Re: [PATCH v6 1/2] dt-bindings: media: i2c: Add bindings for Maxim Integrated MAX9286

[Kieran Bingham <kieran.bingham@ideasonboard.com>]

Thanks Rob,

On 18/12/2019 18:13, Rob Herring wrote:
> On Wed, Dec 11, 2019 at 12:44:58PM +0000, Kieran Bingham wrote:
>> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
>>
>> The MAX9286 deserializes video data received on up to 4 Gigabit
>> Multimedia Serial Links (GMSL) and outputs them on a CSI-2 port using up
>> to 4 data lanes.
>>
>> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
>> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
>> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
>> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
>> ---
>>  .../bindings/media/i2c/maxim,max9286.yaml     | 289 ++++++++++++++++++
>>  1 file changed, 289 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> 
> A couple of nits, with those fixed:

I'll fix them up :-D
Thank you very much.

Converting this to YAML picked up a few issues in our DTS - so it
certainly seems very worthwhile!

--
Kieran


> Reviewed-by: Rob Herring <robh@kernel.org>
> 
>>
>> diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
>> new file mode 100644
>> index 000000000000..d37ea2c432f6
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
>> @@ -0,0 +1,289 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
> 
> Dual license new bindings please:
> 
> (GPL-2.0-only OR BSD-2-Clause)

That's two of those I've got to fix up for you :D. I'll make sure all
new ones I add have this correctly presented.


>> +# Copyright (C) 2019 Renesas Electronics Corp.
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/media/i2c/maxim,max9286.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Maxim Integrated Quad GMSL Deserializer
>> +
>> +maintainers:
>> +  - Jacopo Mondi <jacopo+renesas@jmondi.org>
>> +  - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>> +  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
>> +  - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
>> +
>> +description: -|
> 
> I usually see '|-', but I guess that works.

Oh, I'm happy to change to conform to whatever is the accepted norm...

> 
>> +  The MAX9286 deserializer receives video data on up to 4 Gigabit Multimedia
>> +  Serial Links (GMSL) and outputs them on a CSI-2 D-PHY port using up to 4 data
>> +  lanes.
>> +
>> +  In addition to video data, the GMSL links carry a bidirectional control
>> +  channel that encapsulates I2C messages. The MAX9286 forwards all I2C traffic
>> +  not addressed to itself to the other side of the links, where a GMSL
>> +  serializer will output it on a local I2C bus. In the other direction all I2C
>> +  traffic received over GMSL by the MAX9286 is output on the local I2C bus.
>> +
>> +properties:
>> +  '#address-cells':
>> +    const: 1
>> +
>> +  '#size-cells':
>> +    const: 0
>> +
>> +  compatible:
>> +    const: maxim,max9286
>> +
>> +  reg:
>> +    description: I2C device address
>> +    maxItems: 1
>> +
>> +  poc-supply:
>> +    description: Regulator providing Power over Coax to the cameras
>> +    maxItems: 1
>> +
>> +  enable-gpios:
>> +    description: GPIO connected to the \#PWDN pin with inverted polarity
>> +    maxItems: 1
>> +
>> +  ports:
>> +    type: object
>> +    description: -|
>> +      The connections to the MAX9286 GMSL and its endpoint nodes are modelled
>> +      using the OF graph bindings in accordance with the video interface
>> +      bindings defined in
>> +      Documentation/devicetree/bindings/media/video-interfaces.txt.
>> +
>> +      The following table lists the port number corresponding to each device
>> +      port.
>> +
>> +        Port            Description
>> +        ----------------------------------------
>> +        Port 0          GMSL Input 0
>> +        Port 1          GMSL Input 1
>> +        Port 2          GMSL Input 2
>> +        Port 3          GMSL Input 3
>> +        Port 4          CSI-2 Output
>> +
>> +    properties:
>> +      '#address-cells':
>> +        const: 1
>> +
>> +      '#size-cells':
>> +        const: 0
>> +
>> +      port@[0-3]:
>> +        type: object
>> +        properties:
>> +          reg:
>> +            enum: [ 0, 1, 2, 3 ]
>> +
>> +          endpoint:
>> +            type: object
>> +
>> +            properties:
>> +              remote-endpoint:
>> +                description: -|
>> +                 phandle to the remote GMSL source endpoint subnode in the
>> +                 remote node port.
>> +                maxItems: 1
> 
> This is not an array. You can just drop and assume it has a type defined 
> elsewhere.
> 

Will fix and validate.

>> +
>> +            required:
>> +              - remote-endpoint
>> +
>> +        required:
>> +          - reg
>> +          - endpoint
>> +
>> +        additionalProperties: false
>> +
>> +      port@4:
>> +        type: object
>> +        properties:
>> +          reg:
>> +            const: 4
>> +
>> +          endpoint:
>> +            type: object
>> +
>> +            properties:
>> +              remote-endpoint:
>> +                description: phandle to the remote CSI-2 sink endpoint.
>> +                maxItems: 1
> 
> And here.

Likewise.

> 
>> +
>> +              data-lanes:
>> +                description: array of physical CSI-2 data lane indexes.
>> +
>> +            required:
>> +              - remote-endpoint
>> +              - data-lanes
>> +
>> +        required:
>> +          - reg
>> +          - endpoint
>> +
>> +        additionalProperties: false
>> +
>> +    required:
>> +      - port@4
>> +
>> +  i2c-mux:
>> +    type: object
>> +    description: -|
>> +      Each GMSL link is modelled as a child bus of an i2c bus
>> +      multiplexer/switch, in accordance with bindings described in
>> +      Documentation/devicetree/bindings/i2c/i2c-mux.txt. The serializer
>> +      device on the remote end of the GMSL link shall be modelled as a child
>> +      node of the corresponding I2C bus.
>> +
>> +    properties:
>> +      '#address-cells':
>> +        const: 1
>> +
>> +      '#size-cells':
>> +        const: 0
>> +
>> +  additionalProperties: false
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - ports
>> +  - i2c-mux
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/gpio/gpio.h>
>> +
>> +    i2c@e66d8000 {
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +
>> +      reg = <0 0xe66d8000 0 0x40>;
>> +
>> +      gmsl-deserializer@2c {
>> +        compatible = "maxim,max9286";
>> +        reg = <0x2c>;
>> +        poc-supply = <&camera_poc_12v>;
>> +        enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
>> +
>> +        ports {
>> +          #address-cells = <1>;
>> +          #size-cells = <0>;
>> +
>> +          port@0 {
>> +            reg = <0>;
>> +
>> +            max9286_in0: endpoint {
>> +              remote-endpoint = <&rdacm20_out0>;
>> +            };
>> +          };
>> +
>> +          port@1 {
>> +            reg = <1>;
>> +
>> +            max9286_in1: endpoint {
>> +              remote-endpoint = <&rdacm20_out1>;
>> +            };
>> +          };
>> +
>> +          port@2 {
>> +            reg = <2>;
>> +
>> +            max9286_in2: endpoint {
>> +              remote-endpoint = <&rdacm20_out2>;
>> +            };
>> +          };
>> +
>> +          port@3 {
>> +            reg = <3>;
>> +
>> +            max9286_in3: endpoint {
>> +              remote-endpoint = <&rdacm20_out3>;
>> +            };
>> +          };
>> +
>> +          port@4 {
>> +            reg = <4>;
>> +
>> +            max9286_out: endpoint {
>> +              data-lanes = <1 2 3 4>;
>> +              remote-endpoint = <&csi40_in>;
>> +            };
>> +          };
>> +        };
>> +
>> +        i2c-mux {
>> +          #address-cells = <1>;
>> +          #size-cells = <0>;
>> +
>> +          i2c@0 {
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +
>> +            reg = <0>;
>> +
>> +            camera@51 {
>> +              reg = <0x51>;
>> +
>> +              port {
>> +                rdacm20_out0: endpoint {
>> +                  remote-endpoint = <&max9286_in0>;
>> +                };
>> +              };
>> +
>> +            };
>> +          };
>> +
>> +          i2c@1 {
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +            reg = <1>;
>> +
>> +            camera@52 {
>> +              reg = <0x52>;
>> +
>> +              port {
>> +                rdacm20_out1: endpoint {
>> +                  remote-endpoint = <&max9286_in1>;
>> +                };
>> +              };
>> +            };
>> +          };
>> +
>> +          i2c@2 {
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +            reg = <2>;
>> +
>> +            camera@53 {
>> +              reg = <0x53>;
>> +
>> +              port {
>> +                rdacm20_out2: endpoint {
>> +                  remote-endpoint = <&max9286_in2>;
>> +                };
>> +              };
>> +            };
>> +          };
>> +
>> +          i2c@3 {
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +            reg = <3>;
>> +
>> +            camera@54 {
>> +              reg = <0x54>;
>> +
>> +              port {
>> +                rdacm20_out3: endpoint {
>> +                  remote-endpoint = <&max9286_in3>;
>> +                };
>> +              };
>> +            };
>> +          };
>> +        };
>> +      };
>> +    };
>> -- 
>> 2.20.1
>>


-- 
Regards
--
Kieran