linux-media.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mikhail Rudenko <mike.rudenko@gmail.com>
To: Changhuang Liang <changhuang.liang@starfivetech.com>
Cc: christophe.jaillet@wanadoo.fr, dave.stevenson@raspberrypi.com,
	jacopo@jmondi.org, laurent.pinchart@ideasonboard.com,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	mchehab@kernel.org, sakari.ailus@linux.intel.com,
	tomm.merciai@gmail.com
Subject: Re: [PATCH 4/4] media: i2c: ov4689: Implement 2x2 binning
Date: Tue, 13 Aug 2024 21:48:37 +0300	[thread overview]
Message-ID: <877cck2q8x.fsf@gmail.com> (raw)
In-Reply-To: <20240813124443.446703-1-changhuang.liang@starfivetech.com>


Hi, Changhuang

On 2024-08-13 at 05:44 -07, Changhuang Liang <changhuang.liang@starfivetech.com> wrote:

> Hi, Mikhail
>
> Thanks for your patch.
>
>>
>> Implement 2x2 binning support. Compute best binning mode (none or 2x2)
>> from pad crop and pad format in ov4689_set_fmt. Use output frame size
>> instead of analogue crop to compute control ranges and BLC anchors.
>>
>> Also move ov4689_hts_min and ov4689_update_ctrl_ranges, since they are
>> now also called from ov4689_set_fmt. Update frame timings to
>> accommodate the requirements of binning mode and avoid visual
>> artefacts. Additionally, report 2x2 binned mode in addition to
>> non-binned one in ov4689_enum_frame_sizes.
>>
>> Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
>
> Tested-by: Changhuang Liang <changhuang.liang@starfivetech.com>
>

Thanks for testing! It's good to see that this code has now been
independently verified as it contains a few bits that were obtained
through reverse engineering/trial and error that I was never entirely
sure of. (Of course I did lots of testing to ensure that all possible
crop+binning modes work as expected, but when datasheet lacks required
information, one can never be fully sure.)

>> ---
>>  drivers/media/i2c/ov4689.c | 179 ++++++++++++++++++++++++-------------
>>  1 file changed, 117 insertions(+), 62 deletions(-)
>>
>> diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c
>> index c4c7c462672a..1499fbe88b76 100644
>> --- a/drivers/media/i2c/ov4689.c
>> +++ b/drivers/media/i2c/ov4689.c
>> @@ -114,7 +114,7 @@
>>   * Minimum working vertical blanking value. Found experimentally at
>>   * minimum HTS values.
>>   */
>
> Regards,
> Changhuang


--
Best regards,
Mikhail Rudenko

  reply	other threads:[~2024-08-13 19:10 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-16 20:24 [PATCH 0/4] Omnivision OV4689 cropping and binning Mikhail Rudenko
2024-06-16 20:24 ` [PATCH 1/4] media: i2c: ov4689: Configurable analogue crop Mikhail Rudenko
2024-06-16 20:24 ` [PATCH 2/4] media: i2c: ov4689: Eliminate struct ov4689_mode Mikhail Rudenko
2024-06-16 20:24 ` [PATCH 3/4] media: i2c: ov4689: Refactor ov4689_s_stream Mikhail Rudenko
2024-06-16 20:24 ` [PATCH 4/4] media: i2c: ov4689: Implement 2x2 binning Mikhail Rudenko
2024-08-13 12:44   ` Changhuang Liang
2024-08-13 18:48     ` Mikhail Rudenko [this message]
2024-08-14 23:01 ` [PATCH 0/4] Omnivision OV4689 cropping and binning Mikhail Rudenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=877cck2q8x.fsf@gmail.com \
    --to=mike.rudenko@gmail.com \
    --cc=changhuang.liang@starfivetech.com \
    --cc=christophe.jaillet@wanadoo.fr \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=jacopo@jmondi.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tomm.merciai@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).