* [GIT PULL FOR 6.18] Please pull platform-qcom-iris-encoder-plus-dependent-fixes-for-6.18-v2
@ 2025-09-09 9:42 bod
2025-09-09 12:07 ` Hans Verkuil
0 siblings, 1 reply; 2+ messages in thread
From: bod @ 2025-09-09 9:42 UTC (permalink / raw)
To: bod, linux-media, hans; +Cc: bryan.odonoghue
From: Bryan O'Donoghue <bod@kernel.org>
The following changes since commit dcd2ca10faaf59fedcafffc6bbf41ba628a23cc4:
media: i2c: s5k6a3: Use V4L2 legacy sensor clock helper (2025-09-08 20:32:43 +0200)
are available in the Git repository at:
https://gitlab.freedesktop.org/linux-media/users/bodonoghue.git tags/platform-qcom-iris-encoder-plus-dependent-fixes-for-6.18-v2
for you to fetch changes up to 105d6bc8583498dee6b8c665143a8d8eef135610:
media: iris: add VPU33 specific encoding buffer calculation (2025-09-09 09:59:37 +0100)
----------------------------------------------------------------
This tag contains:
- A number of Fixes:
- An set of patches to enable the encoder which depend
on the Fixes: in this PR to apply cleanly
- A power-sequencing update from Neil which also depends
on code in this tag
- v2 missed inclusion of "Fix buffer count reporting.."
from Dikshita - fixed in v2.
platform-qcom-iris-generic-fixes-updates-for-6.18-v2 should be
merged first.
----------------------------------------------------------------
Dikshita Agarwal (26):
media: iris: Fix buffer count reporting in internal buffer check
media: iris: Report unreleased PERSIST buffers on session close
media: iris: Fix memory leak by freeing untracked persist buffer
media: iris: Fix port streaming handling
media: iris: Allow substate transition to load resources during output streaming
media: iris: Always destroy internal buffers on firmware release response
media: iris: Update vbuf flags before v4l2_m2m_buf_done
media: iris: Simplify session stop logic by relying on vb2 checks
media: iris: Allow stop on firmware only if start was issued.
media: iris: Send dummy buffer address for all codecs during drain
media: iris: Fix missing LAST flag handling during drain
media: iris: Fix format check for CAPTURE plane in try_fmt
media: iris: Add support for video encoder device
media: iris: Initialize and deinitialize encoder instance structure
media: iris: Add support for ENUM_FMT, S/G/TRY_FMT encoder
media: iris: Add support for ENUM_FRAMESIZES/FRAMEINTERVALS for encoder
media: iris: Add support for VIDIOC_QUERYCAP for encoder video device
media: iris: Add encoder support for V4L2 event subscription
media: iris: Add support for G/S_SELECTION for encoder video device
media: iris: Add support for G/S_PARM for encoder video device
media: iris: Add platform-specific capabilities for encoder video device
media: iris: Add V4L2 streaming support for encoder video device
media: iris: Set platform capabilities to firmware for encoder video device
media: iris: Allocate and queue internal buffers for encoder video device
media: iris: Add support for buffer management ioctls for encoder device
media: iris: Add support for drain sequence in encoder video device
Neil Armstrong (1):
media: iris: add VPU33 specific encoding buffer calculation
drivers/media/platform/qcom/iris/Makefile | 5 +-
drivers/media/platform/qcom/iris/iris_buffer.c | 222 ++++-
drivers/media/platform/qcom/iris/iris_buffer.h | 7 +-
drivers/media/platform/qcom/iris/iris_common.c | 232 ++++++
drivers/media/platform/qcom/iris/iris_common.h | 18 +
drivers/media/platform/qcom/iris/iris_core.h | 20 +-
drivers/media/platform/qcom/iris/iris_ctrls.c | 675 ++++++++++++++-
drivers/media/platform/qcom/iris/iris_ctrls.h | 15 +
drivers/media/platform/qcom/iris/iris_hfi_common.h | 2 +-
.../platform/qcom/iris/iris_hfi_gen1_command.c | 482 ++++++++---
.../platform/qcom/iris/iris_hfi_gen1_defines.h | 112 ++-
.../platform/qcom/iris/iris_hfi_gen1_response.c | 60 +-
.../platform/qcom/iris/iris_hfi_gen2_command.c | 359 +++++---
.../platform/qcom/iris/iris_hfi_gen2_defines.h | 44 +-
.../platform/qcom/iris/iris_hfi_gen2_response.c | 46 +-
drivers/media/platform/qcom/iris/iris_instance.h | 24 +
.../platform/qcom/iris/iris_platform_common.h | 76 +-
.../media/platform/qcom/iris/iris_platform_gen2.c | 526 +++++++++++-
.../platform/qcom/iris/iris_platform_qcs8300.h | 352 +++++++-
.../platform/qcom/iris/iris_platform_sm8250.c | 236 +++++-
drivers/media/platform/qcom/iris/iris_probe.c | 33 +-
drivers/media/platform/qcom/iris/iris_state.c | 9 +-
drivers/media/platform/qcom/iris/iris_state.h | 1 +
drivers/media/platform/qcom/iris/iris_utils.c | 36 +
drivers/media/platform/qcom/iris/iris_utils.h | 2 +
drivers/media/platform/qcom/iris/iris_vb2.c | 58 +-
drivers/media/platform/qcom/iris/iris_vdec.c | 251 +-----
drivers/media/platform/qcom/iris/iris_vdec.h | 13 +-
drivers/media/platform/qcom/iris/iris_venc.c | 579 +++++++++++++
drivers/media/platform/qcom/iris/iris_venc.h | 27 +
drivers/media/platform/qcom/iris/iris_vidc.c | 299 ++++++-
drivers/media/platform/qcom/iris/iris_vpu_buffer.c | 922 ++++++++++++++++++++-
drivers/media/platform/qcom/iris/iris_vpu_buffer.h | 24 +-
33 files changed, 5051 insertions(+), 716 deletions(-)
create mode 100644 drivers/media/platform/qcom/iris/iris_common.c
create mode 100644 drivers/media/platform/qcom/iris/iris_common.h
create mode 100644 drivers/media/platform/qcom/iris/iris_venc.c
create mode 100644 drivers/media/platform/qcom/iris/iris_venc.h
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL FOR 6.18] Please pull platform-qcom-iris-encoder-plus-dependent-fixes-for-6.18-v2
2025-09-09 9:42 [GIT PULL FOR 6.18] Please pull platform-qcom-iris-encoder-plus-dependent-fixes-for-6.18-v2 bod
@ 2025-09-09 12:07 ` Hans Verkuil
0 siblings, 0 replies; 2+ messages in thread
From: Hans Verkuil @ 2025-09-09 12:07 UTC (permalink / raw)
To: bod, linux-media; +Cc: bryan.odonoghue
On 09/09/2025 11:42, bod@kernel.org wrote:
> From: Bryan O'Donoghue <bod@kernel.org>
>
> The following changes since commit dcd2ca10faaf59fedcafffc6bbf41ba628a23cc4:
>
> media: i2c: s5k6a3: Use V4L2 legacy sensor clock helper (2025-09-08 20:32:43 +0200)
>
> are available in the Git repository at:
>
> https://gitlab.freedesktop.org/linux-media/users/bodonoghue.git tags/platform-qcom-iris-encoder-plus-dependent-fixes-for-6.18-v2
>
> for you to fetch changes up to 105d6bc8583498dee6b8c665143a8d8eef135610:
>
> media: iris: add VPU33 specific encoding buffer calculation (2025-09-09 09:59:37 +0100)
>
> ----------------------------------------------------------------
> This tag contains:
>
> - A number of Fixes:
> - An set of patches to enable the encoder which depend
> on the Fixes: in this PR to apply cleanly
> - A power-sequencing update from Neil which also depends
> on code in this tag
> - v2 missed inclusion of "Fix buffer count reporting.."
> from Dikshita - fixed in v2.
>
> platform-qcom-iris-generic-fixes-updates-for-6.18-v2 should be
> merged first.
This fails to compile since this patch is now merged:
https://patchwork.linuxtv.org/project/linux-media/patch/20250902-sm8750-iris-v3-3-564488b412d2@linaro.org/
"media: iris: Add platform-specific capabilities for encoder video device"
doesn't take support for SM8750 (added by that patch) into account.
I marked this PR as "Changes Requested".
Bryan, if the changes are trivial (I suspect that's likely to be the case),
then just adjust the patch and post a new PR.
Regards,
Hans
>
> ----------------------------------------------------------------
> Dikshita Agarwal (26):
> media: iris: Fix buffer count reporting in internal buffer check
> media: iris: Report unreleased PERSIST buffers on session close
> media: iris: Fix memory leak by freeing untracked persist buffer
> media: iris: Fix port streaming handling
> media: iris: Allow substate transition to load resources during output streaming
> media: iris: Always destroy internal buffers on firmware release response
> media: iris: Update vbuf flags before v4l2_m2m_buf_done
> media: iris: Simplify session stop logic by relying on vb2 checks
> media: iris: Allow stop on firmware only if start was issued.
> media: iris: Send dummy buffer address for all codecs during drain
> media: iris: Fix missing LAST flag handling during drain
> media: iris: Fix format check for CAPTURE plane in try_fmt
> media: iris: Add support for video encoder device
> media: iris: Initialize and deinitialize encoder instance structure
> media: iris: Add support for ENUM_FMT, S/G/TRY_FMT encoder
> media: iris: Add support for ENUM_FRAMESIZES/FRAMEINTERVALS for encoder
> media: iris: Add support for VIDIOC_QUERYCAP for encoder video device
> media: iris: Add encoder support for V4L2 event subscription
> media: iris: Add support for G/S_SELECTION for encoder video device
> media: iris: Add support for G/S_PARM for encoder video device
> media: iris: Add platform-specific capabilities for encoder video device
> media: iris: Add V4L2 streaming support for encoder video device
> media: iris: Set platform capabilities to firmware for encoder video device
> media: iris: Allocate and queue internal buffers for encoder video device
> media: iris: Add support for buffer management ioctls for encoder device
> media: iris: Add support for drain sequence in encoder video device
>
> Neil Armstrong (1):
> media: iris: add VPU33 specific encoding buffer calculation
>
> drivers/media/platform/qcom/iris/Makefile | 5 +-
> drivers/media/platform/qcom/iris/iris_buffer.c | 222 ++++-
> drivers/media/platform/qcom/iris/iris_buffer.h | 7 +-
> drivers/media/platform/qcom/iris/iris_common.c | 232 ++++++
> drivers/media/platform/qcom/iris/iris_common.h | 18 +
> drivers/media/platform/qcom/iris/iris_core.h | 20 +-
> drivers/media/platform/qcom/iris/iris_ctrls.c | 675 ++++++++++++++-
> drivers/media/platform/qcom/iris/iris_ctrls.h | 15 +
> drivers/media/platform/qcom/iris/iris_hfi_common.h | 2 +-
> .../platform/qcom/iris/iris_hfi_gen1_command.c | 482 ++++++++---
> .../platform/qcom/iris/iris_hfi_gen1_defines.h | 112 ++-
> .../platform/qcom/iris/iris_hfi_gen1_response.c | 60 +-
> .../platform/qcom/iris/iris_hfi_gen2_command.c | 359 +++++---
> .../platform/qcom/iris/iris_hfi_gen2_defines.h | 44 +-
> .../platform/qcom/iris/iris_hfi_gen2_response.c | 46 +-
> drivers/media/platform/qcom/iris/iris_instance.h | 24 +
> .../platform/qcom/iris/iris_platform_common.h | 76 +-
> .../media/platform/qcom/iris/iris_platform_gen2.c | 526 +++++++++++-
> .../platform/qcom/iris/iris_platform_qcs8300.h | 352 +++++++-
> .../platform/qcom/iris/iris_platform_sm8250.c | 236 +++++-
> drivers/media/platform/qcom/iris/iris_probe.c | 33 +-
> drivers/media/platform/qcom/iris/iris_state.c | 9 +-
> drivers/media/platform/qcom/iris/iris_state.h | 1 +
> drivers/media/platform/qcom/iris/iris_utils.c | 36 +
> drivers/media/platform/qcom/iris/iris_utils.h | 2 +
> drivers/media/platform/qcom/iris/iris_vb2.c | 58 +-
> drivers/media/platform/qcom/iris/iris_vdec.c | 251 +-----
> drivers/media/platform/qcom/iris/iris_vdec.h | 13 +-
> drivers/media/platform/qcom/iris/iris_venc.c | 579 +++++++++++++
> drivers/media/platform/qcom/iris/iris_venc.h | 27 +
> drivers/media/platform/qcom/iris/iris_vidc.c | 299 ++++++-
> drivers/media/platform/qcom/iris/iris_vpu_buffer.c | 922 ++++++++++++++++++++-
> drivers/media/platform/qcom/iris/iris_vpu_buffer.h | 24 +-
> 33 files changed, 5051 insertions(+), 716 deletions(-)
> create mode 100644 drivers/media/platform/qcom/iris/iris_common.c
> create mode 100644 drivers/media/platform/qcom/iris/iris_common.h
> create mode 100644 drivers/media/platform/qcom/iris/iris_venc.c
> create mode 100644 drivers/media/platform/qcom/iris/iris_venc.h
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-09-09 12:07 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-09-09 9:42 [GIT PULL FOR 6.18] Please pull platform-qcom-iris-encoder-plus-dependent-fixes-for-6.18-v2 bod
2025-09-09 12:07 ` Hans Verkuil
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox