* em28xx new device
@ 2011-05-24 1:06 Moacyr Prado
0 siblings, 0 replies; only message in thread
From: Moacyr Prado @ 2011-05-24 1:06 UTC (permalink / raw)
To: linux-media
Hi, I have a board with empia chipset. The em28xx driver not load,
because the device ID is not listed on source(cards.c, i guess).
Following bellow
have some infos from board:
lsusb:
Bus 001 Device 004: ID 1b80:e755 Afatech
Opening the device, shows this ic:
empia em2888 d351c-195 727-00ag (em28xx)
nxp saa7136e/1/g SI5296.1 22 ZSD08411
NXP TDA 18271??C2 HDC2? (tda18271)
F JAPAN mb86a20s 0937 M01 E1 (mb86a20s)
but... dmesg shows:
[18373.454136] usb 6-1: USB disconnect, address 2
[18376.744074] usb 2-1: new high speed USB device using ehci_hcd and address 9
[18376.860283] usb 2-1: New USB device found, idVendor=1b80, idProduct=e755
[18376.860293] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[18376.860300] usb 2-1: Product: USB 2885 Device
[18376.860306] usb 2-1: SerialNumber: 1
The em28xx module can handle this device?
Thanks,
Moa
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-05-24 1:06 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-24 1:06 em28xx new device Moacyr Prado
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox