Linux Media Controller development
 help / color / mirror / Atom feed
From: Vincenzo Frascino <vincenzo.frascino@arm.com>
To: Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
	Nayden.Kanchev@arm.com,
	Konstantin Babin <Konstantin.Babin@arm.com>,
	Anthony McGivern <anthony.mcgivern@arm.com>,
	linus.walleij@arm.com, laurent.pinchart@ideasonboard.com,
	Daniel Scally <dan.scally@ideasonboard.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Subject: Re: [PATCH v3 2/4] media: mali-c55: Implement CCM block validation
Date: Mon, 29 Jun 2026 08:52:09 +0100	[thread overview]
Message-ID: <7afdc0fa-343b-4159-a357-180d692c9dd2@arm.com> (raw)
In-Reply-To: <20260627-mali-c55-ccm-gamma-v3-2-113584c05174@ideasonboard.com>

Hi Jacopo,

thank you for your patch.

On 27/06/2026 15:29, Jacopo Mondi wrote:
> From: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
> 
> Implement validation of CCM block parameters.
> 
> CCM coefficients are expressed as 13 bits signed Q4.8 format and their
> raw value cannot be higher than 8191 (BIT(13) - 1).
> 
> CCM gains are expressed as unsigned 12 bits Q4.8 format and their raw
> value cannot be higher than 4095 (BIT(12) - 1).
> 
> CCM offsets are 12 bits unsigned integers and their value cannot be
> higher than 4095 (BIT(12) - 1).
> 
> Validate the parameters provided by userspace using the .block_validate
> callback of struct v4l2_isp_params_block_type_info.
> 
> Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
>

I have a couple of comments. With this:

Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>

> ---
> v3:
> - new patch
> ---
>  .../media/platform/arm/mali-c55/mali-c55-params.c  | 36 ++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-params.c b/drivers/media/platform/arm/mali-c55/mali-c55-params.c
> index 0da5215c52c3..333e66ee3923 100644
> --- a/drivers/media/platform/arm/mali-c55/mali-c55-params.c
> +++ b/drivers/media/platform/arm/mali-c55/mali-c55-params.c
> @@ -477,6 +477,41 @@ static const mali_c55_params_handler mali_c55_params_handlers[] = {
>  	[MALI_C55_PARAM_BLOCK_CCM] = &mali_c55_params_ccm,
>  };
>  
> +static int mali_c55_ccm_validate(struct device *dev,
> +				 const struct v4l2_isp_block_header *block)
> +{
> +	const struct mali_c55_params_ccm *ccm =
> +		(const struct mali_c55_params_ccm *)(block);
> +
> +	for (unsigned int i = 0; i < 3; i++) {
> +

Nit: extra blank line after the for opening brace, kernel style usually avoids this.

> +		for (unsigned int j = 0; j < 3; j++) {
> +			/* Coefficients are 13 bits signed Q4.8. */
> +			if (ccm->coeffs[i][j] > 8191) {

No magic numbers please :) Maybe use GENMASK(12, 0) or BIT(13) - 1 for
readability and consistency with the commit message, and similarly GENMASK(11,
0) or BIT(12) - 1 for gains and offsets. This also avoids magic numbers in
validation. The same could be applied to the other cases in this patch.

> +				dev_dbg(dev, "Invalid ccm coefficient %u\n",
> +					ccm->coeffs[i][j]);
> +				return -EINVAL;
> +			}
> +		}
> +
> +		/* Gains are 12 bits unsigned Q4.8. */
> +		if (ccm->gains[i] > 4095) {
> +			dev_dbg(dev, "Invalid ccm gain %u\n",
> +				ccm->gains[i]);
> +			return -EINVAL;
> +		}
> +
> +		/* Offsets are 12 bits unsigned integers. */
> +		if (ccm->offs[i] > 4095) {
> +			dev_dbg(dev, "Invalid ccm offset %u\n",
> +				ccm->offs[i]);
> +			return -EINVAL;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
>  static const struct v4l2_isp_params_block_type_info
>  mali_c55_params_block_types_info[] = {
>  	[MALI_C55_PARAM_BLOCK_SENSOR_OFFS] = {
> @@ -514,6 +549,7 @@ mali_c55_params_block_types_info[] = {
>  	},
>  	[MALI_C55_PARAM_BLOCK_CCM] = {
>  		.size = sizeof(struct mali_c55_params_ccm),
> +		.block_validate = mali_c55_ccm_validate,
>  	},
>  };
>  
> 

-- 
Regards,
Vincenzo


  reply	other threads:[~2026-06-29  7:52 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-27 14:29 [PATCH v3 0/4] media: mali-c55: Add support for CCM and Gamma Jacopo Mondi
2026-06-27 14:29 ` [PATCH v3 1/4] media: mali-c55: Add support for CCM Jacopo Mondi
2026-06-27 14:29 ` [PATCH v3 2/4] media: mali-c55: Implement CCM block validation Jacopo Mondi
2026-06-29  7:52   ` Vincenzo Frascino [this message]
2026-06-29  9:15     ` Jacopo Mondi
2026-06-29  9:57   ` Laurent Pinchart
2026-06-29 11:08     ` Vincenzo Frascino
2026-06-29 11:33       ` Jacopo Mondi
2026-06-29 13:07         ` Vincenzo Frascino
2026-06-29 12:05       ` Laurent Pinchart
2026-06-29 13:17         ` Vincenzo Frascino
2026-06-29 13:32           ` Laurent Pinchart
2026-06-29 13:42             ` Vincenzo Frascino
2026-06-27 14:29 ` [PATCH v3 3/4] media: mali-c55: Add support for RGB Gamma Jacopo Mondi
2026-06-27 14:29 ` [PATCH v3 4/4] media: mali-c55: Implement Gamma block validation Jacopo Mondi
2026-06-29  8:10   ` Vincenzo Frascino
2026-06-29  9:19     ` Jacopo Mondi
2026-06-29 10:14       ` Vincenzo Frascino
2026-06-29 10:20   ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7afdc0fa-343b-4159-a357-180d692c9dd2@arm.com \
    --to=vincenzo.frascino@arm.com \
    --cc=Konstantin.Babin@arm.com \
    --cc=Nayden.Kanchev@arm.com \
    --cc=anthony.mcgivern@arm.com \
    --cc=dan.scally@ideasonboard.com \
    --cc=jacopo.mondi+renesas@ideasonboard.com \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linus.walleij@arm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox