From: Franklin Meng <fmeng2002@yahoo.com>
To: video4linux-list@redhat.com
Subject: Kworld 315U help?
Date: Sun, 4 Jan 2009 14:04:16 -0800 (PST) [thread overview]
Message-ID: <953661.22009.qm@web32704.mail.mud.yahoo.com> (raw)
I was wondering if someone can help me get the Kworld 315U supported under
linux? Information about the device is located here:
http://linuxtv.org/wiki/index.php/KWorld_ATSC_315U
I have spent some time modifying the driver though I haven't gotten anything working yet. If someone can give me some pointers or help it would be greatly appreciated. I think I have all the chips of interest detected but I don't know what to do now.
Here's an output of my kernel logs showing the device. Hopefully I'm on the right track.
[ 569.663960] Linux video capture interface: v2.00
[ 569.717312] em28xx: New device USB 2883 Device @ 480 Mbps (eb1a:a313, interface 0, class 0)
[ 569.719319] em28xx #0: Identified as KWorld ATSC 315U HDTV TV Box (card=62)
[ 569.719407] em28xx #0: chip ID is em2882/em2883
[ 569.846878] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 13 a3 d0 13 5a 03 6a 22 00 00
[ 569.846911] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 01 00 00 00 00 00 00 00 00 00
[ 569.846942] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 5b 1c 00 00
[ 569.846971] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 569.847000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 569.847028] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 569.847056] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
[ 569.847086] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 33 00 20 00 44 00
[ 569.847116] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
[ 569.847145] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 569.847173] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 569.847202] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 569.847230] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 569.847259] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 569.847288] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 569.847317] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 569.847348] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x98330201
[ 569.847353] em28xx #0: EEPROM info:
[ 569.847357] em28xx #0: AC97 audio (5 sample rates)
[ 569.847362] em28xx #0: 500mA max power
[ 569.847367] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000
[ 569.847373] em28xx #0:
[ 569.847376]
[ 569.847382] em28xx #0: The support for this board weren't valid yet.
[ 569.847387] em28xx #0: Please send a report of having this working
[ 569.847393] em28xx #0: not to V4L mailing list (and/or to other addresses)
[ 569.847396]
[ 569.882876] saa7115' 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)
[ 569.955345] tuner' 0-0043: chip found @ 0x86 (em28xx #0)
[ 569.979876] tda9887 0-0043: creating new instance
[ 569.979894] tda9887 0-0043: tda988[5/6/7] found
[ 569.980772] tda9887 0-0043: destroying instance
[ 569.980993] tda9887 0-0043: creating new instance
[ 569.980999] tda9887 0-0043: tda988[5/6/7] found
[ 569.983857] tuner' 0-0061: chip found @ 0xc2 (em28xx #0)
[ 570.018607] tuner-simple 0-0061: creating new instance
[ 570.018622] tuner-simple 0-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC))
[ 570.025349] em28xx #0: Config register raw data: 0xd0
[ 570.026360] em28xx #0: AC97 vendor ID = 0xffffffff
[ 570.026747] em28xx #0: AC97 features = 0x6a90
[ 570.026752] em28xx #0: Empia 202 AC97 audio processor detected
[ 570.060722] em28xx #0: v4l2 driver version 0.1.1
[ 570.093645] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 570.093729] usbcore: registered new interface driver em28xx
[ 570.093737] em28xx driver loaded
[ 570.126733] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 570.126743] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 570.128744] Em28xx: Initialized (Em28xx Audio Extension) extension
[ 570.303684] DVB: registering new adapter (em28xx #0)
[ 570.305475] DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
[ 570.307037] Successfully loaded em28xx-dvb
[ 570.307051] Em28xx: Initialized (Em28xx dvb Extension) extension
Thanks,
Franklin
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next reply other threads:[~2009-01-04 22:04 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-04 22:04 Franklin Meng [this message]
2009-01-04 22:26 ` Kworld 315U help? Douglas Schilling Landgraf
2009-01-04 22:36 ` Franklin Meng
2009-01-04 22:29 ` Franklin Meng
-- strict thread matches above, loose matches on Subject: below --
2009-10-21 5:35 Franklin Meng
2009-10-21 12:55 ` Devin Heitmueller
2009-10-21 15:06 ` Franklin Meng
2009-10-22 4:03 ` Franklin Meng
2009-10-22 4:16 ` Devin Heitmueller
2009-10-22 4:44 ` Franklin Meng
2009-10-22 4:46 Franklin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=953661.22009.qm@web32704.mail.mud.yahoo.com \
--to=fmeng2002@yahoo.com \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox