Linux Media Controller development
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: Hao Yao <hao.yao@intel.com>
Cc: Arec Kao <arec.kao@intel.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	linux-media@vger.kernel.org, Bingbu Cao <bingbu.cao@intel.com>
Subject: Re: [PATCH 2/2] media: i2c: ov13b10: Support 2 lane mode
Date: Tue, 11 Mar 2025 08:17:09 +0000	[thread overview]
Message-ID: <Z8_xhcfqWs27GZee@kekkonen.localdomain> (raw)
In-Reply-To: <b1dd819b-89f0-4962-907b-29eaadd58ae3@intel.com>

Hi Hao,

On Tue, Mar 11, 2025 at 02:42:57PM +0800, Hao Yao wrote:
> Hi Sakari,
> 
> On 2025/3/10 15:14, Sakari Ailus wrote:
> > Hi Hao,
> > 
> > On Mon, Mar 10, 2025 at 12:06:04PM +0800, Hao Yao wrote:
> > > > > @@ -1459,12 +1539,25 @@ static int ov13b10_check_hwcfg(struct device *dev)
> > > > >    	if (ret)
> > > > >    		return ret;
> > > > > -	if (bus_cfg.bus.mipi_csi2.num_data_lanes != OV13B10_DATA_LANES) {
> > > > > +	dlane = bus_cfg.bus.mipi_csi2.num_data_lanes;
> > > > > +	if (dlane != OV13B10_4_DATA_LANES && dlane != OV13B10_2_DATA_LANES) {
> > > > >    		dev_err(dev, "number of CSI2 data lanes %d is not supported",
> > > > > -			bus_cfg.bus.mipi_csi2.num_data_lanes);
> > > > > +			dlane);
> > > > >    		ret = -EINVAL;
> > > > >    		goto out_err;
> > > > >    	}
> > > > > +	ov13b->data_lanes = dlane;
> > > > > +	ov13b->supported_modes = supported_4_lanes_modes;
> > > > > +	ov13b->supported_modes_num = ARRAY_SIZE(supported_4_lanes_modes);
> > > > > +	if (dlane == OV13B10_2_DATA_LANES) {
> > > > > +		ov13b->supported_modes = supported_2_lanes_modes;
> > > > > +		ov13b->supported_modes_num =
> > > > > +			ARRAY_SIZE(supported_2_lanes_modes);
> > > > 
> > > > How about using switch() here?
> > > 
> > > How about:
> > > 	ov13b->data_lanes = bus_cfg.bus.mipi_csi2.num_data_lanes;
> > > 	switch (ov13b->data_lanes) {
> > > 	case OV13B10_4_DATA_LANES:
> > > 		ov13b->supported_modes = supported_4_lanes_modes;
> > > 		ov13b->supported_modes_num =
> > > 			ARRAY_SIZE(supported_4_lanes_modes);
> > > 		break;
> > > 
> > > 	case OV13B10_2_DATA_LANES:
> > > 		ov13b->supported_modes = supported_2_lanes_modes;
> > > 		ov13b->supported_modes_num =
> > > 			ARRAY_SIZE(supported_2_lanes_modes);
> > > 		break;
> > > 
> > > 	default:
> > > 		dev_err(dev, "number of CSI2 data lanes %d is not supported",
> > > 			ov13b->data_lanes);
> > > 		ret = -EINVAL;
> > > 		goto out_err;
> > > 	}
> > 
> > Looks good to me. I'd do the assignment to ov13b->data_lanes after checking
> > the value though.
> > 
> 
> Thank you, I will prepare v2 later.
> BTW, do you have any suggestions on patch 1/2 ?

That looks good to me.

-- 
Sakari Ailus

      reply	other threads:[~2025-03-11  8:17 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-07  9:31 [PATCH 1/2] media: i2c: ov13b10: Fix h_blank calculation Hao Yao
2025-03-07  9:31 ` [PATCH 2/2] media: i2c: ov13b10: Support 2 lane mode Hao Yao
2025-03-07  9:43   ` Sakari Ailus
2025-03-10  4:06     ` Hao Yao
2025-03-10  7:14       ` Sakari Ailus
2025-03-11  6:42         ` Hao Yao
2025-03-11  8:17           ` Sakari Ailus [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Z8_xhcfqWs27GZee@kekkonen.localdomain \
    --to=sakari.ailus@linux.intel.com \
    --cc=arec.kao@intel.com \
    --cc=bingbu.cao@intel.com \
    --cc=hao.yao@intel.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox