From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Biju Das <biju.das.jz@bp.renesas.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das@bp.renesas.com>,
Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH v13 3/5] media: renesas: vsp1: Add support for VSP software version
Date: Sat, 27 Aug 2022 03:48:42 +0300 [thread overview]
Message-ID: <Ywlp6i8xYg7rAIt1@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20220825132144.2619239-4-biju.das.jz@bp.renesas.com>
Hi Biju,
Thank you for the patch.
On Thu, Aug 25, 2022 at 02:21:42PM +0100, Biju Das wrote:
> The VSPD block on RZ/G2L SoCs does not have a version register.
>
> This patch adds support for adding VSP software version based on
> device match.
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> v12->v13:
> * No change
> v11->v12:
> * No change
> v10->v11:
> * No change
> v9->v10:
> * No change
> v8->v9:
> * Added Rb tag from Geert
> * Updated commit description RZ/G2L -> RZ/G2L SoCs.
> * Replaced break with return info in case a Model match is found and
> removed additional check for non-match case.
> v8:
> * New patch
> ---
> drivers/media/platform/renesas/vsp1/vsp1.h | 1 +
> .../media/platform/renesas/vsp1/vsp1_drv.c | 43 +++++++++++++------
> .../media/platform/renesas/vsp1/vsp1_regs.h | 2 +
> 3 files changed, 33 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/media/platform/renesas/vsp1/vsp1.h b/drivers/media/platform/renesas/vsp1/vsp1.h
> index baf898d577ec..ff4435705abb 100644
> --- a/drivers/media/platform/renesas/vsp1/vsp1.h
> +++ b/drivers/media/platform/renesas/vsp1/vsp1.h
> @@ -67,6 +67,7 @@ struct vsp1_device_info {
> unsigned int uif_count;
> unsigned int wpf_count;
> unsigned int num_bru_inputs;
> + u8 soc;
> bool uapi;
> };
>
> diff --git a/drivers/media/platform/renesas/vsp1/vsp1_drv.c b/drivers/media/platform/renesas/vsp1/vsp1_drv.c
> index 975e6851735e..223dd5f557ba 100644
> --- a/drivers/media/platform/renesas/vsp1/vsp1_drv.c
> +++ b/drivers/media/platform/renesas/vsp1/vsp1_drv.c
> @@ -817,11 +817,39 @@ static const struct vsp1_device_info vsp1_device_infos[] = {
> },
> };
>
> +static const struct vsp1_device_info *vsp1_lookup_info(struct vsp1_device *vsp1)
> +{
> + const struct vsp1_device_info *info;
> + unsigned int i;
> +
> + /*
> + * Try the info stored in match data first for devices that don't have
> + * a version register.
> + */
> + info = of_device_get_match_data(vsp1->dev);
> + if (info) {
> + vsp1->version = VI6_IP_VERSION_VSP_SW | info->version | info->soc;
> + return info;
> + }
> +
> + vsp1->version = vsp1_read(vsp1, VI6_IP_VERSION);
> +
> + for (i = 0; i < ARRAY_SIZE(vsp1_device_infos); ++i) {
> + info = &vsp1_device_infos[i];
> +
> + if ((vsp1->version & VI6_IP_VERSION_MODEL_MASK) == info->version)
> + return info;
> + }
> +
> + dev_err(vsp1->dev, "unsupported IP version 0x%08x\n", vsp1->version);
> +
> + return NULL;
> +}
> +
> static int vsp1_probe(struct platform_device *pdev)
> {
> struct vsp1_device *vsp1;
> struct device_node *fcp_node;
> - unsigned int i;
> int ret;
> int irq;
>
> @@ -877,19 +905,8 @@ static int vsp1_probe(struct platform_device *pdev)
> if (ret < 0)
> goto done;
>
> - vsp1->version = vsp1_read(vsp1, VI6_IP_VERSION);
> -
> - for (i = 0; i < ARRAY_SIZE(vsp1_device_infos); ++i) {
> - if ((vsp1->version & VI6_IP_VERSION_MODEL_MASK) ==
> - vsp1_device_infos[i].version) {
> - vsp1->info = &vsp1_device_infos[i];
> - break;
> - }
> - }
> -
> + vsp1->info = vsp1_lookup_info(vsp1);
> if (!vsp1->info) {
> - dev_err(&pdev->dev, "unsupported IP version 0x%08x\n",
> - vsp1->version);
> vsp1_device_put(vsp1);
> ret = -ENXIO;
> goto done;
> diff --git a/drivers/media/platform/renesas/vsp1/vsp1_regs.h b/drivers/media/platform/renesas/vsp1/vsp1_regs.h
> index fae7286eb01e..4286d13eca32 100644
> --- a/drivers/media/platform/renesas/vsp1/vsp1_regs.h
> +++ b/drivers/media/platform/renesas/vsp1/vsp1_regs.h
> @@ -781,6 +781,8 @@
> #define VI6_IP_VERSION_SOC_E3 (0x04 << 0)
> #define VI6_IP_VERSION_SOC_V3U (0x05 << 0)
>
> +#define VI6_IP_VERSION_VSP_SW (0xfffe << 16) /* SW VSP version */
> +
> /* -----------------------------------------------------------------------------
> * RPF CLUT Registers
> */
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2022-08-27 0:48 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-25 13:21 [PATCH v13 0/5] Add support for RZ/G2L VSPD Biju Das
2022-08-25 13:21 ` [PATCH v13 1/5] media: dt-bindings: media: renesas,vsp1: Document RZ/G2L VSPD bindings Biju Das
2022-08-25 13:58 ` Krzysztof Kozlowski
2022-08-25 13:21 ` [PATCH v13 2/5] media: renesas: vsp1: Add support to deassert/assert reset line Biju Das
2022-08-25 13:30 ` Philipp Zabel
2022-08-27 0:45 ` Laurent Pinchart
2022-08-27 16:07 ` Biju Das
2022-08-27 18:26 ` Laurent Pinchart
2022-08-25 13:21 ` [PATCH v13 3/5] media: renesas: vsp1: Add support for VSP software version Biju Das
2022-08-27 0:48 ` Laurent Pinchart [this message]
2022-08-25 13:21 ` [PATCH v13 4/5] media: renesas: vsp1: Add VSP1_HAS_NON_ZERO_LBA feature bit Biju Das
2022-08-27 0:55 ` Laurent Pinchart
2022-08-27 16:10 ` Biju Das
2022-08-25 13:21 ` [PATCH v13 5/5] media: renesas: vsp1: Add support for RZ/G2L VSPD Biju Das
2022-08-27 0:56 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Ywlp6i8xYg7rAIt1@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=Chris.Paterson2@renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=biju.das@bp.renesas.com \
--cc=geert+renesas@glider.be \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox