From: jon bird <news@onastick.clara.co.uk>
To: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Nova/dib0700/i2C write failed
Date: Fri, 28 Nov 2008 15:02:28 +0000 [thread overview]
Message-ID: <XE4pEqAEgAMJFw9N@onasticksoftware.net> (raw)
In-Reply-To: <1227819747.7014.58.camel@watkins-desktop>
In article <1227819747.7014.58.camel@watkins-desktop>, Robert Watkins
<robert@watkin5.net> writes
>On Thu, 2008-11-27 at 09:48 +0100, Holger Rusch wrote:
> As written before.
> I got an MB with SB700 USB Chipset and it seems to have the same
> problems as the SB600 with the USB ports (disconnects here and
> then).
> The SB400 seems to have them also?
>
[...]
>My Hauppauge Nova-T 500 Dual DVB-T is a PCI card with built in VIA USB
>controller.
>
>watkins@watkins-desktop:~$ lspci -vv | grep -i usb
>00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host
>Controller (rev 80) (prog-if 10 [OHCI])
>00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host
>Controller (rev 80) (prog-if 10 [OHCI])
>00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host
>Controller (rev 80) (prog-if 20 [EHCI])
>02:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
>Controller (rev 62) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>02:01.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
>Controller (rev 62) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>02:01.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65)
>(prog-if 20 [EHCI])
> Subsystem: VIA Technologies, Inc. USB 2.0
>
Here's mine:
/usr/local/sbin/lspci -v | grep -i usb
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80) (prog-if 00 [UHCI])
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80) (prog-if 00 [UHCI])
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80) (prog-if 00 [UHCI])
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if
20 [EHCI])
so could be the same chipset as on your PCI card but it's not an SBxxx
chipset. If it *is* the controller mind you would expect it to be
susceptible to all sorts of USB devices not just this one.
--
== jon bird - software engineer
== <reply to address _may_ be invalid, real mail below>
== <reduce rsi, stop using the shift key>
== posted as: news 'at' onastick 'dot' clara.co.uk
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-11-28 15:03 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-22 21:43 [linux-dvb] Nova/dib0700/i2C write failed jon bird
2008-11-24 11:04 ` Holger Rusch
2008-11-24 19:34 ` jon bird
2008-11-24 20:02 ` Nicolas Will
2008-11-24 21:29 ` Richard Palmer
2008-11-25 20:19 ` Robert Watkins
2008-11-25 20:29 ` Devin Heitmueller
2008-11-27 8:48 ` Holger Rusch
2008-11-27 21:02 ` Robert Watkins
2008-11-28 15:02 ` jon bird [this message]
2008-11-28 16:15 ` Holger Rusch
2008-11-27 20:21 ` Robert Watkins
2008-11-25 19:30 ` jon bird
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=XE4pEqAEgAMJFw9N@onasticksoftware.net \
--to=news@onastick.clara.co.uk \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox