From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from webmail.icp-qv1-irony-out1.iinet.net.au ([203.59.1.146]:45443 "EHLO webmail.icp-qv1-irony-out1.iinet.net.au" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751125AbZGFROv convert rfc822-to-8bit (ORCPT ); Mon, 6 Jul 2009 13:14:51 -0400 Content-Disposition: inline Content-Transfer-Encoding: 7BIT Content-Type: text/plain; charset=US-ASCII MIME-Version: 1.0 From: "sonofzev@iinet.net.au" To: linux-media@vger.kernel.org, 'Collier Family' Subject: Re: DVICO Fusion Dual Express Reply-To: sonofzev@iinet.net.au Date: Tue, 07 Jul 2009 01:04:51 +0800 Message-Id: <7978.1246899891@iinet.net.au> Sender: linux-media-owner@vger.kernel.org List-ID: Hi there I get this error message on some of my motherboards but not all, only when another tuner is in the machine.. I think this was IRQ sharing related. When I have it on a newer board with more interrupts it seems to work fine On Mon Jul 6 20:21 , "Collier Family" sent: >I have a Dvico Fusion Dual Express. It is unfortunately rev 4 and the >firmware is not correct. > >lspci -vv -nn > >04:00.0 0400: 14f1:8852 (rev 04) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Step >ping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > >SERR- > Latency: 0 > Interrupt: pin A routed to IRQ 193 > Region 0: Memory at 57200000 (64-bit, non-prefetchable) [size=2M] > Capabilities: [40] Express Endpoint IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, >ExtTag- > Device: Latency L0s > Device: AtnBtn- AtnInd- PwrInd- > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 512 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0 > Link: Latency L0s > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x1 > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA >PME(D0+,D1+,D2+,D3hot >+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [90] Vital Product Data > Capabilities: [a0] Message Signalled Interrupts: 64bit+ Queue=0/0 >Enable >- > Address: 0000000000000000 Data: 0000 > >the system recognises it 2.6.18-128.1.10.el5 using >video4linux-20090415-88.0.4.el5.x86_64 from atrpms > >I'm getting the following from firmware load > >Jul 6 20:18:41 localhost kernel: xc2028 1-0061: Loading firmware for >type=BASE F8MHZ (3), id 0000000000000000. >Jul 6 20:18:42 localhost kernel: xc2028 1-0061: Loading firmware for >type=D2633 DTV7 (90), id 0000000000000000. >Jul 6 20:18:42 localhost kernel: xc2028 1-0061: Loading SCODE for type=DTV6 >QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id >0000000000000000. >Jul 6 20:18:42 localhost kernel: xc2028 1-0061: Incorrect readback of >firmware version. > >I suspect rev 4 uses different firmware. > >Any help would be greatly appreciated. > >Stephen > > > > > >-- >To unsubscribe from this list: send the line "unsubscribe linux-media" in >the body of a message to majordomo@vger.kernel.org >More majordomo info at http://vger.kernel.org/majordomo-info.html >)