Re: [PATCH] s2255drv: port to videobuf2

[Dean Anderson <linux-dev@sensoray.com>]

On 2014-02-04 04:04, Hans Verkuil wrote:
> Hi Dean,
> 
> On 02/03/14 18:06, Dean Anderson wrote:
>> On 2014-02-03 03:51, Hans Verkuil wrote:
>>> Hi Dean,
>>> 
>>> Some specific comments below, but first two general comments:
>>> 
>>> It is easier to review if at least the removal of the old s2255_fh 
>>> struct
>>> was done as a separate patch. It's always good to try and keep the 
>>> changes
>>> in patches as small as possible. The actual vb2 conversion is always 
>>> a
>>> 'big bang' patch, that's unavoidable, but it's easier if it isn't 
>>> mixed in
>>> with other changes that are not directly related to the vb2 
>>> conversion.
>> 
>> 
>> I figured removal of s2255_fh was a natural part of the videobuf2 
>> conversion process, but I can break it up.
> 
> It's more like the first phase of a vb2 conversion. It really is wrong
> for videobuf as well, so it makes sense to do that first.

Hans, if it's ok with you, I'd prefer to do it after the vb2 
conversion.  Right now, it's using SAA7134-style locking with resources 
in fh.  I could use "videobuf_queue_is_busy" from videobuf-core.c, but 
it has this comment "/* Locking: Only usage in bttv unsafe find way to 
remove */".

Thanks,

Dean




> 
>> I also did change some formatting and naming changes (s2255_channel 
>> to s2255_vc) that can be postponed.
> 
> Just put it in a separate patch either before or after the patch that 
> does
> the vb2 conversion.
> 
>> 
>>> 
>>> And did you also run the v4l2-compliance utility for this driver? 
>>> That's
>>> useful to check that everything it still correct.
>> 
>> Thanks for the comments.  I'll do a v2 soon with v4l2-compliance 
>> fully tested too.
> 
> Rather than the standard v4l2-compliance from v4l-utils, can you use 
> this
> from my own tree:
> 
> http://git.linuxtv.org/hverkuil/v4l-utils.git/shortlog/refs/heads/streaming
> 
> I've started work to add tests for streaming to v4l2-compliance. While 
> not
> complete it should cover what the s2255 driver needs. I'm very 
> interested
> in what it finds (or, as the case might be, what it doesn't find).
> 
> In order to do the streaming tests you have to run it with option -s.
> 
> Regards,
> 
> 	Hans