Re: [PATCH 3/8] media: imx-pxp: extract helper function to setup data path

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Michael,

Thank you for the patch.

On Thu, Jan 05, 2023 at 02:47:24PM +0100, Michael Tretter wrote:
> The driver must configure the data path through the Pixel Pipeline.
> 
> Currently, the driver is using a fixed setup, but once there are
> different pipeline configurations, it is helpful to have a dedicated
> function for determining the register value for the data path.
> 
> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/media/platform/nxp/imx-pxp.c | 62 +++++++++++++++++++---------
>  1 file changed, 42 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/media/platform/nxp/imx-pxp.c b/drivers/media/platform/nxp/imx-pxp.c
> index 05abe40558b0..a957fee88829 100644
> --- a/drivers/media/platform/nxp/imx-pxp.c
> +++ b/drivers/media/platform/nxp/imx-pxp.c
> @@ -726,6 +726,47 @@ static void pxp_setup_csc(struct pxp_ctx *ctx)
>  	}
>  }
>  
> +static u32 pxp_data_path_ctrl0(struct pxp_ctx *ctx)
> +{
> +	u32 ctrl0;
> +
> +	ctrl0 = 0;
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX15_SEL(0);
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX14_SEL(1);
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX13_SEL(0);
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX12_SEL(0);
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX11_SEL(0);
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX10_SEL(0);
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX9_SEL(1);
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX8_SEL(0);
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX7_SEL(0);
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX6_SEL(0);
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX5_SEL(0);
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX4_SEL(0);
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX3_SEL(0);
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX2_SEL(0);
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX1_SEL(0);
> +	ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX0_SEL(0);
> +
> +	return ctrl0;
> +}
> +
> +static void pxp_set_data_path(struct pxp_ctx *ctx)
> +{
> +	struct pxp_dev *dev = ctx->dev;
> +	u32 ctrl0;
> +	u32 ctrl1;
> +
> +	ctrl0 = pxp_data_path_ctrl0(ctx);
> +
> +	ctrl1 = 0;
> +	ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX17_SEL(1);
> +	ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX16_SEL(1);
> +
> +	writel(ctrl0, dev->mmio + HW_PXP_DATA_PATH_CTRL0);
> +	writel(ctrl1, dev->mmio + HW_PXP_DATA_PATH_CTRL1);
> +}
> +
>  static int pxp_start(struct pxp_ctx *ctx, struct vb2_v4l2_buffer *in_vb,
>  		     struct vb2_v4l2_buffer *out_vb)
>  {
> @@ -912,26 +953,7 @@ static int pxp_start(struct pxp_ctx *ctx, struct vb2_v4l2_buffer *in_vb,
>  	/* bypass LUT */
>  	writel(BM_PXP_LUT_CTRL_BYPASS, dev->mmio + HW_PXP_LUT_CTRL);
>  
> -	writel(BF_PXP_DATA_PATH_CTRL0_MUX15_SEL(0)|
> -	       BF_PXP_DATA_PATH_CTRL0_MUX14_SEL(1)|
> -	       BF_PXP_DATA_PATH_CTRL0_MUX13_SEL(0)|
> -	       BF_PXP_DATA_PATH_CTRL0_MUX12_SEL(0)|
> -	       BF_PXP_DATA_PATH_CTRL0_MUX11_SEL(0)|
> -	       BF_PXP_DATA_PATH_CTRL0_MUX10_SEL(0)|
> -	       BF_PXP_DATA_PATH_CTRL0_MUX9_SEL(1)|
> -	       BF_PXP_DATA_PATH_CTRL0_MUX8_SEL(0)|
> -	       BF_PXP_DATA_PATH_CTRL0_MUX7_SEL(0)|
> -	       BF_PXP_DATA_PATH_CTRL0_MUX6_SEL(0)|
> -	       BF_PXP_DATA_PATH_CTRL0_MUX5_SEL(0)|
> -	       BF_PXP_DATA_PATH_CTRL0_MUX4_SEL(0)|
> -	       BF_PXP_DATA_PATH_CTRL0_MUX3_SEL(0)|
> -	       BF_PXP_DATA_PATH_CTRL0_MUX2_SEL(0)|
> -	       BF_PXP_DATA_PATH_CTRL0_MUX1_SEL(0)|
> -	       BF_PXP_DATA_PATH_CTRL0_MUX0_SEL(0),
> -	       dev->mmio + HW_PXP_DATA_PATH_CTRL0);
> -	writel(BF_PXP_DATA_PATH_CTRL1_MUX17_SEL(1) |
> -	       BF_PXP_DATA_PATH_CTRL1_MUX16_SEL(1),
> -	       dev->mmio + HW_PXP_DATA_PATH_CTRL1);
> +	pxp_set_data_path(ctx);
>  
>  	writel(0xffff, dev->mmio + HW_PXP_IRQ_MASK);
>  

-- 
Regards,

Laurent Pinchart