Re: [PATCH v2 01/13] media: saa7134: rename i2c_dbg() to saa7134_i2c_dbg()

[Hans Verkuil <hverkuil+cisco@kernel.org>]

Hi Bartosz,

Apologize, the earlier patches for this fell through the cracks so never
made it to v7.0.

For this v2:

Acked-by: Hans Verkuil <hverkuil+cisco@kernel.org>

Do you want to merge this through the i2c subsystem? Or do you want me to
merge this patch through the media subsystem?

Regards,

	Hans

On 23/02/2026 09:59, Bartosz Golaszewski wrote:
> Ahead of introducing I2C-adapter-specific printk() helpers, preemptively
> avoid a conflict with the upcoming i2c_dbg() and rename the local macro
> in the saa7134 driver to saa7134_i2c_dbg().
> 
> Suggested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
> ---
>  drivers/media/pci/saa7134/saa7134-i2c.c | 26 +++++++++++++-------------
>  1 file changed, 13 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/media/pci/saa7134/saa7134-i2c.c b/drivers/media/pci/saa7134/saa7134-i2c.c
> index 04e85765373ecc0f0759eba539c20bcdc9716ca8..1164e91cbb7b7f5250dc02bc086f5cc06ea8f5a5 100644
> --- a/drivers/media/pci/saa7134/saa7134-i2c.c
> +++ b/drivers/media/pci/saa7134/saa7134-i2c.c
> @@ -28,7 +28,7 @@ static unsigned int i2c_scan;
>  module_param(i2c_scan, int, 0444);
>  MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
>  
> -#define i2c_dbg(level, fmt, arg...) do { \
> +#define saa7134_i2c_dbg(level, fmt, arg...) do { \
>  	if (i2c_debug == level) \
>  		printk(KERN_DEBUG pr_fmt("i2c: " fmt), ## arg); \
>  	} while (0)
> @@ -84,20 +84,20 @@ static inline enum i2c_status i2c_get_status(struct saa7134_dev *dev)
>  	enum i2c_status status;
>  
>  	status = saa_readb(SAA7134_I2C_ATTR_STATUS) & 0x0f;
> -	i2c_dbg(2, "i2c stat <= %s\n", str_i2c_status[status]);
> +	saa7134_i2c_dbg(2, "i2c stat <= %s\n", str_i2c_status[status]);
>  	return status;
>  }
>  
>  static inline void i2c_set_status(struct saa7134_dev *dev,
>  				  enum i2c_status status)
>  {
> -	i2c_dbg(2, "i2c stat => %s\n", str_i2c_status[status]);
> +	saa7134_i2c_dbg(2, "i2c stat => %s\n", str_i2c_status[status]);
>  	saa_andorb(SAA7134_I2C_ATTR_STATUS,0x0f,status);
>  }
>  
>  static inline void i2c_set_attr(struct saa7134_dev *dev, enum i2c_attr attr)
>  {
> -	i2c_dbg(2, "i2c attr => %s\n", str_i2c_attr[attr]);
> +	saa7134_i2c_dbg(2, "i2c attr => %s\n", str_i2c_attr[attr]);
>  	saa_andorb(SAA7134_I2C_ATTR_STATUS,0xc0,attr << 6);
>  }
>  
> @@ -160,7 +160,7 @@ static int i2c_reset(struct saa7134_dev *dev)
>  	enum i2c_status status;
>  	int count;
>  
> -	i2c_dbg(2, "i2c reset\n");
> +	saa7134_i2c_dbg(2, "i2c reset\n");
>  	status = i2c_get_status(dev);
>  	if (!i2c_is_error(status))
>  		return true;
> @@ -198,7 +198,7 @@ static inline int i2c_send_byte(struct saa7134_dev *dev,
>  //	dword |= 0x40 << 16;  /* 400 kHz */
>  	dword |= 0xf0 << 24;
>  	saa_writel(SAA7134_I2C_ATTR_STATUS >> 2, dword);
> -	i2c_dbg(2, "i2c data => 0x%x\n", data);
> +	saa7134_i2c_dbg(2, "i2c data => 0x%x\n", data);
>  
>  	if (!i2c_is_busy_wait(dev))
>  		return -EIO;
> @@ -220,7 +220,7 @@ static inline int i2c_recv_byte(struct saa7134_dev *dev)
>  	if (i2c_is_error(status))
>  		return -EIO;
>  	data = saa_readb(SAA7134_I2C_DATA);
> -	i2c_dbg(2, "i2c data <= 0x%x\n", data);
> +	saa7134_i2c_dbg(2, "i2c data <= 0x%x\n", data);
>  	return data;
>  }
>  
> @@ -237,12 +237,12 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
>  		if (!i2c_reset(dev))
>  			return -EIO;
>  
> -	i2c_dbg(2, "start xfer\n");
> -	i2c_dbg(1, "i2c xfer:");
> +	saa7134_i2c_dbg(2, "start xfer\n");
> +	saa7134_i2c_dbg(1, "i2c xfer:");
>  	for (i = 0; i < num; i++) {
>  		if (!(msgs[i].flags & I2C_M_NOSTART) || 0 == i) {
>  			/* send address */
> -			i2c_dbg(2, "send address\n");
> +			saa7134_i2c_dbg(2, "send address\n");
>  			addr  = msgs[i].addr << 1;
>  			if (msgs[i].flags & I2C_M_RD)
>  				addr |= 1;
> @@ -265,7 +265,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
>  		}
>  		if (msgs[i].flags & I2C_M_RD) {
>  			/* read bytes */
> -			i2c_dbg(2, "read bytes\n");
> +			saa7134_i2c_dbg(2, "read bytes\n");
>  			for (byte = 0; byte < msgs[i].len; byte++) {
>  				i2c_cont(1, " =");
>  				rc = i2c_recv_byte(dev);
> @@ -286,7 +286,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
>  			}
>  		} else {
>  			/* write bytes */
> -			i2c_dbg(2, "write bytes\n");
> +			saa7134_i2c_dbg(2, "write bytes\n");
>  			for (byte = 0; byte < msgs[i].len; byte++) {
>  				data = msgs[i].buf[byte];
>  				i2c_cont(1, " %02x", data);
> @@ -296,7 +296,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
>  			}
>  		}
>  	}
> -	i2c_dbg(2, "xfer done\n");
> +	saa7134_i2c_dbg(2, "xfer done\n");
>  	i2c_cont(1, " >");
>  	i2c_set_attr(dev,STOP);
>  	rc = -EIO;
>