From: "Igor M. Liplianin" <liplianin@me.by>
To: linux-media@vger.kernel.org
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Subject: [PATCH] cx23885: TeVii s471 card support
Date: Fri, 11 May 2012 18:45:42 +0300 [thread overview]
Message-ID: <7076158.oZb9Cn2ZhT@useri> (raw)
[-- Attachment #1: Type: text/plain, Size: 123 bytes --]
The card is similar to TeVii s470, but has different LNB power control.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
[-- Attachment #2: s471.patch --]
[-- Type: text/x-patch, Size: 3467 bytes --]
diff --git a/drivers/media/dvb/frontends/ds3000.c b/drivers/media/dvb/frontends/ds3000.c
index 6769fc4..668a1ef 100644
--- a/drivers/media/dvb/frontends/ds3000.c
+++ b/drivers/media/dvb/frontends/ds3000.c
@@ -935,7 +935,10 @@ static int ds3000_set_frontend(struct dvb_frontend *fe)
ds3000_writereg(state,
ds3000_dvbs2_init_tab[i],
ds3000_dvbs2_init_tab[i + 1]);
- ds3000_writereg(state, 0xfe, 0x98);
+ if (c->symbol_rate >= 30000000)
+ ds3000_writereg(state, 0xfe, 0x54);
+ else
+ ds3000_writereg(state, 0xfe, 0x98);
break;
default:
return 1;
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 19b5499..13739e0 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -497,6 +497,10 @@ struct cx23885_board cx23885_boards[] = {
.name = "TerraTec Cinergy T PCIe Dual",
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
+ },
+ [CX23885_BOARD_TEVII_S471] = {
+ .name = "TeVii S471",
+ .portb = CX23885_MPEG_DVB,
}
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -705,6 +709,10 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x153b,
.subdevice = 0x117e,
.card = CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL,
+ }, {
+ .subvendor = 0xd471,
+ .subdevice = 0x9022,
+ .card = CX23885_BOARD_TEVII_S471,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -1460,6 +1468,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_TEVII_S471:
case CX23885_BOARD_DVBWORLD_2005:
ts1->gen_ctrl_val = 0x5; /* Parallel */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 6ad2270..697728f 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -1046,6 +1046,13 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
if (cx23885_boards[dev->board].ci_type > 0)
cx_clear(RDR_RDRCTL1, 1 << 8);
+ switch (dev->board) {
+ case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_TEVII_S471:
+ cx_clear(RDR_RDRCTL1, 1 << 8);
+ break;
+ }
+
return 0;
}
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 54a2781..67140be 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -1185,6 +1185,13 @@ static int dvb_register(struct cx23885_tsport *port)
break;
}
break;
+ case CX23885_BOARD_TEVII_S471:
+ i2c_bus = &dev->i2c_bus[1];
+
+ fe0->dvb.frontend = dvb_attach(ds3000_attach,
+ &tevii_ds3000_config,
+ &i2c_bus->i2c_adap);
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index f020f05..d884784 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -89,6 +89,7 @@
#define CX23885_BOARD_MPX885 32
#define CX23885_BOARD_MYGICA_X8507 33
#define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34
+#define CX23885_BOARD_TEVII_S471 35
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
reply other threads:[~2012-05-11 15:45 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7076158.oZb9Cn2ZhT@useri \
--to=liplianin@me.by \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox