Re: Gadmei 380 on kernel 2.6.28.4

[Ming-Ching Tiew <mctiew@yahoo.com>]

Message below :-

> From: Ming-Ching Tiew <mctiew@yahoo.com>
> Subject: Re: Gadmei 380 on kernel 2.6.28.4
> To: linux-media@vger.kernel.org
> Date: Monday, October 12, 2009, 8:31 AM
> I did a dmesg, include please find
> the output. If you see
> carefully, towards the end, there is a USB driver error,
> and my KINGSTON usb thumb drive get disconnected and 
> reconnected again.
> 
> --- On Mon, 10/12/09, mctiew <mctiew@yahoo.com>
> wrote:
> 
> > From: mctiew <mctiew@yahoo.com>
> > Subject: Gadmei 380 on kernel 2.6.28.4
> > To: linux-media@vger.kernel.org
> > Date: Monday, October 12, 2009, 3:32 AM
> > 
> > I am trying to use the gadmei 380 which I bought
> > yesterday.
> > 
> > I am using kernel 2.6.28.4, I downloaded the entire
> > ~dougsland/em28xx
> > and did a make and install. Everything went on
> smoothly.
> > However,
> > when I plug in the gadmei 380 usb device, it seems
> the
> > driver can 
> > get loaded by the usb pnp, but at the same time, one
> of my
> > usb 
> > pendrive will get disconnected. Because that's my
> boot
> > drive 
> > ( I boot off from the usb drive ), that will cause
> problem
> > with 
> > my system.
> > 
> > Anyone has experienced this before ?
> > 
> >

No one is working on this ? Is there a similar device which
I can use as a reference ? I am thinking maybe I need to
modify the usb storage driver to ignore this device much
like this thread ? 

http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg54175.html

Regards.