Re: [PATCH 11/13] media: i2c: os05b10: Update active format before adjusting framing controls

[Tarang Raval <tarang.raval@siliconsignals.io>]

Hi Sakari,

> On Tue, Mar 24, 2026 at 04:31:02PM +0000, Tarang Raval wrote:
> >
> > Hi Sakari,
> >
> > > os05b10_set_pad_format() calls os05b10_set_framing_limits() before updating
> > > the ACTIVE format. As a result, the VBLANK control handler uses the old
> > > height when recalculating exposure limits, causing -ERANGE when switching
> > > to a larger resolution.
> > >
> > > Update the ACTIVE format before adjusting framing controls so control
> > > callbacks use the correct dimensions.
> > >
> > > Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
> > > ---
> > >  drivers/media/i2c/os05b10.c | 4 ++--
> > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/media/i2c/os05b10.c b/drivers/media/i2c/os05b10.c
> > > index 4601e33b7e8f..476dbcb49351 100644
> > > --- a/drivers/media/i2c/os05b10.c
> > > +++ b/drivers/media/i2c/os05b10.c
> > > @@ -902,14 +902,14 @@ static int os05b10_set_pad_format(struct v4l2_subdev *sd,
> > >
> > >          format = v4l2_subdev_state_get_format(sd_state, 0);
> > >
> > > +       *format = fmt->format;
> > > +
> >
> > This is the final analysis without this patch.
> >
> > Please check the logs in the attached file.
> >
> > When switching the resolution from 1280x720 to 2592x1944, the logs show that
> > while configuring the 1280 mode from the 2592 mode, the maximum exposure value
> > is calculated as 2219 (fmt->height + ctrl->val - exposure margin).
> >
> > However, after switching to the 2592 mode, the maximum exposure value is 774.
> >
> > From both cases, it is evident that fmt->height is being calculated incorrectly
> > It is still using the previous height instead of updating to the new resolution.
> >
> > Please share your thoughts. Am I heading in the right direction?
>
> I think the patch is reasonable. It'd be still nice to get reviews from
> others before merging this.

Yes, I will send a V2 of this series shortly. You can review that version.

Best Regards,
Tarang