public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Kevin Hilman <khilman@deeprootsystems.com>
To: m-karicheri2@ti.com
Cc: linux-media@vger.kernel.org, hverkuil@xs4all.nl,
	davinci-linux-open-source@linux.davincidsp.com
Subject: Re: [PATCH - v3 4/4] DaVinci - vpfe-capture-converting ccdc drivers to platform driver
Date: Tue, 05 Jan 2010 15:28:02 -0800	[thread overview]
Message-ID: <871vi4rv25.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1260895054-13232-1-git-send-email-m-karicheri2@ti.com> (m-karicheri2@ti.com's message of "Tue\, 15 Dec 2009 11\:37\:31 -0500")

m-karicheri2@ti.com writes:

> From: Muralidharan Karicheri <m-karicheri2@ti.com>
>
> This combines the two patches sent earlier to change the clock configuration
> and converting ccdc drivers to platform drivers. This has updated comments
> against v2 of these patches. Two new clocks "master" and "slave" are defined for ccdc driver
> as per comments from Kevin Hilman.
>
> This adds platform code for ccdc driver on DM355 and DM6446.
>
> Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com>
> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
>
> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
> ---
> Applies to linux-davinci tree
>  arch/arm/mach-davinci/dm355.c  |   41 ++++++++++++++++++++++++++++-----------
>  arch/arm/mach-davinci/dm644x.c |   20 ++++++++++++++++++-
>  2 files changed, 48 insertions(+), 13 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
> index 2244e8c..a9ea761 100644
> --- a/arch/arm/mach-davinci/dm355.c
> +++ b/arch/arm/mach-davinci/dm355.c
> @@ -378,6 +378,8 @@ static struct davinci_clk dm355_clks[] = {
>  	CLK(NULL, "timer3", &timer3_clk),
>  	CLK(NULL, "rto", &rto_clk),
>  	CLK(NULL, "usb", &usb_clk),
> +	CLK("dm355_ccdc", "master", &vpss_master_clk),
> +	CLK("dm355_ccdc", "slave", &vpss_slave_clk),

I still don't understand why you have to add new entries here and
can't simply rename the existing CLK nodes using vpss_*_clk.  

Same comment for dm644x.c changes.

Kevin

>  	CLK(NULL, NULL, NULL),
>  };
>  
> @@ -665,6 +667,17 @@ static struct platform_device dm355_asp1_device = {
>  	.resource	= dm355_asp1_resources,
>  };
>  
> +static void dm355_ccdc_setup_pinmux(void)
> +{
> +	davinci_cfg_reg(DM355_VIN_PCLK);
> +	davinci_cfg_reg(DM355_VIN_CAM_WEN);
> +	davinci_cfg_reg(DM355_VIN_CAM_VD);
> +	davinci_cfg_reg(DM355_VIN_CAM_HD);
> +	davinci_cfg_reg(DM355_VIN_YIN_EN);
> +	davinci_cfg_reg(DM355_VIN_CINL_EN);
> +	davinci_cfg_reg(DM355_VIN_CINH_EN);
> +}
> +
>  static struct resource dm355_vpss_resources[] = {
>  	{
>  		/* VPSS BL Base address */
> @@ -701,6 +714,10 @@ static struct resource vpfe_resources[] = {
>  		.end            = IRQ_VDINT1,
>  		.flags          = IORESOURCE_IRQ,
>  	},
> +};
> +
> +static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
> +static struct resource dm355_ccdc_resource[] = {
>  	/* CCDC Base address */
>  	{
>  		.flags          = IORESOURCE_MEM,
> @@ -708,8 +725,18 @@ static struct resource vpfe_resources[] = {
>  		.end            = 0x01c70600 + 0x1ff,
>  	},
>  };
> +static struct platform_device dm355_ccdc_dev = {
> +	.name           = "dm355_ccdc",
> +	.id             = -1,
> +	.num_resources  = ARRAY_SIZE(dm355_ccdc_resource),
> +	.resource       = dm355_ccdc_resource,
> +	.dev = {
> +		.dma_mask               = &vpfe_capture_dma_mask,
> +		.coherent_dma_mask      = DMA_BIT_MASK(32),
> +		.platform_data		= dm355_ccdc_setup_pinmux,
> +	},
> +};
>  
> -static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
>  static struct platform_device vpfe_capture_dev = {
>  	.name		= CAPTURE_DRV_NAME,
>  	.id		= -1,
> @@ -860,17 +887,7 @@ static int __init dm355_init_devices(void)
>  	davinci_cfg_reg(DM355_INT_EDMA_CC);
>  	platform_device_register(&dm355_edma_device);
>  	platform_device_register(&dm355_vpss_device);
> -	/*
> -	 * setup Mux configuration for vpfe input and register
> -	 * vpfe capture platform device
> -	 */
> -	davinci_cfg_reg(DM355_VIN_PCLK);
> -	davinci_cfg_reg(DM355_VIN_CAM_WEN);
> -	davinci_cfg_reg(DM355_VIN_CAM_VD);
> -	davinci_cfg_reg(DM355_VIN_CAM_HD);
> -	davinci_cfg_reg(DM355_VIN_YIN_EN);
> -	davinci_cfg_reg(DM355_VIN_CINL_EN);
> -	davinci_cfg_reg(DM355_VIN_CINH_EN);
> +	platform_device_register(&dm355_ccdc_dev);
>  	platform_device_register(&vpfe_capture_dev);
>  
>  	return 0;
> diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
> index e65e29e..e5f1ee9 100644
> --- a/arch/arm/mach-davinci/dm644x.c
> +++ b/arch/arm/mach-davinci/dm644x.c
> @@ -315,6 +315,8 @@ struct davinci_clk dm644x_clks[] = {
>  	CLK(NULL, "timer0", &timer0_clk),
>  	CLK(NULL, "timer1", &timer1_clk),
>  	CLK("watchdog", NULL, &timer2_clk),
> +	CLK("dm644x_ccdc", "master", &vpss_master_clk),
> +	CLK("dm644x_ccdc", "slave", &vpss_slave_clk),
>  	CLK(NULL, NULL, NULL),
>  };
>  
> @@ -612,6 +614,11 @@ static struct resource vpfe_resources[] = {
>  		.end            = IRQ_VDINT1,
>  		.flags          = IORESOURCE_IRQ,
>  	},
> +};
> +
> +static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
> +static struct resource dm644x_ccdc_resource[] = {
> +	/* CCDC Base address */
>  	{
>  		.start          = 0x01c70400,
>  		.end            = 0x01c70400 + 0xff,
> @@ -619,7 +626,17 @@ static struct resource vpfe_resources[] = {
>  	},
>  };
>  
> -static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
> +static struct platform_device dm644x_ccdc_dev = {
> +	.name           = "dm644x_ccdc",
> +	.id             = -1,
> +	.num_resources  = ARRAY_SIZE(dm644x_ccdc_resource),
> +	.resource       = dm644x_ccdc_resource,
> +	.dev = {
> +		.dma_mask               = &vpfe_capture_dma_mask,
> +		.coherent_dma_mask      = DMA_BIT_MASK(32),
> +	},
> +};
> +
>  static struct platform_device vpfe_capture_dev = {
>  	.name		= CAPTURE_DRV_NAME,
>  	.id		= -1,
> @@ -772,6 +789,7 @@ static int __init dm644x_init_devices(void)
>  	platform_device_register(&dm644x_edma_device);
>  	platform_device_register(&dm644x_emac_device);
>  	platform_device_register(&dm644x_vpss_device);
> +	platform_device_register(&dm644x_ccdc_dev);
>  	platform_device_register(&vpfe_capture_dev);
>  
>  	return 0;
> -- 
> 1.6.0.4

  parent reply	other threads:[~2010-01-05 23:34 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-12-15 16:37 [PATCH - v3 4/4] DaVinci - vpfe-capture-converting ccdc drivers to platform driver m-karicheri2
2009-12-15 16:37 ` [PATCH - v3 2/4] V4L - vpfe capture - convert dm355 ccdc driver to a " m-karicheri2
2009-12-15 16:37   ` [PATCH - v3 3/4] V4L - vpfe capture - convert dm644x ccdc module " m-karicheri2
2009-12-15 16:37     ` [PATCH - v3 1/4] V4L - vpfe_capture - remove clock and ccdc resource handling m-karicheri2
2010-01-05 23:28 ` Kevin Hilman [this message]
2010-01-06 14:44   ` [PATCH - v3 4/4] DaVinci - vpfe-capture-converting ccdc drivers to platform driver Karicheri, Muralidharan
2010-01-06 16:04     ` Kevin Hilman
2010-01-06 16:20       ` Karicheri, Muralidharan
2010-01-06 16:36         ` Kevin Hilman
2010-01-07 18:18           ` Karicheri, Muralidharan
2010-01-07 19:43             ` Kevin Hilman
2010-01-07 21:33               ` Karicheri, Muralidharan
2010-01-07 21:50                 ` Kevin Hilman
2010-01-07 23:25                   ` Karicheri, Muralidharan
2010-01-08  9:06                     ` Hiremath, Vaibhav
2010-01-08 15:10                       ` Kevin Hilman
2010-01-11  4:36                         ` Hiremath, Vaibhav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=871vi4rv25.fsf@deeprootsystems.com \
    --to=khilman@deeprootsystems.com \
    --cc=davinci-linux-open-source@linux.davincidsp.com \
    --cc=hverkuil@xs4all.nl \
    --cc=linux-media@vger.kernel.org \
    --cc=m-karicheri2@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox