From: Simon Hobson <linux@thehobsons.co.uk>
To: video4linux-list@redhat.com
Subject: Problem setting up HVR-1110
Date: Wed, 31 Dec 2008 10:36:26 +0000 [thread overview]
Message-ID: <a06240804c580f44d7a48@simon.thehobsons.co.uk> (raw)
I've got MythTV installed and bought a Hauppage HVR-1110 card for it.
The card is detected and the saa7134 driver loaded - but that seems
to be it. Everything I can find suggests that the card should be
identified automatically (and the TDA1004X driver & firmware loaded),
but it isn't.
What I get in dmesg is :
>saa7130/34: v4l2 driver version 0.2.14 loaded
>PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
>saa7133[0]: found at 0000:00:00.0, rev: 209, irq: 17, latency: 32,
>mmio: 0xf4100000
>saa7133[0]: subsystem: 0070:6701, board: UNKNOWN/GENERIC [card=0,autodetected]
>saa7133[0]: board init: gpio is 6400000
>saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
>saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
>saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>saa7133[0]: registered device video0 [v4l2]
>saa7133[0]: registered device vbi0
and nothing at all about tda devices.
This doesn't change (apart from two lines referring to the ALSA
driver) when I add a config file containing :
>install saa7134 /sbin/modprobe --ignore-install saa7134 && {
>/sbin/modprobe saa7134-alsa; } && { /sbin/modprobe saa7134-dvb;}
>options saa7134 card=104
to /etc/modprobe.d
uname -a reports :
>Linux eddi 2.6.18-6-xen-amd64 #1 SMP Fri Dec 12 07:02:03 UTC 2008
>x86_64 GNU/Linux
Yes, this is running in a Xen guest - but I've also tried booting the
machine into a non-Xen mode (with non-Xen kernel) and it behaves
exactly the same. In both cases, the OS is Debian Lenny.
lspci says :
>00:00.0 Multimedia controller: Philips Semiconductors
>SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
lsmod | grep 'tda
> saa' says :
>saa7134_dvb 19460 0
>dvb_pll 20612 1 saa7134_dvb
>mt352 11780 1 saa7134_dvb
>video_buf_dvb 11396 1 saa7134_dvb
>nxt200x 18308 1 saa7134_dvb
>tda1004x 20100 1 saa7134_dvb
>firmware_class 15616 3 saa7134_dvb,nxt200x,tda1004x
>saa7134_alsa 18912 0
>snd_pcm 89352 2 saa7134_alsa,snd_pcm_oss
>snd 65384 8
>saa7134_alsa,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
>saa7134 130408 2 saa7134_dvb,saa7134_alsa
>video_buf 31108 4 saa7134_dvb,video_buf_dvb,saa7134_alsa,saa7134
>compat_ioctl32 13184 1 saa7134
>ir_kbd_i2c 14608 1 saa7134
>i2c_core 27776 7
>saa7134_dvb,dvb_pll,mt352,nxt200x,tda1004x,saa7134,ir_kbd_i2c
>ir_common 34692 2 saa7134,ir_kbd_i2c
>videodev 29696 1 saa7134
>v4l1_compat 16260 2 saa7134,videodev
>v4l2_common 28672 3 saa7134,compat_ioctl32,videodev
Any suggestions ?
--
Simon Hobson
Visit http://www.magpiesnestpublishing.co.uk/ for books by acclaimed
author Gladys Hobson. Novels - poetry - short stories - ideal as
Christmas stocking fillers. Some available as e-books.
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next reply other threads:[~2008-12-31 10:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-31 10:36 Simon Hobson [this message]
2008-12-31 13:43 ` Problem setting up HVR-1110 Simon Hobson
2009-01-01 15:38 ` hermann pitton
2009-01-01 16:30 ` Simon Hobson
2009-01-01 17:35 ` hermann pitton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a06240804c580f44d7a48@simon.thehobsons.co.uk \
--to=linux@thehobsons.co.uk \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox