From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.gmx.net ([213.165.64.20]:60680 "HELO mail.gmx.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1751046AbZKIUjG convert rfc822-to-8bit (ORCPT ); Mon, 9 Nov 2009 15:39:06 -0500 Date: Mon, 9 Nov 2009 21:39:08 +0100 (CET) From: Guennadi Liakhovetski To: Ian Molton cc: Linux Media Mailing List Subject: Re: [PATCH/RFC] tmio_mmc: keep card-detect interrupts enabled In-Reply-To: Message-ID: References: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=ISO-8859-1 Content-Transfer-Encoding: 8BIT Sender: linux-media-owner@vger.kernel.org List-ID: (re-adding accidentally dropped ML) On Mon, 9 Nov 2009, Ian Molton wrote: > Well, I presume we want to know when the card gets removed :) Sure, that's why we shouldn't mask those interrupts:-) If they do get masked and missed, I do not know, if the interrupt remains pending in this case, because they never get detected then:) > > 2009/11/9 Guennadi Liakhovetski : > > Hi Ian > > > > Why did you drop all CCs? > > > > On Mon, 9 Nov 2009, Ian Molton wrote: > > > >> I havent looked at the consequences for the driver if a insert IRQ > >> occurs during IO, however it seems logical that we should not > >> permanently mask the IRQ. > >> > >> I presume that the IRQ remains pending? > > > > Don't know, never checked. Is this important to know? > > > > Thanks > > Guennadi > > > >> > >> 2009/11/6 Guennadi Liakhovetski : > >> > On SuperH platforms the SDHI controller does not produce any command IRQs > >> > after a completed IO. This leads to card-detect interrupts staying > >> > disabled. Do not disable card-detect interrupts on DATA IRQs. > >> > > >> > Signed-off-by: Guennadi Liakhovetski > >> > --- > >> > > >> > Marked as RFC because I'm not really sure this is a correct approach to > >> > fix this problem, and whether this will have negative effect on other > >> > tmio_mmc MFD users. > >> > > >> > diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h > >> > index c676767..0b31d44 100644 > >> > --- a/drivers/mmc/host/tmio_mmc.h > >> > +++ b/drivers/mmc/host/tmio_mmc.h > >> > @@ -55,10 +55,8 @@ > >> >  /* Define some IRQ masks */ > >> >  /* This is the mask used at reset by the chip */ > >> >  #define TMIO_MASK_ALL           0x837f031d > >> > -#define TMIO_MASK_READOP  (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND | \ > >> > -               TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) > >> > -#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND | \ > >> > -               TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) > >> > +#define TMIO_MASK_READOP  (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND) > >> > +#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND) > >> >  #define TMIO_MASK_CMD     (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \ > >> >                TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) > >> >  #define TMIO_MASK_IRQ     (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD) Thanks Guennadi --- Guennadi Liakhovetski, Ph.D. Freelance Open-Source Software Developer http://www.open-technology.de/