Re: [PATCH v11 15/32] rcar-vin: break out format alignment and checking

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Niklas,

Thank you for the patch.

On Friday, 2 March 2018 03:57:34 EET Niklas Söderlund wrote:
> Part of the format alignment and checking can be shared with the Gen3
> format handling. Break that part out to a separate function.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
>  drivers/media/platform/rcar-vin/rcar-v4l2.c | 96 +++++++++++++++-----------
>  1 file changed, 54 insertions(+), 42 deletions(-)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> b/drivers/media/platform/rcar-vin/rcar-v4l2.c index
> b94ca9ffb1d3b323..3290e603b44cdf3a 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -87,6 +87,59 @@ static u32 rvin_format_sizeimage(struct v4l2_pix_format
> *pix) return pix->bytesperline * pix->height;
>  }
> 
> +static int rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format
> *pix)
> +{
> +	u32 walign;
> +
> +	if (!rvin_format_from_pixel(pix->pixelformat) ||
> +	    (vin->info->model == RCAR_M1 &&
> +	     pix->pixelformat == V4L2_PIX_FMT_XBGR32))
> +		pix->pixelformat = RVIN_DEFAULT_FORMAT;
> +
> +	switch (pix->field) {
> +	case V4L2_FIELD_TOP:
> +	case V4L2_FIELD_BOTTOM:
> +	case V4L2_FIELD_NONE:
> +	case V4L2_FIELD_INTERLACED_TB:
> +	case V4L2_FIELD_INTERLACED_BT:
> +	case V4L2_FIELD_INTERLACED:
> +		break;
> +	case V4L2_FIELD_ALTERNATE:
> +		/*
> +		 * Driver do not (yet) support outputting ALTERNATE to a
> +		 * userspace. It does support outputting INTERLACED so use
> +		 * the VIN hardware to combine the two fields.
> +		 */
> +		pix->field = V4L2_FIELD_INTERLACED;
> +		pix->height *= 2;
> +		break;
> +	default:
> +		pix->field = RVIN_DEFAULT_FIELD;
> +		break;
> +	}
> +
> +	/* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
> +	walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
> +
> +	/* Limit to VIN capabilities */
> +	v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
> +			      &pix->height, 4, vin->info->max_height, 2, 0);
> +
> +	pix->bytesperline = rvin_format_bytesperline(pix);
> +	pix->sizeimage = rvin_format_sizeimage(pix);
> +
> +	if (vin->info->model == RCAR_M1 &&
> +	    pix->pixelformat == V4L2_PIX_FMT_XBGR32) {
> +		vin_err(vin, "pixel format XBGR32 not supported on M1\n");
> +		return -EINVAL;
> +	}

This can't happen as you set the pixel format to the default earlier in the 
same case.

> +	vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
> +		pix->width, pix->height, pix->bytesperline, pix->sizeimage);

While at it you could use %u for bpl and size.

> +
> +	return 0;
> +}
> +
>  /* ------------------------------------------------------------------------
>   * V4L2
>   */
> @@ -184,55 +237,14 @@ static int __rvin_try_format(struct rvin_dev *vin,
>  			     struct v4l2_pix_format *pix,
>  			     struct rvin_source_fmt *source)
>  {
> -	u32 walign;
>  	int ret;
> 
> -	if (!rvin_format_from_pixel(pix->pixelformat) ||
> -	    (vin->info->model == RCAR_M1 &&
> -	     pix->pixelformat == V4L2_PIX_FMT_XBGR32))
> -		pix->pixelformat = RVIN_DEFAULT_FORMAT;
> -
>  	/* Limit to source capabilities */
>  	ret = __rvin_try_format_source(vin, which, pix, source);

This functions uses the pixel format. Isn't it a problem that you don't first 
set it to the default if the requested pixel format isn't supported ?

>  	if (ret)
>  		return ret;
> 
> -	switch (pix->field) {
> -	case V4L2_FIELD_TOP:
> -	case V4L2_FIELD_BOTTOM:
> -	case V4L2_FIELD_NONE:
> -	case V4L2_FIELD_INTERLACED_TB:
> -	case V4L2_FIELD_INTERLACED_BT:
> -	case V4L2_FIELD_INTERLACED:
> -		break;
> -	case V4L2_FIELD_ALTERNATE:
> -		/*
> -		 * Driver do not (yet) support outputting ALTERNATE to a
> -		 * userspace. It does support outputting INTERLACED so use
> -		 * the VIN hardware to combine the two fields.
> -		 */
> -		pix->field = V4L2_FIELD_INTERLACED;
> -		pix->height *= 2;
> -		break;
> -	default:
> -		pix->field = RVIN_DEFAULT_FIELD;
> -		break;
> -	}
> -
> -	/* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
> -	walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
> -
> -	/* Limit to VIN capabilities */
> -	v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
> -			      &pix->height, 4, vin->info->max_height, 2, 0);
> -
> -	pix->bytesperline = rvin_format_bytesperline(pix);
> -	pix->sizeimage = rvin_format_sizeimage(pix);
> -
> -	vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
> -		pix->width, pix->height, pix->bytesperline, pix->sizeimage);
> -
> -	return 0;
> +	return rvin_format_align(vin, pix);
>  }
> 
>  static int rvin_querycap(struct file *file, void *priv,


-- 
Regards,

Laurent Pinchart