From: Ruth Fernandez <larrykathy3@verizon.net>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Geniatech x8000 thriller
Date: Sun, 2 Nov 2008 07:22:18 -0800 (PST) [thread overview]
Message-ID: <759163.14018.qm@web84101.mail.mud.yahoo.com> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 3994 bytes --]
I have a Geniatech x8000 thriller ATSC card. The only way Ubuntu will see it is with the ismod option in the etc/modprobe.d/option file. The ATSC part is not recognized. Plus there is no sound. Can you help. Larry -dmesg below
44.901324] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
[ 44.901560] cx88[0]: subsystem: 14f1:1419, board: Geniatech X8000-MT DVBT [card=63,insmod option], frontend(s): 1
[ 44.901565] cx88[0]: TV tuner type 71, Radio tuner type 0
[ 44.981249] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 45.164340] tuner' 1-0061: chip found @ 0xc2 (cx88[0])
[ 45.681603] xc2028 1-0061: creating new instance
[ 45.681609] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[ 45.681618] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw
[ 45.681631] cx88[0]/2: cx2388x 8802 Driver Manager
[ 45.681658] ACPI: PCI Interrupt 0000:00:0c.2[A] -> GSI 16 (level, low) -> IRQ 19
[ 45.681674] cx88[0]/2: found at 0000:00:0c.2, rev: 5, irq: 19, latency: 32, mmio: 0xf6000000
[ 45.681698] cx8802_probe() allocating 1 frontend(s)
[ 45.681904] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 45.681916] cx88[0]/0: found at 0000:00:0c.0, rev: 5, irq: 19, latency: 32, mmio: 0xf4000000
[ 45.681985] cx88[0]/0: registered device video0 [v4l2]
[ 45.682018] cx88[0]/0: registered device vbi0
[ 45.682051] cx88[0]/0: registered device radio0
[ 45.768992] cx88_dvb: Unknown parameter `card'
[ 46.079711] NET: Registered protocol family 17
[ 47.330152] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 47.330337] cx88[0]: Calling XC2028/3028 callback
[ 47.530494] xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 47.530502] cx88[0]: Calling XC2028/3028 callback
[ 49.042136] xc2028 1-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 49.064305] xc2028 1-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 49.099919] xc2028 1-0061: Incorrect readback of firmware version.
[ 49.158010] cx88[0]: Calling XC2028/3028 callback
[ 49.361081] xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 49.361089] cx88[0]: Calling XC2028/3028 callback
[ 50.860783] xc2028 1-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 50.882947] xc2028 1-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 50.966673] cx88[0]: Calling XC2028/3028 callback
[ 51.086790] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 20
[ 51.086954] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 52.489700] loop: module loaded
[ 52.514208] lp0: using parport0 (interrupt-driven).
[ 52.614795] Adding 6072528k swap on /dev/sdb5. Priority:-1 extents:1 across:6072528k
[ 53.177612] EXT3 FS on sdb1, internal journal
[ 53.741721] NET: Registered protocol family 10
[ 53.742225] lo: Disabled Privacy Extensions
[ 54.549762] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 55.028420] No dock devices found.
[ 56.643293] capifs: Rev 1.1.2.3
[ 58.230204] audit(1225633869.241:2): type=1503 operation="capable" name="sys_resource" pid=5164 profile="/usr/sbin/named" namespace="default"
[ 60.296371] apm: BIOS not found.
[ 60.865343] ppdev: user-space parallel port driver
[ 60.960941] audit(1225633871.973:3): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5421 profile="/usr/sbin/cupsd" namespace="default"
[ 63.502560] cx88[0]: Calling XC2028/3028 callback
[ 63.702671] xc2028 1-0061: Loading firmware for type=BASE FM (401), id 0000000000000000.
[ 63.702681] cx88[0]: Calling XC2028/3028 callback
[ 63.767201] eth0: no IPv6 routers present
[ 65.190478] xc2028 1-0061: Loading firmware for type=FM (400), id 0000000000000000.
[-- Attachment #1.2: Type: text/html, Size: 4761 bytes --]
[-- Attachment #2: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-11-02 15:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-02 15:22 Ruth Fernandez [this message]
2008-11-09 4:19 ` [linux-dvb] Geniatech x8000 thriller CityK
[not found] <912472.64545.qm@web84108.mail.mud.yahoo.com>
2008-11-12 2:02 ` CityK
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=759163.14018.qm@web84101.mail.mud.yahoo.com \
--to=larrykathy3@verizon.net \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox