Re: [PATCH v2 2/3] lib/vsprintf: Add support for generic FOURCCs by extending %p4cc

["andriy.shevchenko@linux.intel.com" <andriy.shevchenko@linux.intel.com>]

On Mon, Feb 24, 2025 at 10:18:48AM +0000, Aditya Garg wrote:
> 
> 
> > On 24 Feb 2025, at 3:28 PM, andriy.shevchenko@linux.intel.com wrote:
> > 
> > On Sat, Feb 22, 2025 at 03:46:03PM +0000, Aditya Garg wrote:
> >>>> On 20 Feb 2025, at 10:09 PM, Aditya Garg <gargaditya08@live.com> wrote:
> >>> 
> >>> %p4cc is designed for DRM/V4L2 FOURCCs with their specific quirks, but
> >>> it's useful to be able to print generic 4-character codes formatted as
> >>> an integer. Extend it to add format specifiers for printing generic
> >>> 32-bit FOURCCs with various endian semantics:
> >>> 
> >>> %p4ch   Host-endian
> >>> %p4cl Little-endian
> >>> %p4cb Big-endian
> >>> %p4cr Reverse-endian
> >>> 
> >>> The endianness determines how bytes are interpreted as a u32, and the
> >>> FOURCC is then always printed MSByte-first (this is the opposite of
> >>> V4L/DRM FOURCCs). This covers most practical cases, e.g. %p4cr would
> >>> allow printing LSByte-first FOURCCs stored in host endian order
> >>> (other than the hex form being in character order, not the integer
> >>> value).
> > 
> > ...
> > 
> >> BTW, after looking at the comments by Martin [1], its actually better to use
> >> existing specifiers for the appletbdrm driver.  The driver needs the host
> >> endian as proposed by this patch, so instead of that, we can use %.4s
> > 
> > Do you mean this patch will not be needed? If this a case, that would be the
> > best solution.
> 
> I tested with %4pE, and the results are different from expected. So this
> would be preferred. Kindly see my latest email with a proposed workaround for
> the sparse warnings.

%.4s sounded okay, but %4pE is always about escaping and the result may occupy
%4x memory (octal escaping of non-printable characters). Of course, you may vary
the escaping classes, but IIRC the octal or hex escaping is unconditional.

> >> [1]: https://lore.kernel.org/asahi/E753B391-D2CB-4213-AF82-678ADD5A7644@cutebit.org/
> >> 
> >> Alternatively we could add a host endian only. Other endians are not really
> >> used by any driver AFAIK. The host endian is being used by appletbdrm and
> >> Asahi Linux’ SMC driver only.

-- 
With Best Regards,
Andy Shevchenko