* Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
@ 2008-05-08 10:02 sonofzev
0 siblings, 0 replies; 14+ messages in thread
From: sonofzev @ 2008-05-08 10:02 UTC (permalink / raw)
To: linux-dvb, stev391
[-- Attachment #1: Type: text/html, Size: 1308 bytes --]
[-- Attachment #2: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
@ 2008-05-10 8:14 stev391
2008-05-13 7:21 ` allan k
2008-05-13 8:19 ` allan k
0 siblings, 2 replies; 14+ messages in thread
From: stev391 @ 2008-05-10 8:14 UTC (permalink / raw)
To: sonofzev, linux-dvb
[-- Attachment #1.1: Type: text/plain, Size: 1667 bytes --]
Allan,
It was tested with in two different machines against the cx23885 version
of the card. However the next day I built another machine with this card
and I ran into errors in my dmesg stating that the firmware version
doesn't match. I haven't had enough time to find out why this has
happened, but I think the tuner is not being reset properly.
What are your results of running this patch?
Regards,
Stephen
----- Original Message -----
From: "sonofzev@iinet.net.au"
To: linux-dvb@linuxtv.org, stev391@email.com
Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When
will it be
Date: Thu, 08 May 2008 18:02:00 +0800
Hi Stephen,
Has this been tested with the newer cx23885 version of the card or
only the older cx88 version.
I have had no success with my cx23885 version.
cheers
Allan
On Tue May 6 11:39 , stev391@email.com sent:
G'day,
I was just wondering when Chris Pascoe's code for the DViCO
Fusion HDTV Dual Express will be merged into the v4l-dvb tree, as
there have been some minor updates that increase the stability of
the card that are not in his tree.
Attached is a patch for merging the relevant sections back into
the v4l-dvb tree (and including updating Kconfig). This has been
successfully tested on two different PCs with this card (working
with gxine and mythtv, in Melbourne, Australia).
Regards,
Stephen.
-- See Exclusive Video: 10th Annual Young Hollywood Awards
--
See Exclusive Video: 10th Annual Young Hollywood Awards
http://www.hollywoodlife.net/younghollywoodawards2008/
[-- Attachment #1.2: Type: text/html, Size: 2369 bytes --]
[-- Attachment #2: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
2008-05-10 8:14 stev391
@ 2008-05-13 7:21 ` allan k
2008-05-13 8:19 ` allan k
1 sibling, 0 replies; 14+ messages in thread
From: allan k @ 2008-05-13 7:21 UTC (permalink / raw)
To: stev391; +Cc: linux-dvb
Hi Steve
I'll try it in the next couple of days.
cheers
Allan
On Sat, 2008-05-10 at 18:14 +1000, stev391@email.com wrote:
> Allan,
>
> It was tested with in two different machines against the cx23885
> version of the card. However the next day I built another machine
> with this card and I ran into errors in my dmesg stating that the
> firmware version doesn't match. I haven't had enough time to find out
> why this has happened, but I think the tuner is not being reset
> properly.
>
> What are your results of running this patch?
>
> Regards,
>
> Stephen
>
> ----- Original Message -----
> From: "sonofzev@iinet.net.au"
> To: linux-dvb@linuxtv.org, stev391@email.com
> Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express
> - When will it be
> Date: Thu, 08 May 2008 18:02:00 +0800
>
>
> Hi Stephen,
>
> Has this been tested with the newer cx23885 version of the
> card or only the older cx88 version.
> I have had no success with my cx23885 version.
>
> cheers
>
> Allan
>
>
> On Tue May 6 11:39 , stev391@email.com sent:
>
> G'day,
>
> I was just wondering when Chris Pascoe's code for the
> DViCO Fusion HDTV Dual Express will be merged into the
> v4l-dvb tree, as there have been some minor updates
> that increase the stability of the card that are not
> in his tree.
>
> Attached is a patch for merging the relevant sections
> back into the v4l-dvb tree (and including updating
> Kconfig). This has been successfully tested on two
> different PCs with this card (working with gxine and
> mythtv, in Melbourne, Australia).
>
> Regards,
> Stephen.
>
>
> --
> See Exclusive Video: 10th Annual Young Hollywood
> Awards
>
>
>
> --
> See Exclusive Video: 10th Annual Young Hollywood Awards
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
2008-05-10 8:14 stev391
2008-05-13 7:21 ` allan k
@ 2008-05-13 8:19 ` allan k
2008-05-13 11:22 ` allan k
1 sibling, 1 reply; 14+ messages in thread
From: allan k @ 2008-05-13 8:19 UTC (permalink / raw)
To: stev391; +Cc: linux-dvb
Hi Steve
I had the wrong card number selected. I have changed to card=5 and the
tuner is now working correctly.
I haven't restarted the machine, but will do so later and confirm
whether I am getting the same problem as you saw on one of your boxes.
cheers
Allan
On Sat, 2008-05-10 at 18:14 +1000, stev391@email.com wrote:
> Allan,
>
> It was tested with in two different machines against the cx23885
> version of the card. However the next day I built another machine
> with this card and I ran into errors in my dmesg stating that the
> firmware version doesn't match. I haven't had enough time to find out
> why this has happened, but I think the tuner is not being reset
> properly.
>
> What are your results of running this patch?
>
> Regards,
>
> Stephen
>
> ----- Original Message -----
> From: "sonofzev@iinet.net.au"
> To: linux-dvb@linuxtv.org, stev391@email.com
> Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express
> - When will it be
> Date: Thu, 08 May 2008 18:02:00 +0800
>
>
> Hi Stephen,
>
> Has this been tested with the newer cx23885 version of the
> card or only the older cx88 version.
> I have had no success with my cx23885 version.
>
> cheers
>
> Allan
>
>
> On Tue May 6 11:39 , stev391@email.com sent:
>
> G'day,
>
> I was just wondering when Chris Pascoe's code for the
> DViCO Fusion HDTV Dual Express will be merged into the
> v4l-dvb tree, as there have been some minor updates
> that increase the stability of the card that are not
> in his tree.
>
> Attached is a patch for merging the relevant sections
> back into the v4l-dvb tree (and including updating
> Kconfig). This has been successfully tested on two
> different PCs with this card (working with gxine and
> mythtv, in Melbourne, Australia).
>
> Regards,
> Stephen.
>
>
> --
> See Exclusive Video: 10th Annual Young Hollywood
> Awards
>
>
>
> --
> See Exclusive Video: 10th Annual Young Hollywood Awards
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
@ 2008-05-13 8:57 stev391
2008-05-13 23:30 ` allan k
2008-05-13 23:37 ` allan k
0 siblings, 2 replies; 14+ messages in thread
From: stev391 @ 2008-05-13 8:57 UTC (permalink / raw)
To: allan k; +Cc: linux-dvb
[-- Attachment #1.1: Type: text/plain, Size: 2801 bytes --]
Allan,
If you have used the v4l-dvb hg drivers and my patch the card should auto
detect, however if you want to force it, the number should be 10.
If you are using Chris Pascoe's xc-test branch then 5 is the correct card
number, but again it should auto detect.
Please advise which driver source you have been using.
Regards Stephen.
----- Original Message -----
From: "allan k"
To: stev391@email.com
Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When
will it be
Date: Tue, 13 May 2008 18:19:27 +1000
Hi Steve
I had the wrong card number selected. I have changed to card=5 and
the
tuner is now working correctly.
I haven't restarted the machine, but will do so later and confirm
whether I am getting the same problem as you saw on one of your
boxes.
cheers
Allan
On Sat, 2008-05-10 at 18:14 +1000, stev391@email.com wrote:
> Allan,
>
> It was tested with in two different machines against the cx23885
> version of the card. However the next day I built another machine
> with this card and I ran into errors in my dmesg stating that the
> firmware version doesn't match. I haven't had enough time to find
out
> why this has happened, but I think the tuner is not being reset
> properly. What are your results of running this patch?
>
> Regards,
>
> Stephen
>
> ----- Original Message -----
> From: "sonofzev@iinet.net.au" To:
> linux-dvb@linuxtv.org, stev391@email.com
> Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express
> - When will it be
> Date: Thu, 08 May 2008 18:02:00 +0800
>
>
> Hi Stephen, Has this been tested with the
> newer cx23885 version of the
> card or only the older cx88 version. I have had
> no success with my cx23885 version. cheers
>
> Allan
>
>
> On Tue May 6 11:39 , stev391@email.com sent:
>
> G'day,
>
> I was just wondering when Chris Pascoe's code for the
> DViCO Fusion HDTV Dual Express will be merged into the
> v4l-dvb tree, as there have been some minor updates
> that increase the stability of the card that are not
> in his tree.
>
> Attached is a patch for merging the relevant sections
> back into the v4l-dvb tree (and including updating
> Kconfig). This has been successfully tested on two
> different PCs with this card (working with gxine and
> mythtv, in Melbourne, Australia).
>
> Regards,
> Stephen.
>
>
> -- See Exclusive Video: 10th
> Annual Young Hollywood
> Awards
>
>
>
> -- See Exclusive Video: 10th Annual Young Hollywood Awards
>
--
See Exclusive Video: 10th Annual Young Hollywood Awards
http://www.hollywoodlife.net/younghollywoodawards2008/
[-- Attachment #1.2: Type: text/html, Size: 3795 bytes --]
[-- Attachment #2: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
2008-05-13 8:19 ` allan k
@ 2008-05-13 11:22 ` allan k
0 siblings, 0 replies; 14+ messages in thread
From: allan k @ 2008-05-13 11:22 UTC (permalink / raw)
To: stev391; +Cc: linux-dvb
Hi Steve
After reboot, I initially had some audio problems, but found this was
from overdoing my configuration files for modules.conf in Gentoo.
After removing a couple of duplicates and then restarting my hardware
decoder, everything works fine.
I now have 3 working tuners from 2 cards.
cheers
Allan
On Tue, 2008-05-13 at 18:19 +1000, allan k wrote:
> Hi Steve
> I had the wrong card number selected. I have changed to card=5 and the
> tuner is now working correctly.
>
> I haven't restarted the machine, but will do so later and confirm
> whether I am getting the same problem as you saw on one of your boxes.
>
> cheers
>
> Allan
>
>
>
>
>
>
>
>
> On Sat, 2008-05-10 at 18:14 +1000, stev391@email.com wrote:
> > Allan,
> >
> > It was tested with in two different machines against the cx23885
> > version of the card. However the next day I built another machine
> > with this card and I ran into errors in my dmesg stating that the
> > firmware version doesn't match. I haven't had enough time to find out
> > why this has happened, but I think the tuner is not being reset
> > properly.
> >
> > What are your results of running this patch?
> >
> > Regards,
> >
> > Stephen
> >
> > ----- Original Message -----
> > From: "sonofzev@iinet.net.au"
> > To: linux-dvb@linuxtv.org, stev391@email.com
> > Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express
> > - When will it be
> > Date: Thu, 08 May 2008 18:02:00 +0800
> >
> >
> > Hi Stephen,
> >
> > Has this been tested with the newer cx23885 version of the
> > card or only the older cx88 version.
> > I have had no success with my cx23885 version.
> >
> > cheers
> >
> > Allan
> >
> >
> > On Tue May 6 11:39 , stev391@email.com sent:
> >
> > G'day,
> >
> > I was just wondering when Chris Pascoe's code for the
> > DViCO Fusion HDTV Dual Express will be merged into the
> > v4l-dvb tree, as there have been some minor updates
> > that increase the stability of the card that are not
> > in his tree.
> >
> > Attached is a patch for merging the relevant sections
> > back into the v4l-dvb tree (and including updating
> > Kconfig). This has been successfully tested on two
> > different PCs with this card (working with gxine and
> > mythtv, in Melbourne, Australia).
> >
> > Regards,
> > Stephen.
> >
> >
> > --
> > See Exclusive Video: 10th Annual Young Hollywood
> > Awards
> >
> >
> >
> > --
> > See Exclusive Video: 10th Annual Young Hollywood Awards
> >
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
2008-05-13 8:57 stev391
@ 2008-05-13 23:30 ` allan k
2008-05-20 11:21 ` jochen s
2008-05-13 23:37 ` allan k
1 sibling, 1 reply; 14+ messages in thread
From: allan k @ 2008-05-13 23:30 UTC (permalink / raw)
To: stev391; +Cc: linux-dvb
Hi Steve
I've been using Chris Pascoe's sources. I turned off the forced card
number and the auto-detection seems to be working.
I don't know if it's weather related or if it's to do with additional
interference from the card, but since I got it working, channel 9 (which
is usually very good) and ABC reception (which seems to come in and out)
has gone to unwatchable. Any thoughts on this? (should I run separate
cables from my antenna amplifier to each card, or is using the out port
on the Fusion Lite to the Express okay?)
I'm studying for an exam next week, but if you'd like me to test your
sources I can try that after next week.
cheers
Allan
On Tue, 2008-05-13 at 18:57 +1000, stev391@email.com wrote:
> Allan,
>
> If you have used the v4l-dvb hg drivers and my patch the card should
> auto detect, however if you want to force it, the number should be 10.
>
> If you are using Chris Pascoe's xc-test branch then 5 is the correct
> card number, but again it should auto detect.
>
> Please advise which driver source you have been using.
>
> Regards Stephen.
>
> ----- Original Message -----
> From: "allan k"
> To: stev391@email.com
> Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express
> - When will it be
> Date: Tue, 13 May 2008 18:19:27 +1000
>
>
> Hi Steve
> I had the wrong card number selected. I have changed to card=5
> and the
> tuner is now working correctly.
>
> I haven't restarted the machine, but will do so later and
> confirm
> whether I am getting the same problem as you saw on one of
> your boxes.
>
> cheers
>
> Allan
>
>
>
>
>
>
>
>
> On Sat, 2008-05-10 at 18:14 +1000, stev391@email.com wrote:
> > Allan,
> >
> > It was tested with in two different machines against the
> cx23885
> > version of the card. However the next day I built another
> machine
> > with this card and I ran into errors in my dmesg stating
> that the
> > firmware version doesn't match. I haven't had enough time to
> find out
> > why this has happened, but I think the tuner is not being
> reset
> > properly. What are your results of running this patch?
> >
> > Regards,
> >
> > Stephen
> >
> > ----- Original Message -----
> > From: "sonofzev@iinet.net.au" To:
> > linux-dvb@linuxtv.org, stev391@email.com
> > Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual
> Express
> > - When will it be
> > Date: Thu, 08 May 2008 18:02:00 +0800
> >
> >
> > Hi Stephen, Has this been tested with the
> > newer cx23885 version of the
> > card or only the older cx88 version. I have had
> > no success with my cx23885 version. cheers
> >
> > Allan
> >
> >
> > On Tue May 6 11:39 , stev391@email.com sent:
> >
> > G'day,
> >
> > I was just wondering when Chris Pascoe's code for the
> > DViCO Fusion HDTV Dual Express will be merged into the
> > v4l-dvb tree, as there have been some minor updates
> > that increase the stability of the card that are not
> > in his tree.
> >
> > Attached is a patch for merging the relevant sections
> > back into the v4l-dvb tree (and including updating
> > Kconfig). This has been successfully tested on two
> > different PCs with this card (working with gxine and
> > mythtv, in Melbourne, Australia).
> >
> > Regards,
> > Stephen.
> >
> >
> > -- See Exclusive Video: 10th
> > Annual Young Hollywood
> > Awards
> >
> >
> >
> > -- See Exclusive Video: 10th Annual Young Hollywood Awards
> >
>
> --
> See Exclusive Video: 10th Annual Young Hollywood Awards
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
2008-05-13 8:57 stev391
2008-05-13 23:30 ` allan k
@ 2008-05-13 23:37 ` allan k
1 sibling, 0 replies; 14+ messages in thread
From: allan k @ 2008-05-13 23:37 UTC (permalink / raw)
To: stev391; +Cc: linux-dvb
Also, just wondering if anyone was planning to look at building lirc
based remote support for the packaged remote (not ir-tty as I don't want
to remap the shortcut keys)
On Tue, 2008-05-13 at 18:57 +1000, stev391@email.com wrote:
> Allan,
>
> If you have used the v4l-dvb hg drivers and my patch the card should
> auto detect, however if you want to force it, the number should be 10.
>
> If you are using Chris Pascoe's xc-test branch then 5 is the correct
> card number, but again it should auto detect.
>
> Please advise which driver source you have been using.
>
> Regards Stephen.
>
> ----- Original Message -----
> From: "allan k"
> To: stev391@email.com
> Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express
> - When will it be
> Date: Tue, 13 May 2008 18:19:27 +1000
>
>
> Hi Steve
> I had the wrong card number selected. I have changed to card=5
> and the
> tuner is now working correctly.
>
> I haven't restarted the machine, but will do so later and
> confirm
> whether I am getting the same problem as you saw on one of
> your boxes.
>
> cheers
>
> Allan
>
>
>
>
>
>
>
>
> On Sat, 2008-05-10 at 18:14 +1000, stev391@email.com wrote:
> > Allan,
> >
> > It was tested with in two different machines against the
> cx23885
> > version of the card. However the next day I built another
> machine
> > with this card and I ran into errors in my dmesg stating
> that the
> > firmware version doesn't match. I haven't had enough time to
> find out
> > why this has happened, but I think the tuner is not being
> reset
> > properly. What are your results of running this patch?
> >
> > Regards,
> >
> > Stephen
> >
> > ----- Original Message -----
> > From: "sonofzev@iinet.net.au" To:
> > linux-dvb@linuxtv.org, stev391@email.com
> > Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual
> Express
> > - When will it be
> > Date: Thu, 08 May 2008 18:02:00 +0800
> >
> >
> > Hi Stephen, Has this been tested with the
> > newer cx23885 version of the
> > card or only the older cx88 version. I have had
> > no success with my cx23885 version. cheers
> >
> > Allan
> >
> >
> > On Tue May 6 11:39 , stev391@email.com sent:
> >
> > G'day,
> >
> > I was just wondering when Chris Pascoe's code for the
> > DViCO Fusion HDTV Dual Express will be merged into the
> > v4l-dvb tree, as there have been some minor updates
> > that increase the stability of the card that are not
> > in his tree.
> >
> > Attached is a patch for merging the relevant sections
> > back into the v4l-dvb tree (and including updating
> > Kconfig). This has been successfully tested on two
> > different PCs with this card (working with gxine and
> > mythtv, in Melbourne, Australia).
> >
> > Regards,
> > Stephen.
> >
> >
> > -- See Exclusive Video: 10th
> > Annual Young Hollywood
> > Awards
> >
> >
> >
> > -- See Exclusive Video: 10th Annual Young Hollywood Awards
> >
>
> --
> See Exclusive Video: 10th Annual Young Hollywood Awards
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
@ 2008-05-13 23:52 stev391
2008-05-14 0:14 ` allan k
0 siblings, 1 reply; 14+ messages in thread
From: stev391 @ 2008-05-13 23:52 UTC (permalink / raw)
To: allan k; +Cc: linux-dvb
[-- Attachment #1.1: Type: text/plain, Size: 5134 bytes --]
Allan,
I have had similar issues to what you have described, with usually good
reception channels having degraded quality.
One solution that I have used is to place an attenuator in line to reduce
the signal. This card has a good sensitivity for low reception levels
however the dynamic range of the card is not good enough to handle what
the older more common TV cards require for reception levels.
I have had no issue with Chris Pascoe's drivers, the only problem is that
his branch is now get dated and some of my other dvb gear does not work
reliably under his branch. This is why I'm trying to generate a patch
that works against the v4l-dvb tree.
Also can you tell me what programs you are using to watch TV with? With
gxine I have no problem with my patch however when I run mythtv
occassionally it crashes my tuner. I have yet to accurately determine why
this is happening, and what I need to do to ensure that a userspace
program doesn't crash my hardware.
Regards,
Stephen.
----- Original Message -----
From: "allan k"
To: stev391@email.com
Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When
will it be
Date: Wed, 14 May 2008 09:30:29 +1000
Hi Steve
I've been using Chris Pascoe's sources. I turned off the forced card
number and the auto-detection seems to be working.
I don't know if it's weather related or if it's to do with additional
interference from the card, but since I got it working, channel 9
(which
is usually very good) and ABC reception (which seems to come in and
out)
has gone to unwatchable. Any thoughts on this? (should I run separate
cables from my antenna amplifier to each card, or is using the out
port
on the Fusion Lite to the Express okay?)
I'm studying for an exam next week, but if you'd like me to test your
sources I can try that after next week.
cheers
Allan
On Tue, 2008-05-13 at 18:57 +1000, stev391@email.com wrote:
> Allan,
>
> If you have used the v4l-dvb hg drivers and my patch the card
should
> auto detect, however if you want to force it, the number should be
10.
>
> If you are using Chris Pascoe's xc-test branch then 5 is the
correct
> card number, but again it should auto detect.
>
> Please advise which driver source you have been using.
>
> Regards Stephen.
>
> ----- Original Message -----
> From: "allan k" To: stev391@email.com
> Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express
> - When will it be
> Date: Tue, 13 May 2008 18:19:27 +1000
>
>
> Hi Steve
> I had the wrong card number selected. I have changed to card=5
> and the
> tuner is now working correctly.
>
> I haven't restarted the machine, but will do so later and
> confirm
> whether I am getting the same problem as you saw on one of
> your boxes.
>
> cheers
>
> Allan
>
>
>
>
>
>
>
>
> On Sat, 2008-05-10 at 18:14 +1000, stev391@email.com wrote:
> > Allan,
> >
> > It was tested with in two different machines against the
> cx23885
> > version of the card. However the next day I built another
> machine
> > with this card and I ran into errors in my dmesg stating
> that the
> > firmware version doesn't match. I haven't had enough time to
> find out
> > why this has happened, but I think the tuner is not being
> reset
> > properly. What are your results of running this patch?
> >
> > Regards,
> >
> > Stephen
> >
> > ----- Original Message -----
> > From: "sonofzev@iinet.net.au" To: >
> linux-dvb@linuxtv.org, stev391@email.com
> > Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual
> Express
> > - When will it be
> > Date: Thu, 08 May 2008 18:02:00 +0800
> >
> >
> > Hi Stephen, Has this been tested with the >
> newer cx23885 version of the
> > card or only the older cx88 version. I have had
> > no success with my cx23885 version. cheers
> >
> > Allan
> >
> >
> > On Tue May 6 11:39 , stev391@email.com sent:
> >
> > G'day,
> >
> > I was just wondering when Chris Pascoe's code for the
> > DViCO Fusion HDTV Dual Express will be merged into the
> > v4l-dvb tree, as there have been some minor updates
> > that increase the stability of the card that are not
> > in his tree.
> >
> > Attached is a patch for merging the relevant sections
> > back into the v4l-dvb tree (and including updating
> > Kconfig). This has been successfully tested on two
> > different PCs with this card (working with gxine and
> > mythtv, in Melbourne, Australia).
> >
> > Regards,
> > Stephen.
> >
> >
> > -- See Exclusive Video: 10th > Annual Young Hollywood
> > Awards
> >
> >
> >
> > -- See Exclusive Video: 10th Annual Young Hollywood Awards
> >
>
> -- See Exclusive Video: 10th Annual Young Hollywood Awards
>
--
See Exclusive Video: 10th Annual Young Hollywood Awards
http://www.hollywoodlife.net/younghollywoodawards2008/
[-- Attachment #1.2: Type: text/html, Size: 6801 bytes --]
[-- Attachment #2: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
@ 2008-05-13 23:55 stev391
2008-05-14 0:11 ` allan k
0 siblings, 1 reply; 14+ messages in thread
From: stev391 @ 2008-05-13 23:55 UTC (permalink / raw)
To: allan k; +Cc: linux-dvb
[-- Attachment #1.1: Type: text/plain, Size: 3876 bytes --]
Allan,
lirc support for the remote is not one of priorities as I'm using an iMon
VFD display that includes a remote control that has patches available
against the lirc CVS.
However I can glance at it if I have time and see if I can implement an
appropriate solution.
Stephen
----- Original Message -----
From: "allan k"
To: stev391@email.com
Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When
will it be
Date: Wed, 14 May 2008 09:37:44 +1000
Also, just wondering if anyone was planning to look at building lirc
based remote support for the packaged remote (not ir-tty as I don't
want
to remap the shortcut keys)
On Tue, 2008-05-13 at 18:57 +1000, stev391@email.com wrote:
> Allan,
>
> If you have used the v4l-dvb hg drivers and my patch the card
should
> auto detect, however if you want to force it, the number should be
10.
>
> If you are using Chris Pascoe's xc-test branch then 5 is the
correct
> card number, but again it should auto detect.
>
> Please advise which driver source you have been using.
>
> Regards Stephen.
>
> ----- Original Message -----
> From: "allan k" To: stev391@email.com
> Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express
> - When will it be
> Date: Tue, 13 May 2008 18:19:27 +1000
>
>
> Hi Steve
> I had the wrong card number selected. I have changed to card=5
> and the
> tuner is now working correctly.
>
> I haven't restarted the machine, but will do so later and
> confirm
> whether I am getting the same problem as you saw on one of
> your boxes.
>
> cheers
>
> Allan
>
>
>
>
>
>
>
>
> On Sat, 2008-05-10 at 18:14 +1000, stev391@email.com wrote:
> > Allan,
> >
> > It was tested with in two different machines against the
> cx23885
> > version of the card. However the next day I built another
> machine
> > with this card and I ran into errors in my dmesg stating
> that the
> > firmware version doesn't match. I haven't had enough time to
> find out
> > why this has happened, but I think the tuner is not being
> reset
> > properly. What are your results of running this patch?
> >
> > Regards,
> >
> > Stephen
> >
> > ----- Original Message -----
> > From: "sonofzev@iinet.net.au" To: >
> linux-dvb@linuxtv.org, stev391@email.com
> > Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual
> Express
> > - When will it be
> > Date: Thu, 08 May 2008 18:02:00 +0800
> >
> >
> > Hi Stephen, Has this been tested with the >
> newer cx23885 version of the
> > card or only the older cx88 version. I have had
> > no success with my cx23885 version. cheers
> >
> > Allan
> >
> >
> > On Tue May 6 11:39 , stev391@email.com sent:
> >
> > G'day,
> >
> > I was just wondering when Chris Pascoe's code for the
> > DViCO Fusion HDTV Dual Express will be merged into the
> > v4l-dvb tree, as there have been some minor updates
> > that increase the stability of the card that are not
> > in his tree.
> >
> > Attached is a patch for merging the relevant sections
> > back into the v4l-dvb tree (and including updating
> > Kconfig). This has been successfully tested on two
> > different PCs with this card (working with gxine and
> > mythtv, in Melbourne, Australia).
> >
> > Regards,
> > Stephen.
> >
> >
> > -- See Exclusive Video: 10th > Annual Young Hollywood
> > Awards
> >
> >
> >
> > -- See Exclusive Video: 10th Annual Young Hollywood Awards
> >
>
> -- See Exclusive Video: 10th Annual Young Hollywood Awards
>
--
See Exclusive Video: 10th Annual Young Hollywood Awards
http://www.hollywoodlife.net/younghollywoodawards2008/
[-- Attachment #1.2: Type: text/html, Size: 5484 bytes --]
[-- Attachment #2: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
2008-05-13 23:55 stev391
@ 2008-05-14 0:11 ` allan k
0 siblings, 0 replies; 14+ messages in thread
From: allan k @ 2008-05-14 0:11 UTC (permalink / raw)
To: stev391; +Cc: linux-dvb
Don't worry about it.
I have a remote (Fusion MCE, that I bought for a pack of smokes as my
Fusion USB remote is on my frontend only box in the bedroom).
It is more of a nice to have, as the express remote is better laid out,
and better looking than the Fusion MCE).
cheers
Allan
On Wed, 2008-05-14 at 09:55 +1000, stev391@email.com wrote:
> Allan,
>
> lirc support for the remote is not one of priorities as I'm using an
> iMon VFD display that includes a remote control that has patches
> available against the lirc CVS.
>
> However I can glance at it if I have time and see if I can implement
> an appropriate solution.
>
> Stephen
>
> ----- Original Message -----
> From: "allan k"
> To: stev391@email.com
> Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express
> - When will it be
> Date: Wed, 14 May 2008 09:37:44 +1000
>
>
> Also, just wondering if anyone was planning to look at
> building lirc
> based remote support for the packaged remote (not ir-tty as I
> don't want
> to remap the shortcut keys)
> On Tue, 2008-05-13 at 18:57 +1000, stev391@email.com wrote:
> > Allan,
> >
> > If you have used the v4l-dvb hg drivers and my patch the
> card should
> > auto detect, however if you want to force it, the number
> should be 10.
> >
> > If you are using Chris Pascoe's xc-test branch then 5 is the
> correct
> > card number, but again it should auto detect.
> >
> > Please advise which driver source you have been using.
> >
> > Regards Stephen.
> >
> > ----- Original Message -----
> > From: "allan k" To: stev391@email.com
> > Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual
> Express
> > - When will it be
> > Date: Tue, 13 May 2008 18:19:27 +1000
> >
> >
> > Hi Steve
> > I had the wrong card number selected. I have changed to
> card=5
> > and the
> > tuner is now working correctly.
> >
> > I haven't restarted the machine, but will do so later and
> > confirm
> > whether I am getting the same problem as you saw on one of
> > your boxes.
> >
> > cheers
> >
> > Allan
> >
> >
> >
> >
> >
> >
> >
> >
> > On Sat, 2008-05-10 at 18:14 +1000, stev391@email.com wrote:
> > > Allan,
> > >
> > > It was tested with in two different machines against the
> > cx23885
> > > version of the card. However the next day I built another
> > machine
> > > with this card and I ran into errors in my dmesg stating
> > that the
> > > firmware version doesn't match. I haven't had enough time
> to
> > find out
> > > why this has happened, but I think the tuner is not being
> > reset
> > > properly. What are your results of running this patch?
> > >
> > > Regards,
> > >
> > > Stephen
> > >
> > > ----- Original Message -----
> > > From: "sonofzev@iinet.net.au" To: >
> > linux-dvb@linuxtv.org, stev391@email.com
> > > Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual
> > Express
> > > - When will it be
> > > Date: Thu, 08 May 2008 18:02:00 +0800
> > >
> > >
> > > Hi Stephen, Has this been tested with the >
> > newer cx23885 version of the
> > > card or only the older cx88 version. I have had
> > > no success with my cx23885 version. cheers
> > >
> > > Allan
> > >
> > >
> > > On Tue May 6 11:39 , stev391@email.com sent:
> > >
> > > G'day,
> > >
> > > I was just wondering when Chris Pascoe's code for the
> > > DViCO Fusion HDTV Dual Express will be merged into the
> > > v4l-dvb tree, as there have been some minor updates
> > > that increase the stability of the card that are not
> > > in his tree.
> > >
> > > Attached is a patch for merging the relevant sections
> > > back into the v4l-dvb tree (and including updating
> > > Kconfig). This has been successfully tested on two
> > > different PCs with this card (working with gxine and
> > > mythtv, in Melbourne, Australia).
> > >
> > > Regards,
> > > Stephen.
> > >
> > >
> > > -- See Exclusive Video: 10th > Annual Young Hollywood
> > > Awards
> > >
> > >
> > >
> > > -- See Exclusive Video: 10th Annual Young Hollywood Awards
> > >
> >
> > -- See Exclusive Video: 10th Annual Young Hollywood Awards
> >
>
> --
> See Exclusive Video: 10th Annual Young Hollywood Awards
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
2008-05-13 23:52 stev391
@ 2008-05-14 0:14 ` allan k
0 siblings, 0 replies; 14+ messages in thread
From: allan k @ 2008-05-14 0:14 UTC (permalink / raw)
To: stev391; +Cc: linux-dvb
Cool.
I'll try your sources out later and provide feedback. (I have the same
issue as I run a Fusion Lite on the system as well).
With regards to attenuation, there is a "pass through" port on my
Kingray antenna amplifier. From your feedback it looks like that if I
use the pass through port, I may get a better picture.
cheers
Allan
On Wed, 2008-05-14 at 09:52 +1000, stev391@email.com wrote:
> Allan,
>
> I have had similar issues to what you have described, with usually
> good reception channels having degraded quality.
>
> One solution that I have used is to place an attenuator in line to
> reduce the signal. This card has a good sensitivity for low reception
> levels however the dynamic range of the card is not good enough to
> handle what the older more common TV cards require for reception
> levels.
>
> I have had no issue with Chris Pascoe's drivers, the only problem is
> that his branch is now get dated and some of my other dvb gear does
> not work reliably under his branch. This is why I'm trying to
> generate a patch that works against the v4l-dvb tree.
>
> Also can you tell me what programs you are using to watch TV with?
> With gxine I have no problem with my patch however when I run mythtv
> occassionally it crashes my tuner. I have yet to accurately determine
> why this is happening, and what I need to do to ensure that a
> userspace program doesn't crash my hardware.
>
> Regards,
> Stephen.
>
>
> ----- Original Message -----
> From: "allan k"
> To: stev391@email.com
> Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express
> - When will it be
> Date: Wed, 14 May 2008 09:30:29 +1000
>
>
> Hi Steve
>
> I've been using Chris Pascoe's sources. I turned off the
> forced card
> number and the auto-detection seems to be working.
>
> I don't know if it's weather related or if it's to do with
> additional
> interference from the card, but since I got it working,
> channel 9 (which
> is usually very good) and ABC reception (which seems to come
> in and out)
> has gone to unwatchable. Any thoughts on this? (should I run
> separate
> cables from my antenna amplifier to each card, or is using the
> out port
> on the Fusion Lite to the Express okay?)
>
> I'm studying for an exam next week, but if you'd like me to
> test your
> sources I can try that after next week.
>
> cheers
>
> Allan
>
> On Tue, 2008-05-13 at 18:57 +1000, stev391@email.com wrote:
> > Allan,
> >
> > If you have used the v4l-dvb hg drivers and my patch the
> card should
> > auto detect, however if you want to force it, the number
> should be 10.
> >
> > If you are using Chris Pascoe's xc-test branch then 5 is the
> correct
> > card number, but again it should auto detect.
> >
> > Please advise which driver source you have been using.
> >
> > Regards Stephen.
> >
> > ----- Original Message -----
> > From: "allan k" To: stev391@email.com
> > Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual
> Express
> > - When will it be
> > Date: Tue, 13 May 2008 18:19:27 +1000
> >
> >
> > Hi Steve
> > I had the wrong card number selected. I have changed to
> card=5
> > and the
> > tuner is now working correctly.
> >
> > I haven't restarted the machine, but will do so later and
> > confirm
> > whether I am getting the same problem as you saw on one of
> > your boxes.
> >
> > cheers
> >
> > Allan
> >
> >
> >
> >
> >
> >
> >
> >
> > On Sat, 2008-05-10 at 18:14 +1000, stev391@email.com wrote:
> > > Allan,
> > >
> > > It was tested with in two different machines against the
> > cx23885
> > > version of the card. However the next day I built another
> > machine
> > > with this card and I ran into errors in my dmesg stating
> > that the
> > > firmware version doesn't match. I haven't had enough time
> to
> > find out
> > > why this has happened, but I think the tuner is not being
> > reset
> > > properly. What are your results of running this patch?
> > >
> > > Regards,
> > >
> > > Stephen
> > >
> > > ----- Original Message -----
> > > From: "sonofzev@iinet.net.au" To: >
> > linux-dvb@linuxtv.org, stev391@email.com
> > > Subject: Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual
> > Express
> > > - When will it be
> > > Date: Thu, 08 May 2008 18:02:00 +0800
> > >
> > >
> > > Hi Stephen, Has this been tested with the >
> > newer cx23885 version of the
> > > card or only the older cx88 version. I have had
> > > no success with my cx23885 version. cheers
> > >
> > > Allan
> > >
> > >
> > > On Tue May 6 11:39 , stev391@email.com sent:
> > >
> > > G'day,
> > >
> > > I was just wondering when Chris Pascoe's code for the
> > > DViCO Fusion HDTV Dual Express will be merged into the
> > > v4l-dvb tree, as there have been some minor updates
> > > that increase the stability of the card that are not
> > > in his tree.
> > >
> > > Attached is a patch for merging the relevant sections
> > > back into the v4l-dvb tree (and including updating
> > > Kconfig). This has been successfully tested on two
> > > different PCs with this card (working with gxine and
> > > mythtv, in Melbourne, Australia).
> > >
> > > Regards,
> > > Stephen.
> > >
> > >
> > > -- See Exclusive Video: 10th > Annual Young Hollywood
> > > Awards
> > >
> > >
> > >
> > > -- See Exclusive Video: 10th Annual Young Hollywood Awards
> > >
> >
> > -- See Exclusive Video: 10th Annual Young Hollywood Awards
> >
>
> --
> See Exclusive Video: 10th Annual Young Hollywood Awards
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
@ 2008-05-14 0:30 stev391
0 siblings, 0 replies; 14+ messages in thread
From: stev391 @ 2008-05-14 0:30 UTC (permalink / raw)
To: allan k; +Cc: linux-dvb
[-- Attachment #1.1: Type: text/plain, Size: 2198 bytes --]
Allan,
The "Pass Through" port is not what you are thinking it is (Unless
kingray have changed there naming conventions, let me know what model and
I can tell you exactly). The Pass through port is usually for the DC
power (or Low frequency AC) to pass through the device and into a further
amplifier along the coax to the antenna. You can try turning down your
mast head amplifier, this will effect other tuners connected as well OR
you can goto Jaycar or Altronics and buy some attenuators.
Regards,
Stephen.
Cool.
I'll try your sources out later and provide feedback. (I have the
same
issue as I run a Fusion Lite on the system as well).
With regards to attenuation, there is a "pass through" port on my
Kingray antenna amplifier. From your feedback it looks like that if I
use the pass through port, I may get a better picture.
cheers
Allan
On Wed, 2008-05-14 at 09:52 +1000, stev391@email.com wrote:
> Allan,
>
> I have had similar issues to what you have described, with usually
> good reception channels having degraded quality. One solution
> that I have used is to place an attenuator in line to
> reduce the signal. This card has a good sensitivity for low
reception
> levels however the dynamic range of the card is not good enough to
> handle what the older more common TV cards require for reception
> levels.
>
> I have had no issue with Chris Pascoe's drivers, the only problem
is
> that his branch is now get dated and some of my other dvb gear does
> not work reliably under his branch. This is why I'm trying to
> generate a patch that works against the v4l-dvb tree.
>
> Also can you tell me what programs you are using to watch TV with?
> With gxine I have no problem with my patch however when I run
mythtv
> occassionally it crashes my tuner. I have yet to accurately
determine
> why this is happening, and what I need to do to ensure that a
> userspace program doesn't crash my hardware.
>
> Regards,
> Stephen.
--
See Exclusive Video: 10th Annual Young Hollywood Awards
http://www.hollywoodlife.net/younghollywoodawards2008/
[-- Attachment #1.2: Type: text/html, Size: 2589 bytes --]
[-- Attachment #2: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be
2008-05-13 23:30 ` allan k
@ 2008-05-20 11:21 ` jochen s
0 siblings, 0 replies; 14+ messages in thread
From: jochen s @ 2008-05-20 11:21 UTC (permalink / raw)
To: linux-dvb
I tried to use the xc-test branch with this card and loading the driver with
option card=5 looks good:
468.353850] cx23885 driver version 0.0.1 loaded
[ 468.354084] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 468.354213] CORE cx23885[0]: subsystem: 18ac:db78, board: DViCO FusionHDTV
DVB-T Dual Express [card=5,insmod option]
[ 468.402021] input: i2c IR (FusionHDTV) as /class/input/input6
[ 468.402153] ir-kbd-i2c: i2c IR (FusionHDTV) detected at i2c-2/2-006b/ir0
[cx23885[0]]
[ 468.402157] cx23885[0]: i2c bus 0 registered
[ 468.402814] cx23885[0]: i2c bus 1 registered
[ 468.402950] cx23885[0]: i2c bus 2 registered
[ 468.424684] cx23885[0]: cx23885 based dvb card
[ 468.427525] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 468.427625] DVB: registering new adapter (cx23885[0])
[ 468.427723] DVB: registering frontend 1 (Zarlink ZL10353 DVB-T)...
[ 468.428072] cx23885[0]: cx23885 based dvb card
[ 468.430856] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[ 468.430954] DVB: registering new adapter (cx23885[0])
[ 468.431051] DVB: registering frontend 2 (Zarlink ZL10353 DVB-T)...
[ 468.431383] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency:
0, mmio: 0xfd600000
[ 468.431392] PCI: Setting latency timer of device 0000:02:00.0 to 64
but when tuning to a channel via VDR it does not work - i got STR 0% SNR 0%
and immediately after changing to the card my system load goes up and I got
the following messages (continuing):
[ 590.342432] xc2028 2-0061: Loading 3 firmware images from
xc3028-dvico-au-01.fw, type: DViCO DualDig4/Nano2 (Australia), ver 2.7
[ 590.344845] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 590.838414] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 592.654769] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 593.522195] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 595.363939] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 595.927471] xc2028 2-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
then syslog is full of these messages - so I assume something went wrong -
seems like the firmware doesn't match or loading the firmware fails in a way?
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2008-05-20 11:21 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-05-08 10:02 [linux-dvb] DViCO Fusion HDTV DVB-T Dual Express - When will it be sonofzev
-- strict thread matches above, loose matches on Subject: below --
2008-05-10 8:14 stev391
2008-05-13 7:21 ` allan k
2008-05-13 8:19 ` allan k
2008-05-13 11:22 ` allan k
2008-05-13 8:57 stev391
2008-05-13 23:30 ` allan k
2008-05-20 11:21 ` jochen s
2008-05-13 23:37 ` allan k
2008-05-13 23:52 stev391
2008-05-14 0:14 ` allan k
2008-05-13 23:55 stev391
2008-05-14 0:11 ` allan k
2008-05-14 0:30 stev391
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox