: [RFC PATCH 00/24] Make Nokia N900 cameras working) Pavel Machek
2016-06-17 17:12       ` Pavel Machek
2016-06-20 17:00         ` Pavel Machek
2016-06-20 20:59         ` Sakari Ailus
2016-06-21 18:05           ` Pavel Machek
2016-06-22  7:22             ` Sakari Ailus
2016-06-22 11:18           ` Pavel Machek
2016-07-01  7:31           ` square-only image on Nokia N900 camera " Pavel Machek
2016-07-01  8:50             ` Pavel Machek
2016-07-01 11:01               ` Pavel Machek
2016-07-01 19:40                 ` Pavel Machek
2016-06-24 16:21   ` [RFC PATCH 00/24] Make Nokia N900 cameras working Pavel Machek
2016-08-27 13:48   ` fcam-dev support for new kernels -- " Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=572048AC.7050700@gmail.com \
    --to=ivo.g.dimitrov.75@gmail.com \
    --cc=linux-media@vger.kernel.org \
    --cc=pali.rohar@gmail.com \
    --cc=pavel@ucw.cz \
    --cc=sakari.ailus@iki.fi \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).