[linux-dvb] Compile error when I get to snd-go7007.c

["Peter J. Olson" <peterjolson@gmail.com>]

[-- Attachment #1.1: Type: text/plain, Size: 1517 bytes --]

Hey all,

I have a Mythbuntu 8.10 system w/ a pctv 800i (pci card) and a pctv hd stick
(800e). Had both running just fine for about 8 months... then the stick
stopped working.  Or rather, it works but wont pick up a signal.

I decided I would update my system a little and figure out what broke my
800e. I updated my kernel and went to recompile v4l-dvb and got this error:

  CC [M]  /home/mythbox/Firmware/v4l-dvb/v4l/snd-go7007.o

/home/mythbox/Firmware/v4l-dvb/v4l/snd-go7007.c: In function
'go7007_snd_init':

/home/mythbox/Firmware/v4l-dvb/v4l/snd-go7007.c:251: error: implicit
declaration of function 'snd_card_create'

make[3]: *** [/home/mythbox/Firmware/v4l-dvb/v4l/snd-go7007.o] Error 1

make[2]: *** [_module_/home/mythbox/Firmware/v4l-dvb/v4l] Error 2

make[2]: Leaving directory `/usr/src/linux-headers-2.6.28-15-generic'

make[1]: *** [default] Error 2

make[1]: Leaving directory `/home/mythbox/Firmware/v4l-dvb/v4l'

make: *** [all] Error 2

I was using the old copy of v4l I had so I thought it might have been the
new kernel fighting w/ the old v4l. So I updated v4l (did a pull via hg)...
same error.

I dinked w/ it for a long time and finally gave up and upgraded to 9.0.4.
Same error, now neither of my cards will work (brutal!)  My 800i is acting
like the 800e was.  I can see the card in mythbackend setup but always gets
no signal in mythtv.

I dont even know what the snd-go7007 would go with... I dont even have that
type of hardware (i dont think).

Anyone have any ideas?

Thanks,
Peter

[-- Attachment #1.2: Type: text/html, Size: 1674 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb