* Fwd: Strange USB transfer problems with Delock 61959
[not found] ` <CAMJoypbtUk-32LBjvaXbv1gtBf4idatBeyc5VYGGMeJ0FkVSmg@mail.gmail.com>
@ 2013-09-13 15:01 ` Matthias Gruenewald
0 siblings, 0 replies; 2+ messages in thread
From: Matthias Gruenewald @ 2013-09-13 15:01 UTC (permalink / raw)
To: linux-media
Hello again,
I solved the problem. It was a bad cable. On the USB 3.0 port, it was
bended such that it works. On all other ports, the SNR was too low.
Sorry for bothering you...
Bye
Matthias
---------- Weitergeleitete Nachricht ----------
Von: "Matthias Gruenewald" <matthias.gruenewald@gmail.com>
Datum: 10.09.2013 08:08
Betreff: Fwd: Strange USB transfer problems with Delock 61959
An: <linux-media@vger.kernel.org>
Cc:
> Hello linux media developers,
>
> I have recently bought a Delock 61959 DVB-C USB stick. It's working
> fine under Windows. All SD and HD channels can be found and watched
> fine. But under Linux, I get a really strange behaviour. If I connect
> the stick to a USB 3.0 port, it is somehow working. HD channels work
> fine, but some SD channels like "Pro Sieben" (Germany) have
> occasionally dropouts in the stream. It looks like a channel with poor
> signal strength, but VDR's signal strength indicator is 100%. Now if I
> connect the same stick to a USB 2.0 port, it get's even worse. All
> channels have dropouts, I can sometimes even not tune to a channel.
> The kernel log does not indicate any USB transfer problems. VDR
> sometimes complains that it can not tune to a channel. And there are
> some error messages on get_lock_status. Here is a log from an example
> session on a USB 2.0 port (I enabled core_debug in the em28xx driver):
>
> 2013-09-10T07:57:26.733489+02:00 server kernel: [ 3997.846473] drxk:
> frontend initialized.
> 2013-09-10T07:57:28.217491+02:00 server kernel: [ 3999.330104] em2874
> #0: MaxMedia UB425-TC/Delock 61959: only DVB-C supported by that
> driver version
> 2013-09-10T07:57:28.217517+02:00 server kernel: [ 3999.330111] DVB:
> registering new adapter (em2874 #0)
> 2013-09-10T07:57:28.217519+02:00 server kernel: [ 3999.330118] usb
> 2-1.4: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)...
> 2013-09-10T07:57:28.217521+02:00 server kernel: [ 3999.330533] em2874
> #0: Successfully loaded em28xx-dvb
> 2013-09-10T07:57:28.217522+02:00 server kernel: [ 3999.330536] Em28xx:
> Initialized (Em28xx dvb Extension) extension
> 2013-09-10T07:57:28.223490+02:00 server kernel: [ 3999.335953]
> Registered IR keymap rc-delock-61959
> 2013-09-10T07:57:28.223509+02:00 server kernel: [ 3999.336075] input:
> em28xx IR (em2874 #0) as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/rc/rc10/input29
> 2013-09-10T07:57:28.223511+02:00 server kernel: [ 3999.336168] rc10:
> em28xx IR (em2874 #0) as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/rc/rc10
> 2013-09-10T07:57:28.223513+02:00 server kernel: [ 3999.336571] Em28xx:
> Initialized (Em28xx Input Extension) extension
> 2013-09-10T07:57:50.483486+02:00 server kernel: [ 4021.597678] Em28xx:
> Removed (Em28xx dvb Extension) extension
> 2013-09-10T07:57:50.501696+02:00 server kernel: [ 4021.615023] Em28xx:
> Removed (Em28xx Input Extension) extension
> 2013-09-10T07:57:50.501716+02:00 server kernel: [ 4021.615383]
> usbcore: deregistering interface driver em28xx
> 2013-09-10T07:57:50.501719+02:00 server kernel: [ 4021.615400] em2874
> #0: disconnecting em2874 #0 video
> 2013-09-10T07:57:50.501721+02:00 server kernel: [ 4021.615403] em2874
> #0: V4L2 device video0 deregistered
> 2013-09-10T07:57:52.086487+02:00 server kernel: [ 4023.200624] em28xx:
> New device USB 2875 Device @ 480 Mbps (1b80:e1cc, interface 0, class
> 0)
> 2013-09-10T07:57:52.086510+02:00 server kernel: [ 4023.200629] em28xx:
> DVB interface 0 found: isoc
> 2013-09-10T07:57:52.086512+02:00 server kernel: [ 4023.200710] em28xx:
> chip ID is em2874
> 2013-09-10T07:57:52.347501+02:00 server kernel: [ 4023.461484] em2874
> #0: i2c eeprom 0000: 26 00 01 00 02 08 c8 e5 f5 64 01 60 09 e5 f5 64
> 2013-09-10T07:57:52.347525+02:00 server kernel: [ 4023.461494] em2874
> #0: i2c eeprom 0010: 09 60 03 c2 c6 22 e5 f7 b4 03 13 e5 f6 b4 87 03
> 2013-09-10T07:57:52.347527+02:00 server kernel: [ 4023.461500] em2874
> #0: i2c eeprom 0020: 02 08 63 e5 f6 b4 93 03 02 06 f7 c2 c6 22 c2 c6
> 2013-09-10T07:57:52.347528+02:00 server kernel: [ 4023.461506] em2874
> #0: i2c eeprom 0030: 22 00 60 00 90 00 60 12 06 29 7b 95 7a 67 79 eb
> 2013-09-10T07:57:52.347529+02:00 server kernel: [ 4023.461512] em2874
> #0: i2c eeprom 0040: 78 1a c3 12 06 18 70 03 d3 80 01 c3 92 02 90 78
> 2013-09-10T07:57:52.347530+02:00 server kernel: [ 4023.461518] em2874
> #0: i2c eeprom 0050: 0b 74 96 f0 74 82 f0 90 78 5d 74 05 f0 a3 f0 22
> 2013-09-10T07:57:52.347531+02:00 server kernel: [ 4023.461524] em2874
> #0: i2c eeprom 0060: 00 00 00 00 1a eb 67 95 80 1b cc e1 f0 93 6b 00
> 2013-09-10T07:57:52.347532+02:00 server kernel: [ 4023.461529] em2874
> #0: i2c eeprom 0070: 6a 20 00 00 00 00 04 57 4e 07 09 00 00 00 00 00
> 2013-09-10T07:57:52.347533+02:00 server kernel: [ 4023.461535] em2874
> #0: i2c eeprom 0080: 00 00 00 00 4e 00 12 00 f0 10 44 89 88 00 00 00
> 2013-09-10T07:57:52.347534+02:00 server kernel: [ 4023.461541] em2874
> #0: i2c eeprom 0090: 5b 81 c0 00 00 00 20 40 20 80 02 20 01 01 00 00
> 2013-09-10T07:57:52.347535+02:00 server kernel: [ 4023.461547] em2874
> #0: i2c eeprom 00a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 2013-09-10T07:57:52.347536+02:00 server kernel: [ 4023.461553] em2874
> #0: i2c eeprom 00b0: c6 40 00 00 00 00 87 00 00 00 00 00 00 40 00 00
> 2013-09-10T07:57:52.347537+02:00 server kernel: [ 4023.461558] em2874
> #0: i2c eeprom 00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 03
> 2013-09-10T07:57:52.347538+02:00 server kernel: [ 4023.461564] em2874
> #0: i2c eeprom 00d0: 55 00 53 00 42 00 20 00 32 00 38 00 37 00 35 00
> 2013-09-10T07:57:52.347539+02:00 server kernel: [ 4023.461570] em2874
> #0: i2c eeprom 00e0: 20 00 44 00 65 00 76 00 69 00 63 00 65 00 04 03
> 2013-09-10T07:57:52.347540+02:00 server kernel: [ 4023.461576] em2874
> #0: i2c eeprom 00f0: 31 00 00 00 33 00 34 00 35 00 36 00 37 00 38 00
> 2013-09-10T07:57:52.347541+02:00 server kernel: [ 4023.461582] em2874
> #0: i2c eeprom 0100: ... (skipped)
> 2013-09-10T07:57:52.347543+02:00 server kernel: [ 4023.461585] em2874
> #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xde1f879b
> 2013-09-10T07:57:52.347544+02:00 server kernel: [ 4023.461586] em2874
> #0: EEPROM info:
> 2013-09-10T07:57:52.347544+02:00 server kernel: [ 4023.461588] em2874
> #0: microcode start address = 0x0004, boot configuration = 0x01
> 2013-09-10T07:57:52.355517+02:00 server kernel: [ 4023.468985] em2874
> #0: I2S audio, 3 sample rates
> 2013-09-10T07:57:52.355537+02:00 server kernel: [ 4023.468991] em2874
> #0: 500mA max power
> 2013-09-10T07:57:52.355539+02:00 server kernel: [ 4023.468993] em2874
> #0: Table at offset 0x04, strings=0x206a, 0x0000, 0x0000
> 2013-09-10T07:57:52.355540+02:00 server kernel: [ 4023.469086] em2874
> #0: Identified as Delock 61959 (card=89)
> 2013-09-10T07:57:52.355542+02:00 server kernel: [ 4023.469092] em2874
> #0: v4l2 driver version 0.2.0
> 2013-09-10T07:57:52.355543+02:00 server kernel: [ 4023.469458] em2874
> #0 em28xx_accumulator_set :em28xx Scale: (1,1)-(179,143)
> 2013-09-10T07:57:52.356504+02:00 server kernel: [ 4023.470219] em2874
> #0 em28xx_capture_area_set :capture area set to (0,0): 720x576
> 2013-09-10T07:57:52.360662+02:00 server kernel: [ 4023.474580] em2874
> #0: V4L2 video device registered as video0
> 2013-09-10T07:57:52.360682+02:00 server kernel: [ 4023.474585] em2874
> #0: dvb set to isoc mode.
> 2013-09-10T07:57:52.360684+02:00 server kernel: [ 4023.474588] em2874
> #0 em28xx_alloc_urbs :em28xx: called em28xx_alloc_isoc in mode 2
> 2013-09-10T07:57:52.360686+02:00 server kernel: [ 4023.474590] em2874
> #0 em28xx_uninit_usb_xfer :em28xx: called em28xx_uninit_usb_xfer in
> mode 2
> 2013-09-10T07:57:52.360687+02:00 server kernel: [ 4023.474955]
> usbcore: registered new interface driver em28xx
> 2013-09-10T07:57:52.364484+02:00 server kernel: [ 4023.478081] em2874
> #0 em28xx_accumulator_set :em28xx Scale: (1,1)-(179,143)
> 2013-09-10T07:57:52.364511+02:00 server kernel: [ 4023.478607] em2874
> #0 em28xx_capture_area_set :capture area set to (0,0): 720x576
> 2013-09-10T07:57:52.376514+02:00 server kernel: [ 4023.490330] drxk:
> status = 0x639130d9
> 2013-09-10T07:57:52.376535+02:00 server kernel: [ 4023.490337] drxk:
> detected a drx-3913k, spin A3, xtal 20.250 MHz
> 2013-09-10T07:57:52.433516+02:00 server kernel: [ 4023.547233] drxk:
> DRXK driver version 0.9.4300
> 2013-09-10T07:57:52.447513+02:00 server kernel: [ 4023.561729] drxk:
> frontend initialized.
> 2013-09-10T07:57:53.928765+02:00 server kernel: [ 4025.042553] em2874
> #0: MaxMedia UB425-TC/Delock 61959: only DVB-C supported by that
> driver version
> 2013-09-10T07:57:53.928790+02:00 server kernel: [ 4025.042561] DVB:
> registering new adapter (em2874 #0)
> 2013-09-10T07:57:53.928792+02:00 server kernel: [ 4025.042570] usb
> 2-1.4: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)...
> 2013-09-10T07:57:53.928793+02:00 server kernel: [ 4025.042981] em2874
> #0: Successfully loaded em28xx-dvb
> 2013-09-10T07:57:53.928794+02:00 server kernel: [ 4025.043002] Em28xx:
> Initialized (Em28xx dvb Extension) extension
> 2013-09-10T07:57:53.938570+02:00 server kernel: [ 4025.052930]
> Registered IR keymap rc-delock-61959
> 2013-09-10T07:57:53.938591+02:00 server kernel: [ 4025.053054] input:
> em28xx IR (em2874 #0) as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/rc/rc11/input30
> 2013-09-10T07:57:53.939591+02:00 server kernel: [ 4025.053466] rc11:
> em28xx IR (em2874 #0) as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/rc/rc11
> 2013-09-10T07:57:53.939605+02:00 server kernel: [ 4025.053927] Em28xx:
> Initialized (Em28xx Input Extension) extension
> 2013-09-10T07:57:56.779569+02:00 server vdr: [21283] VDR version 2.0.3 started
> 2013-09-10T07:57:56.780138+02:00 server vdr: [21283] codeset is 'UTF-8' - known
> 2013-09-10T07:57:56.780578+02:00 server vdr: [21283] found 28 locales
> in /usr/local/share/locale
> 2013-09-10T07:57:56.781507+02:00 server vdr: [21283] loading plugin:
> /usr/local/lib64/vdr/libvdr-xineliboutput.so.2.0.0
> 2013-09-10T07:57:56.782151+02:00 server vdr: [21283] loading /etc/vdr/setup.conf
> 2013-09-10T07:57:56.782626+02:00 server vdr: [21283] loading
> /etc/vdr/sources.conf
> 2013-09-10T07:57:56.783130+02:00 server vdr: [21283] loading
> /etc/vdr/diseqc.conf
> 2013-09-10T07:57:56.783693+02:00 server vdr: [21283] loading
> /etc/vdr/channels.conf
> 2013-09-10T07:57:56.786436+02:00 server vdr: [21283] loading
> /etc/vdr/commands.conf
> 2013-09-10T07:57:56.787186+02:00 server vdr: [21283] loading
> /etc/vdr/svdrphosts.conf
> 2013-09-10T07:57:56.787702+02:00 server vdr: [21283] loading
> /etc/vdr/remote.conf
> 2013-09-10T07:57:56.788257+02:00 server vdr: [21283] loading
> /etc/vdr/keymacros.conf
> 2013-09-10T07:57:56.788816+02:00 server vdr: [21283] ERROR: unknown
> plugin 'yaepghd'
> 2013-09-10T07:57:56.789412+02:00 server vdr: [21283] ERROR: empty key macro
> 2013-09-10T07:57:56.800490+02:00 server vdr: [21284] video directory
> scanner thread started (pid=21283, tid=21284, prio=high)
> 2013-09-10T07:57:56.802015+02:00 server vdr: [21283] registered source
> parameters for 'A - ATSC'
> 2013-09-10T07:57:56.802536+02:00 server vdr: [21283] registered source
> parameters for 'C - DVB-C'
> 2013-09-10T07:57:56.803021+02:00 server vdr: [21283] registered source
> parameters for 'S - DVB-S'
> 2013-09-10T07:57:56.803511+02:00 server vdr: [21284] video directory
> scanner thread ended (pid=21283, tid=21284)
> 2013-09-10T07:57:56.804039+02:00 server vdr: [21283] registered source
> parameters for 'T - DVB-T'
> 2013-09-10T07:57:56.804529+02:00 server vdr: [21283] probing
> /dev/dvb/adapter0/frontend0
> 2013-09-10T07:57:56.805012+02:00 server vdr: [21283] creating cDvbDevice
> 2013-09-10T07:57:56.805500+02:00 server vdr: [21283] new device number 1
> 2013-09-10T07:57:56.806001+02:00 server vdr: [21286] epg data reader
> thread started (pid=21283, tid=21286, prio=high)
> 2013-09-10T07:57:56.806649+02:00 server vdr: [21286] reading EPG data
> from /var/cache/vdr/epg.data
> 2013-09-10T07:57:56.808253+02:00 server vdr: [21283] DVB API version
> is 0x050A (VDR was built with 0x0509)
> 2013-09-10T07:57:56.808958+02:00 server vdr: [21283] frontend 0/0
> provides DVB-C,(null),DVB-T with QAM16,QAM32,QAM64,QAM128,QAM256
> ("DRXK DVB-C DVB-T")
> 2013-09-10T07:57:56.809509+02:00 server vdr: [21283] found 1 DVB device
> 2013-09-10T07:57:56.810030+02:00 server vdr: [21283] initializing
> plugin: xineliboutput (2.0.0-cvs): X11/xine-lib Ausgabe-Plugin
> 2013-09-10T07:57:56.810611+02:00 server vdr: [21283] new device number 9
> 2013-09-10T07:57:56.811185+02:00 server vdr: [21283] [xine..put]
> cTimePts: clock_gettime(CLOCK_MONOTONIC): clock resolution 0 us
> 2013-09-10T07:57:56.811722+02:00 server vdr: [21283] [xine..put]
> cTimePts: using monotonic clock
> 2013-09-10T07:57:56.812289+02:00 server vdr: [21283] [xine..put] RTP
> SSRC: 0x1011efa6
> 2013-09-10T07:57:56.812793+02:00 server vdr: [21285] video directory
> scanner thread started (pid=21283, tid=21285, prio=high)
> 2013-09-10T07:57:56.813328+02:00 server vdr: [21285] video directory
> scanner thread ended (pid=21283, tid=21285)
> 2013-09-10T07:57:56.814538+02:00 server vdr: [21283] setting primary device to 2
> 2013-09-10T07:57:56.814556+02:00 server vdr: [21289] section handler
> thread started (pid=21283, tid=21289, prio=low)
> 2013-09-10T07:57:56.817685+02:00 server vdr: [21283] assuming manual
> start of VDR
> 2013-09-10T07:57:56.817711+02:00 server vdr: [21283] SVDRP listening
> on port 2001
> 2013-09-10T07:57:56.817716+02:00 server vdr: [21283] setting current
> skin to "lcars"
> 2013-09-10T07:57:56.817719+02:00 server vdr: [21283] loading
> /etc/vdr/themes/lcars-default.theme
> 2013-09-10T07:57:56.817721+02:00 server vdr: [21288] tuner on frontend
> 0/0 thread started (pid=21283, tid=21288, prio=high)
> 2013-09-10T07:57:56.817724+02:00 server vdr: [21283] starting plugin:
> xineliboutput
> 2013-09-10T07:57:56.817726+02:00 server vdr: [21290] [xine..put] Have
> CAP_SYS_NICE capability
> 2013-09-10T07:57:56.818359+02:00 server vdr: [21288] cTimeMs: using
> monotonic clock (resolution is 1 ns)
> 2013-09-10T07:57:56.819803+02:00 server vdr: [21291] Remote
> decoder/display server (cXinelibServer) thread started (pid=21283,
> tid=21291, prio=high)
> 2013-09-10T07:57:56.820427+02:00 server vdr: [21291] [xine..put] Have
> CAP_SYS_NICE capability
> 2013-09-10T07:57:56.821002+02:00 server vdr: [21291] [xine..put]
> cXinelibServer priority set successful SCHED_RR 2 [1,99]
> 2013-09-10T07:57:56.821500+02:00 server vdr: [21291] [xine..put]
> Listening on port 37890
> 2013-09-10T07:57:56.822189+02:00 server vdr: [21291] [xine..put]
> Listening for UDP broadcasts on port 37890
> 2013-09-10T07:57:56.822698+02:00 server vdr: [21286] epg data reader
> thread ended (pid=21283, tid=21286)
> 2013-09-10T07:57:56.824500+02:00 server kernel: [ 4027.938209] drxk:
> Error -22 on get_lock_status
> 2013-09-10T07:57:56.913390+02:00 server vdr: [21283] [xine..put]
> cXinelibDevice::StartDevice(): Device started
> 2013-09-10T07:57:56.913876+02:00 server vdr: [21283] remote control
> KBD - keys known
> 2013-09-10T07:57:56.914239+02:00 server vdr: [21292] KBD remote
> control thread started (pid=21283, tid=21292, prio=high)
> 2013-09-10T07:57:56.914706+02:00 server kernel: [ 4028.028450] em2874
> #0 em28xx_init_usb_xfer :em28xx: called em28xx_init_usb_xfer in mode 2
> 2013-09-10T07:57:56.914727+02:00 server vdr: [21283] switching to channel 18
> 2013-09-10T07:57:56.915107+02:00 server vdr: [21293] receiver on
> device 1 thread started (pid=21283, tid=21293, prio=high)
> 2013-09-10T07:57:56.915511+02:00 server vdr: [21294] TS buffer on
> device 1 thread started (pid=21283, tid=21294, prio=high)
> 2013-09-10T07:57:56.924496+02:00 server kernel: [ 4028.038438] drxk:
> Error -22 on get_lock_status
> 2013-09-10T07:57:56.931058+02:00 server vdr: [21283] OSD size changed
> to 720x576 @ 1,42222
> 2013-09-10T07:57:56.944282+02:00 server vdr: [21283] [xine..put]
> cXinelibOsd::CanHandleAreas(): Device does not support ARGB
> 2013-09-10T07:57:57.109489+02:00 server kernel: [ 4028.223758] drxk:
> SCU_RESULT_INVPAR while sending cmd 0x0203 with params:
> 2013-09-10T07:57:57.109512+02:00 server kernel: [ 4028.223764] drxk:
> Warning -22 on qam_demodulator_command
> 2013-09-10T07:57:57.716014+02:00 server vdr: [21293] [xine..put]
> Detected video size 720x576
> 2013-09-10T07:57:58.302362+02:00 server vdr: [21289] creating new
> channel 'Detskij Mir,;Unitymedia' on C transponder 402 with id
> 9999-221-22102-0
> 2013-09-10T07:57:58.302937+02:00 server vdr: [21289] changing name of
> channel 12 from 'Channel One Russia ,;Unitymedia' to 'Channel One
> Russia,;Unitymedia'
> 2013-09-10T07:58:00.190179+02:00 server vdr: [21289] changing
> transponder data of channel 3 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.190790+02:00 server vdr: [21289] changing
> transponder data of channel 4 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.191954+02:00 server vdr: [21289] changing
> transponder data of channel 5 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.191971+02:00 server vdr: [21289] changing
> transponder data of channel 6 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.192105+02:00 server vdr: [21289] changing
> transponder data of channel 7 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.192503+02:00 server vdr: [21289] changing
> transponder data of channel 8 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.192942+02:00 server vdr: [21289] changing
> transponder data of channel 9 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.193313+02:00 server vdr: [21289] changing
> transponder data of channel 10 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.193696+02:00 server vdr: [21289] changing
> transponder data of channel 11 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.194081+02:00 server vdr: [21289] changing
> transponder data of channel 12 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.194651+02:00 server vdr: [21289] changing
> transponder data of channel 13 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.195041+02:00 server vdr: [21289] changing
> transponder data of channel 14 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.195472+02:00 server vdr: [21289] changing
> transponder data of channel 15 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.195864+02:00 server vdr: [21289] changing
> transponder data of channel 16 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.196228+02:00 server vdr: [21289] changing
> transponder data of channel 17 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.196631+02:00 server vdr: [21289] changing
> transponder data of channel 18 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.197054+02:00 server vdr: [21289] changing
> transponder data of channel 19 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.197543+02:00 server vdr: [21289] changing
> transponder data of channel 20 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.198032+02:00 server vdr: [21289] changing
> transponder data of channel 21 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.198434+02:00 server vdr: [21289] changing
> transponder data of channel 22 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.198833+02:00 server vdr: [21289] changing
> transponder data of channel 23 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.199273+02:00 server vdr: [21289] changing
> transponder data of channel 24 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.199838+02:00 server vdr: [21289] changing
> transponder data of channel 363 from 402000:M256:C:6900 to
> 402000:C0M256:C:6900
> 2013-09-10T07:58:00.200302+02:00 server vdr: [21283] retuning due to
> modification of channel 18
> 2013-09-10T07:58:00.200770+02:00 server vdr: [21283] switching to channel 18
> 2013-09-10T07:58:00.238141+02:00 server vdr: [21294] TS buffer on
> device 1 thread ended (pid=21283, tid=21294)
> 2013-09-10T07:58:00.240854+02:00 server vdr: [21293] buffer stats:
> 62416 (1%) used
> 2013-09-10T07:58:00.241471+02:00 server vdr: [21293] receiver on
> device 1 thread ended (pid=21283, tid=21293)
> 2013-09-10T07:58:00.257804+02:00 server vdr: [21358] receiver on
> device 1 thread started (pid=21283, tid=21358, prio=high)
> 2013-09-10T07:58:00.258369+02:00 server vdr: [21359] TS buffer on
> device 1 thread started (pid=21283, tid=21359, prio=high)
> 2013-09-10T07:58:00.558682+02:00 server vdr: [21358] [xine..put]
> Detected video size 720x576
> 2013-09-10T07:58:01.782168+02:00 server vdr: [21289] changing pids of
> channel 363 from 0+0=0:0:0:0 to 523+523=2:524=rus@4:0:0
> 2013-09-10T07:58:01.782791+02:00 server vdr: [21289] changing caids of
> channel 363 from 0 to 1831,1722,1850,1838,1835
> 2013-09-10T07:58:04.413919+02:00 server vdr: [21289] changing pids of
> channel 7 from 573+573=2:574=ita@4:0:575 to
> 573+573=2:574=ita@4,696=eng@4:0:575
> 2013-09-10T07:58:06.813754+02:00 server vdr: [21289] changing pids of
> channel 12 from 623+623=2:624=@4:0:0 to 623+623=2:624=@3:0:0
> 2013-09-10T07:58:07.317887+02:00 server vdr: [21289] changing pids of
> channel 13 from
> 633+633=2:634=spa@3,2241=ukr@4,2242=gre@4,2243=hun@4:0:635 to
> 633+633=2:634=esl@3,2241=ukr@3,2242=ell@3,2243=hun@3:0:635
> 2013-09-10T07:58:07.789712+02:00 server vdr: [21289] changing pids of
> channel 14 from
> 633+633=2:644=fra@3,2241=ukr@4,2242=gre@4,2243=hun@4:0:635 to
> 633+633=2:644=fra@3,2241=ukr@3,2242=ell@3,2243=hun@3:0:635
> 2013-09-10T07:58:08.270818+02:00 server vdr: [21289] changing pids of
> channel 15 from
> 633+633=2:654=eng@3,2241=ukr@4,2242=gre@4,2243=hun@4:0:635 to
> 633+633=2:654=eng@3,2241=ukr@3,2242=ell@3,2243=hun@3:0:635
> 2013-09-10T07:58:08.741670+02:00 server vdr: [21289] changing pids of
> channel 16 from
> 633+633=2:664=ita@3,2241=ukr@4,2242=gre@4,2243=hun@4:0:635 to
> 633+633=2:664=ita@3,2241=ukr@3,2242=ell@3,2243=hun@3:0:635
> 2013-09-10T07:58:09.135830+02:00 server vdr: [21291] [xine..put]
> Client 0 connected: 127.0.0.1:46271
> 2013-09-10T07:58:09.135856+02:00 server vdr: [21291] loading
> /etc/vdr/plugins/xineliboutput/allowed_hosts.conf
> 2013-09-10T07:58:09.136519+02:00 server vdr: [21291] [xine..put]
> cxSocket: setsockopt(SO_SNDBUF): got 262144 bytes
> 2013-09-10T07:58:09.136758+02:00 server vdr: [21291] [xine..put]
> Trying PIPE connection ...
> 2013-09-10T07:58:09.137106+02:00 server vdr: [21291] creating
> directory /etc/vdr/plugins/xineliboutput/pipes.21283
> 2013-09-10T07:58:09.137485+02:00 server vdr: [21291] removing
> /etc/vdr/plugins/xineliboutput/pipes.21283
> 2013-09-10T07:58:09.137854+02:00 server vdr: [21291] [xine..put]
> cBackgroundWriterI initialized (buffer 2048 kb)
> 2013-09-10T07:58:09.138209+02:00 server vdr: [21291] [xine..put]
> cTcpWriter initialized (buffer 2048 kb)
> 2013-09-10T07:58:09.138630+02:00 server vdr: [21291] [xine..put] Pipe open
> 2013-09-10T07:58:09.213729+02:00 server vdr: [21289] changing pids of
> channel 17 from
> 633+633=2:674=por@3,2241=ukr@4,2242=gre@4,2243=hun@4:0:635 to
> 633+633=2:674=por@3,2241=ukr@3,2242=ell@3,2243=hun@3:0:635
> 2013-09-10T07:58:09.717561+02:00 server vdr: [21289] changing pids of
> channel 18 from
> 633+633=2:684=rus@3,2241=ukr@4,2242=gre@4,2243=hun@4:0:635 to
> 633+633=2:684=rus@3,2241=ukr@3,2242=ell@3,2243=hun@3:0:635
> 2013-09-10T07:58:10.189534+02:00 server vdr: [21289] changing pids of
> channel 19 from
> 633+633=2:694=deu@3,2241=ukr@4,2242=gre@4,2243=hun@4:0:635 to
> 633+633=2:694=deu@3,2241=ukr@3,2242=ell@3,2243=hun@3:0:635
> 2013-09-10T07:58:10.209285+02:00 server vdr: [21283] OSD size changed
> to 1920x1080 @ 1
> 2013-09-10T07:58:10.209871+02:00 server vdr: [21283] retuning due to
> modification of channel 18
> 2013-09-10T07:58:10.210145+02:00 server vdr: [21283] switching to channel 18
> 2013-09-10T07:58:10.277877+02:00 server vdr: [21359] TS buffer on
> device 1 thread ended (pid=21283, tid=21359)
> 2013-09-10T07:58:10.286061+02:00 server vdr: [21358] buffer stats:
> 66928 (1%) used
> 2013-09-10T07:58:10.286589+02:00 server vdr: [21358] receiver on
> device 1 thread ended (pid=21283, tid=21358)
> 2013-09-10T07:58:10.300499+02:00 server vdr: [21552] receiver on
> device 1 thread started (pid=21283, tid=21552, prio=high)
> 2013-09-10T07:58:10.300927+02:00 server vdr: [21553] TS buffer on
> device 1 thread started (pid=21283, tid=21553, prio=high)
> 2013-09-10T07:58:11.302360+02:00 server vdr: [21552] [xine..put]
> Detected video size 720x576
> 2013-09-10T07:58:19.574051+02:00 server vdr: [21283] [xine..put] OSD
> bandwidth: 1238109 bytes/s (9672 kbit/s)
> 2013-09-10T07:58:19.692889+02:00 server vdr: [21289] changing pids of
> channel 21 from 723+723=2:724=rus@4:0:0 to 0+0=0:0:0:0
> 2013-09-10T07:58:19.693437+02:00 server vdr: [21289] changing caids of
> channel 21 from 1831,1722,1850,1838,1835 to 1831,1722,1838,1835
> 2013-09-10T07:58:20.172853+02:00 server vdr: [21289] changing pids of
> channel 22 from
> 633+633=2:734=ara@3,2241=ukr@4,2242=gre@4,2243=hun@4:0:635 to
> 633+633=2:734=ara@3,2241=ukr@3,2242=ell@3,2243=hun@3:0:635
> 2013-09-10T07:58:20.583236+02:00 server vdr: [21283] [xine..put] OSD
> bandwidth: 2260186 bytes/s (17657 kbit/s)
> 2013-09-10T07:58:20.583340+02:00 server vdr: [21283] switching to channel 1
> 2013-09-10T07:58:20.680981+02:00 server vdr: [21553] TS buffer on
> device 1 thread ended (pid=21283, tid=21553)
> 2013-09-10T07:58:20.681926+02:00 server vdr: [21552] buffer stats:
> 82720 (1%) used
> 2013-09-10T07:58:20.682340+02:00 server vdr: [21552] receiver on
> device 1 thread ended (pid=21283, tid=21552)
> 2013-09-10T07:58:20.703846+02:00 server vdr: [21707] receiver on
> device 1 thread started (pid=21283, tid=21707, prio=high)
> 2013-09-10T07:58:20.704294+02:00 server vdr: [21708] TS buffer on
> device 1 thread started (pid=21283, tid=21708, prio=high)
> 2013-09-10T07:58:21.031182+02:00 server vdr: [21288] frontend 0/0 lost
> lock on channel 1, tp 610
> 2013-09-10T07:58:21.053516+02:00 server vdr: [21288] frontend 0/0
> regained lock on channel 1, tp 610
> 2013-09-10T07:58:21.305275+02:00 server vdr: [21707] [xine..put]
> Detected video size 720x576
> 2013-09-10T07:58:22.039544+02:00 server vdr: [21283] [xine..put] OSD
> bandwidth: 2403888 bytes/s (18780 kbit/s)
> 2013-09-10T07:58:28.320468+02:00 server vdr: [21288] frontend 0/0 lost
> lock on channel 1, tp 610
> 2013-09-10T07:58:28.342324+02:00 server vdr: [21288] frontend 0/0
> regained lock on channel 1, tp 610
> 2013-09-10T07:58:34.024685+02:00 server vdr: [21291] [xine..put]
> Closing connection 0
> 2013-09-10T07:58:40.547154+02:00 server vdr: [21283] stopping plugin:
> xineliboutput
> 2013-09-10T07:58:40.547833+02:00 server vdr: [21283] [xine..put]
> cXinelibDevice::StopDevice(): Stopping device ...
> 2013-09-10T07:58:40.639949+02:00 server vdr: [21708] TS buffer on
> device 1 thread ended (pid=21283, tid=21708)
> 2013-09-10T07:58:40.647509+02:00 server vdr: [21707] buffer stats:
> 119568 (2%) used
> 2013-09-10T07:58:40.647795+02:00 server vdr: [21707] receiver on
> device 1 thread ended (pid=21283, tid=21707)
> 2013-09-10T07:58:41.025023+02:00 server vdr: [21291] Remote
> decoder/display server (cXinelibServer) thread ended (pid=21283,
> tid=21291)
> 2013-09-10T07:58:41.041742+02:00 server vdr: [21283] [xine..put]
> cXinelibOsdProvider: shutting down !
> 2013-09-10T07:58:41.042382+02:00 server vdr: [21292] KBD remote
> control thread ended (pid=21283, tid=21292)
> 2013-09-10T07:58:41.096512+02:00 server vdr: [21283] saved setup to
> /etc/vdr/setup.conf
> 2013-09-10T07:58:41.123524+02:00 server kernel: [ 4072.240289] em2874
> #0 em28xx_stop_urbs :em28xx: called em28xx_stop_urbs
> 2013-09-10T07:58:41.195632+02:00 server vdr: [21289] section handler
> thread ended (pid=21283, tid=21289)
> 2013-09-10T07:58:41.197859+02:00 server vdr: [21288] tuner on frontend
> 0/0 thread ended (pid=21283, tid=21288)
> 2013-09-10T07:58:41.208594+02:00 server vdr: [21283] [xine..put]
> cXinelibDevice::StopDevice(): Stopping device ...
> 2013-09-10T07:58:41.209196+02:00 server vdr: [21283] deleting plugin:
> xineliboutput
> 2013-09-10T07:58:41.287411+02:00 server vdr: [21283] caught signal 2
> 2013-09-10T07:58:41.287928+02:00 server vdr: [21283] exiting, exit code 0
>
> Do you have any idea what's going wrong? Kernel version is 3.11.0. I'm
> somehow experienced with kernel module development, so if there is
> anything that I can debug, please let me know. Thanks!
>
> Bye
>
> Matthias
^ permalink raw reply [flat|nested] 2+ messages in thread