Re: [PATCH v9 7/7] arm64: dts: qcom: sdm670-google-sargo: add imx355 front camera

[Richard Acayan <mailingradian@gmail.com>]

On Mon, Feb 16, 2026 at 07:27:38PM -0500, Richard Acayan wrote:
> The Sony IMX355 is the front camera on the Pixel 3a, mounted in portrait
> mode. It is connected to CSIPHY1 and CCI I2C1, and uses MCLK2. Add
> support for it.
> 
> Co-developed-by: Robert Mader <robert.mader@collabora.com>
> Signed-off-by: Robert Mader <robert.mader@collabora.com>
> Signed-off-by: Richard Acayan <mailingradian@gmail.com>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> ---
>  .../boot/dts/qcom/sdm670-google-sargo.dts     | 95 +++++++++++++++++++
>  1 file changed, 95 insertions(+)
> 
(snip)
> +
> +&cci_i2c1 {
> +	camera@1a {
> +		compatible = "sony,imx355";
> +		reg = <0x1a>;
> +
> +		clocks = <&camcc CAM_CC_MCLK2_CLK>;
> +
> +		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
> +		assigned-clock-rates = <19200000>;
> +
> +		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
> +
> +		avdd-supply = <&cam_front_ldo>;
> +		dvdd-supply = <&cam_front_ldo>;
> +		dovdd-supply = <&cam_vio_ldo>;
> +
> +		pinctrl-0 = <&cam_mclk2_default>;
> +		pinctrl-names = "default";
> +
> +		rotation = <270>;
> +		orientation = <0>;
> +
> +		port {
> +			cam_front_endpoint: endpoint {
> +				link-frequencies = /bits/ 64 <360000000>;
> +				remote-endpoint = <&camss_endpoint1>;
> +			};

This also needs data-lanes.